DYNAVIN logo

DVN UFT02
Installation Guide

DYNAVIN DVN UFT02 CAN-Bus Adapter

CAN-bus adapter DVN UFT02

CAN-bus adapter for remote control of the most important functions of a Dynavin radio via steering wheel buttons, if present in the vehicle.

  • Supports multifunction steering wheel
  • Synchronisation of time
  • Synchronisation of language menu
  • For Fiat Ducato 2014-today
  • For vehicles that were delivered from the factory with the Fiat radio from the factory
  • Infotainment steering wheel adapter
  • Control via the steering wheel buttons
Scope of delivery

DYNAVIN DVN UFT02 CAN-Bus Adapter 1

For use in Citroen / Fiat depending on the original radio

DYNAVIN DVN UFT02 CAN-Bus Adapter 2

For use in Fiat with DCX without OBD box

DYNAVIN DVN UFT02 CAN-Bus Adapter 3

For use in Fiat with DCX with OBD box

DYNAVIN DVN UFT02 CAN-Bus Adapter 5

 


Dynavin GmbH
Siemensstr. 7
76316 Malsch
Germany
E-Mail: info@dynavin.de

© 2021 Dynavin GmbH
All rights reserved.
Reprinting and reproduction, even in part, is prohibited.

The characteristics of the products are correct at the time of creation of the printed product.
The colour of the products may vary.
We accept no liability for any typesetting errors.
Check with your dealer whether the actual specifications meet your requirements.
We reserve the right to make changes.

DVN UFT02 Installation Guide
Rev. 2.0

Documents / Resources

DYNAVIN DVN UFT02 CAN-Bus Adapter [pdf] Installation Guide
DVN UFT02, CAN-Bus Adapter

References

Leave a comment

Your email address will not be published. Required fields are marked *