DS18-Hydro-logo

DS18 Hydro NXL-8 2-Way Marine Speaker

DS18-Hydro-NXL-8-2-Way-Marine-Speaker-Product

FEATURES

DS18-Hydro-NXL-8-2-Way-Marine-Speaker-fig-1

  • Marine/UTV 2-Way Speaker
  • Continuous Power Handling 100W/125W 125W/150W RMS
  • Peak Music Power 300W/375W 375W/450W MAX
  • 25mm Titanium Dome PEI Surround Tweeter
  • IP65 Marine Grade Compliant Specifications, 100% UV Stable
  • Integrated RGB LED Lighting
  • High Temp injection Molded Composite High Gloss Basket With UV Coating
  • High Gloss injection Molded Composite ASA Grilles With UV Coating
  • High Temp injection Molded Composite Grilles with Black Carbon Fiber Texture with 316 Metal Mesh (CF6&CF8)
  • Motor Structure Use Y35 Ferrite Main Magnet And Reverse Neodymium Magnet
  • Sensitivity 91dB /93dB at 1W/1M
  • Nominal Impedance 4-Ohm
  • Copper Ring Utilized In Motor Structure For Far-Field Performance
  • Injection Molded, UV-Compliant, Polypropylene Cone, Butyl Surround
  • RF Remote LED Controller Or WIFI Controller Option Available For Multi-Function RGB LED Lighting (Optional)

PACKING INCLUDE

  • One Pair Marine/UTV Grade Speaker
  • 2X1.5M #18 Speaker Input Wires With Fast Terminal
  • 2X1.5M #22 RGB LED Power Input Wires With Fast Terminal
  • 12XM4 Philips Inner Hex Head 304 Stainless Screw(3mm Hex Tool)
  • Owners Manual

INSTALLATION

DS18-Hydro-NXL-8-2-Way-Marine-Speaker-fig-2

Installation Considerations before attempting to Install,

  • Be sure to carefully read and understand the instructions before attempting to install these speakers.
  • For safety. disconnect the negative battery terminal from the battery prior to beginning the installation.
  • For easier assembly, we suggest you run all wires prior to mounting speakers in place
  • Use high-quality connectors for a reliable installation and to minimize signal or power loss.
  • Think before you drill! Be careful not to cut or drill into gas tanks, fuel lines, brake or hydraulic lines, vacuum lines or electrical wiring when working on any vehicle. If installing is in a boat, take care not to cut or drill through the main hull.
  • Never run wires underneath the vehicle. Running the wires inside the vehicle or hull area provides the best protection.
  • Avoid running wires over or through sharp edges. Use rubber or plastic grommets to protect any wires routed through metal, especially the firewall.

Mounting

  • Determine where the speakers will be mounted. Ensure an area large enough for the speaker to mount Be sure that the mounting location is deep enough for the speaker to fit: only mount to a flat surface. Use extra caution when mounting on panels with urethane foam.
  • Refer to the specification chart to determine the proper diameter hole to cut for your speaker model.
  • Mark the locations for the mounting mews. Drill the holes with a 118″ bit.
  • Feed the speaker wires through the cutout and connect to the speaker terminals. Be sure to observe proper polarity when connecting the wires. The speaker’s positive terminal is indicated with a” +”.
  • Fit the speaker and mount into place using six (6) screws.
  • Tighten the screws until the speaker is snug in place
  • LED CONNECTIONS There are two options to choose from:
    • Connect RGB Wires To RF RGB LED Controller Or WIFI RGB LED Controller (Optional)
    • Connect To Battery(DC12V), Speaker RGB LED Fast Terminal ‘
    • Connect To Battery Positive.
  • Green ColorFast Terminal Cave: Ito Battery Negative
  • Red Color: ‘FY Fast Terminal Connect to Battery Negative
  • Blue I” Fast Terminal Connect to Battery Negative
  • Purple Color.” and t Fast Terminal Connect to Battery Negative
  • Yellow Color And ‘G’ Fast Terminal Corned so Battery Negative
  • Cyan Color. AntI• Fast Terminal Connect to Battery Negative
  • While Color.•R’ And ‘B’ And ‘G’ Fast Tontine] Connect to Battery Negative

