Dsucot-logo

Dsucot Mira Extendable Table

Dsucot-Mira-Extendable-Table-product

Chair Assembly Instructions

Assemble the chair frame using parts A, B, C, D, E, F, G, H, and I as shown in the diagrams.

Specifications

Part Quantity
A 1
B 1
C 1
D 1
E 1
F 1
G 1
H 4
I 4

Dsucot-Mira-Extendable-Table- (14)

Accessories

Dsucot-Mira-Extendable-Table- (1)

Dsucot-Mira-Extendable-Table- (2)

Assembly Instructions

Step 1
Insert cam bolts (B) into the designated holes on the wooden panels labeled 2, 4, and 6.

Dsucot-Mira-Extendable-Table- (3)

Caution
Material use: Laminated particle board and frame. To use soft dry cloth. Do not use detergent or chemical. Avoid contact with water and direct sunlight. To be assembled on a soft, dry, clean, and smooth surface.

Step 2
Attach dowels (A) into the panels labeled 3, 5, and 9. Use 12 pcs of dowels.

Step 3
Attach panels 1, 8, and 11 using cam nuts (F) and catch clips (I). Use 16 pcs of cam nuts and 4 pcs of catch clips.

Dsucot-Mira-Extendable-Table- (4)

Step 4
Push the lever down to detach the end drawer slide. Use full extension slides (G) and screws (F).

Dsucot-Mira-Extendable-Table- (5)

Step 5
Attach full extension slides (G) to the panels labeled 6 using screws (F).

Step 6
Connect panels 6 and 9 using cam nuts (C). Use 4 pcs of cam nuts.

Dsucot-Mira-Extendable-Table- (6)

Step 7
Assemble the frame using panels 6, 9, 10, and 10A.

Step 8
Secure the frame with screws (E).

Dsucot-Mira-Extendable-Table- (7)

Step 9
Attach panel 11 to the frame using L-brackets (H) and screws (F).

Step 10
Attach panels 2, 3, 4, and 5 to the frame using cam nuts (C) and gliders (J).

Dsucot-Mira-Extendable-Table- (8)

Step 11
Secure the entire assembly with JCBC screws (D) and the Allen key (K).

Dsucot-Mira-Extendable-Table- (9)

Step 12
Extend Table Steps:

  1. Push panel 1 and panel 11 outward.
  2. Place panel 8 between panel 1 and 11.
  3. Push panel 1 and panel 11 inward.
  4. Secure the panels by locking the clip together.

Dsucot-Mira-Extendable-Table- (10)

Close Table Steps:

  1. Unlock the clip by pulling the metal clip.
  2. Push panel 1 and 11 outward.
  3. Insert panel 8 inside the table.
  4. Push back panel 1 and 11 inward.
  5. Secure the panels by locking the clip together.

 

Dsucot-Mira-Extendable-Table- (11) Dsucot-Mira-Extendable-Table- (12)

Complete
The table assembly is complete.

Dsucot-Mira-Extendable-Table- (13)

FAQ

  • What tools are required for assembly?
    An Allen key (included) is required for assembly.
  • Can the table be used outdoors?
    No, avoid contact with water and direct sunlight.
  • How do I extend the table?
    Follow the extend table steps provided in the instructions.

Documents / Resources

Dsucot Mira Extendable Table [pdf] User Guide
Miramye_C05, Mira Extendable Table, Mira, Extendable Table, Table

References

Leave a comment

Your email address will not be published. Required fields are marked *