DS18 Hydro NXL-6 2-Way Marine Speaker
FEATURES
- Marine/UTV 2-Way Speaker
- Continuous Power Handling 100W/125W 125W/150W RMS
- Peak Music Power 300W/375W 375W/450W MAX
- 25mm Titanium Dome PEI Surround Tweeter
- IP65 Marine Grade Compliant Specifications, 100% UV Stable
- Integrated RGB LED Lighting
- High Temp injection Molded Composite High Gloss Basket With UV Coating
- High Gloss injection Molded Composite ASA Grilles With UV Coating
- High Temp injection Molded Composite Grilles with Black Carbon Fiber Texture with 316 Metal Mesh (CF6&CF8)
- Motor Structure Use Y35 Ferrite Main Magnet And Reverse Neodymium Magnet
- Sensitivity 91dB /93dB at 1W/1M
- Nominal Impedance 4-Ohm
- Copper Ring Utilized In Motor Structure For Far-Field Performance
- Injection Molded, UV-Compliant, Polypropylene Cone, Butyl Surround
- RF Remote LED Controller Or WIFI Controller Option Available For Multi-Function RGB LED Lighting (Optional)
PACKING INCLUDE
- One Pair Marine/UTV Grade Speaker
- 2X1.5M #18 Speaker Input Wires With Fast Terminal
- 2X1.5M #22 RGB LED Power Input Wires With Fast Terminal
- 12XM4 Philips Inner Hex Head 304 Stainless Screw(3mm Hex Tool)
- Owners Manual
INSTALLATION
Installation Considerations before attempting to Install,
- Be sure to carefully read and understand the instructions before attempting to install these speakers.
- For safety. disconnect the negative battery terminal from the battery prior to beginning the installation.
- For easier assembly, we suggest you run all wires prior to mounting speakers in place
- Use high-quality connectors for a reliable installation and to minimize signal or power loss.
- Think before you drill! Be careful not to cut or drill into gas tanks, fuel lines, brake or hydraulic lines, vacuum lines or electrical wiring when working on any vehicle. If installing is in a boat, take care not to cut or drill through the main hull.
- Never run wires underneath the vehicle. Running the wires inside the vehicle or hull area provides the best protection.
- Avoid running wires over or through sharp edges. Use rubber or plastic grommets to protect any wires routed through metal, especially the firewall.
Mounting
- Determine where the speakers will be mounted. Ensure an area large enough for the speaker to mount Be sure that the mounting location is deep enough for the speaker to fit: only mount to a flat surface. Use extra caution when mounting on panels with urethane foam.
- Refer to the specification chart to determine the proper diameter hole to cut for your speaker model.
- Mark the locations for the mounting mews. Drill the holes with a 118″ bit.
- Feed the speaker wires through the cutout and connect to the speaker terminals. Be sure to observe proper polarity when connecting the wires. The speaker’s positive terminal is indicated with a” +”.
- Fit the speaker and mount into place using six (6) screws.
- Tighten the screws until the speaker is snug in place
- LED CONNECTIONS There are two options to choose from:
- Connect RGB Wires To RF RGB LED Controller Or WIFI RGB LED Controller (Optional)
- Connect To Battery(DC12V), Speaker RGB LED Fast Terminal ‘
- Connect To Battery Positive.
- Green ColorFast Terminal Cave: Ito Battery Negative
- Red Color: ‘FY Fast Terminal Connect to Battery Negative
- Blue I” Fast Terminal Connect to Battery Negative
- Purple Color.” and t Fast Terminal Connect to Battery Negative
- Yellow Color And ‘G’ Fast Terminal Corned so Battery Negative
- Cyan Color. AntI• Fast Terminal Connect to Battery Negative
- While Color.•R’ And ‘B’ And ‘G’ Fast Tontine] Connect to Battery Negative
SPECIFICATIONS
We Reserve The Right To Change Products And Specifications At Any Time Without Notice. Images May Or May Not Include Optional Equipment
Dimensions
FAQs
For marine applications, you need a speaker system that sounds well at high volume. Consider making an investment in speakers for ships that have superior sensitivity, durability, and power handling.
Two-way, or coaxial, speakers contain a second tweeter located inside the woofer in order to handle the high frequencies and accurately recreate the sound range of your music. Three-way or triaxial, speakers combine a midrange driver with a separate woofer and tweeter for increased depth and realism.
Amplification is a common feature of marine stereos, some of which are very potent. It is definitely possible to produce good sound without an external amplifier. The majority of the time, you can test your stereo without an amplifier first because you can almost always install one later.
The speakers that are best suited for usage in water are known as marine speakers. They are frequently water-resistant in addition to being more robust. The different exposures to moisture, climate, and weather are what marine speakers are made to withstand.
Marine surroundings can withstand products that are Marine Rated or Marine Grade. Marine-grade parts can be exposed to rain, wind, and the sun (although not necessarily submersion). When a little water is splashed on them, they won’t burn because they can survive high ambient temperatures.
Speakers called “marine” are designed specifically for use on boats. They will withstand the elements thanks to careful testing.
Sea speakers are built with sturdy materials to ensure their durability in the more demanding marine environment. They are comprised of special plastic and stainless steel components to endure the elements and to withstand unexpected temperature changes.
Two-way, or coaxial, speakers contain a second tweeter located inside the woofer in order to handle the high frequencies and accurately recreate the sound range of your music. Three-way or triaxial, speakers combine a midrange driver with a separate woofer and tweeter for increased depth and realism.
You should always install your full-range speakers as high as possible for the best sound quality. Do not mount them underneath seats or close to your feet. On larger vessels and other places where it is feasible, you should consider putting speakers over your head. Subwoofers, on the other hand, are the complete opposite.
The marine audio system, which is used to play music on boats, consists of a number of speakers, amplifiers, and other gadgets.
Between 80 Hz and 20 kHz, the marine speaker produces a strong full-range sound and has acceptable bass performance.
The majority of marine speakers are highly durable and strong. Make sure the speakers you buy are of excellent quality, resistant to rust and corrosion, and well-built. Look for speakers with plastic cones, such as those with polypropylene and neoprene rubber surrounds, for effective weather protection.
A battery may be charged from empty to fully charged in around 4 hours.
The leds are powered by a separate 12-volt source, and the speaker wire is on a different line.
No. Grill cannot be taken off.