SPECIFICATIONS

DS18-Hydro-NXL-8-2-Way-Marine-Speaker-fig-3

We Reserve The Right To Change Products And Specifications At Any Time Without Notice. Images May Or May Not Include Optional Equipment

Dimensions

DS18-Hydro-NXL-8-2-Way-Marine-Speaker-fig-4

FAQs

What should I look for in a DS18 Hydro NXL-8 marine speaker?

You need a speaker system that sounds nice at high volume for marine applications. Think about investing in maritime speakers that have better power handling, durability, and sensitivity.

What are coaxial DS18 Hydro NXL-8 marine speakers?

In order to handle the high frequencies and precisely reproduce the sound spectrum of your music, two-way, or coaxial, speakers have a second tweeter housed inside the woofer. For more richness and realism, three-way, or triaxial, speakers combine a midrange driver with a separate woofer and tweeter.

Do you need an amp for DS18 Hydro NXL-8 marine speakers?

The majority of maritime stereos come equipped with an amplifier, some of which are very powerful. Without an external amplifier, good sound is definitely feasible. Almost always, you can add an amplifier later, so I advise most people to test their stereo without one first.

What is different about a DS18 Hydro NXL-8 marine speaker?

Marine speakers are those that are more suitable for use in the water. They are typically more durable in addition to being water-resistant. Marine speakers are designed to withstand various exposures to moisture, climate, and weather.

Can DS18 Hydro NXL-8 marine speakers get wet?

Products that are Marine Grade or Marine Rated can endure marine environments. Marine-grade components can be exposed to the sun and wind as well as moisture (although not necessarily submersion). They can withstand high ambient temperatures and won’t burn if a little water is splashed on them.

How long do DS18 Hydro NXL-8 marine speakers last?

Marine speakers are made specifically for use on boats. Thorough testing guarantees that they will withstand the elements.

What are DS18 Hydro NXL-8 marine speakers made of?

Heavy-duty materials are used to construct marine speakers to ensure their durability in the more challenging marine environment. They are made of stainless steel components to withstand sudden temperature changes, as well as special plastic to withstand the elements.

What is a DS18 Hydro NXL-8 two-way marine speaker?

In order to handle the high frequencies and precisely reproduce the sound spectrum of your music, two-way, or coaxial, speakers have a second tweeter housed inside the woofer. For more richness and realism, three-way, or triaxial, speakers combine a midrange driver with a separate woofer and tweeter.

Where do DS18 Hydro NXL-8 marine speakers go?

For optimum sound quality, you should always install your full-range speakers as high as you can. Don’t mount them near your feet or under seats. You should think about mounting speakers above your head on bigger boats and wherever it is practical. On the other hand, subwoofers are the exact opposite.

What are DS18 Hydro NXL-8  marine speakers used for?

A set of speakers, amplifiers, and other devices are part of the marine audio system, which is used to play music on boats.

Do DS18 Hydro NXL-8 marine speakers have good bass?

The maritime speaker has passable bass performance and a solid full-range sound response between 80 Hz and 20 kHz.

Are DS18 Hydro NXL-8 Marine Speakers good?

Most marine speakers are incredibly long-lasting and sturdy. Make sure the speakers you are purchasing are high-quality, rust- and corrosion-resistant, and have sturdy construction. For good weather protection, look for speakers with plastic cones, such as those with polypropylene and neoprene rubber surrounds.

How many hours should I charge my DS18 Hydro NXL-8 boat speaker?

A completely charged battery may be charged from empty in roughly 4 hours.

Are the speakers wired in addition to the lights?

The speaker wire is on a separate line, and the leds are powered by a separate 12-volt source.

Do they mount with or without a grill?

No. The grill cannot be removed.

VIDEO

References

Leave a comment

Your email address will not be published. Required fields are marked *