RLL42SDA Dreame Bot D10 Plus Gen 2
Specifications
- Model: RLD32GD-EU-A00
- Manufacturer: Dreame Trading (Tianjin) Co., Ltd.
- Country of Origin: China
Product Information
This product is a smart device designed to assist with household cleaning tasks. It features LDS navigation technology, Wi-Fi connectivity, and various cleaning modes for efficient cleaning performance.
Usage Instructions
Getting Started
- Ensure the device is fully charged before use.
- Download the Dreamehome app on your smartphone.
Setting Up the Device
Follow the instructions on the app to connect the device to your Wi-Fi network.
Cleaning Modes
Choose from different cleaning modes based on your cleaning needs such as standard clean, spot clean, or edge clean.
Maintenance
Regularly empty the dustbin and clean the filters to maintain optimal performance.
FAQ
How do I troubleshoot issues with the device?
If you encounter any issues, refer to the troubleshooting section in the user manual for solutions. If problems persist, contact customer support.
How often should I clean the filters?
We recommend cleaning the filters every 2-4 weeks to ensure efficient operation of the device.
For more support, contact us via https://global.dreametech.com
Manufactured by: Dreame Trading (Tianjin) Co., Ltd.
Made in China
Safety Information
To avoid electric shock, fire or injury caused by improper use of the appliance, please read the user manual carefully before using the appliance and keep it for future reference.
Usage Restrictions
- This product should not be used by children younger than 8 years old nor persons with physical, sensory, intellectual deficiencies, or limited experience or knowledge without the supervision of a parent or guardian to ensure safe operation and to avoid any risks. Cleaning and maintenance shall not be performed by children without supervision.
- This appliance contains batteries that are only replaceable by skilled persons.
- Clear the area to be cleaned. Children shall not play with the appliance. Ensure children and pets are kept at a safe distance from the robot while it is operating.
- Do not install, charge or use the appliance in the bathrooms or around the pools.
- This product is for floor cleaning in a home environment only. Do not use it outdoors, on non-floor surfaces, or in a commercial or industrial setting.
- If the power cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.
- Do not use the robot in an area suspended above ground level without a protective barrier.
- Do not place the robot upside down. Do not use the LDS cover, robot cover, or bumper as a handle for the robot.
- Use the robot in environments with an ambient temperature above 0°C and below 40°C. Make sure there is no liquid or sticky substance on the floor.
- To prevent damage or harm from dragging, clear any loose objects from the floor, and remove cables or power cords on the cleaning path before operating the appliance.
- Remove fragile or small items from the floor to prevent the robot from bumping into and damaging them.
- Keep hair, fingers, and other body parts away from the suction opening of the robot.
- Do not operate the appliance in a room where an infant or child is sleeping.
- Do not place children, pets, or any item on top of the robot regardless of whether it is stationary or moving.
- Do not use the robot to clean any burning objects. Do not use the robot to pick up flammable or combustible liquids, corrosive gases, or undiluted acids or solvents.
- Do not vacuum hard or sharp objects. Do not use the appliance to pick up objects such as stones, large pieces of paper or any item that may clog the appliance.
- Plug must be removed from the socket-outlet before cleaning or maintaining the appliance.
- Do not wipe the robot or the base station with a wet cloth or rinse them with any liquid. After cleaning washable parts, fully dry the parts before reinstalling and using them.
- Please use this product in accordance with the instructions in the User Manual. Users are responsible for any loss or damage that arise from improper use of this product.
Batteries and Charging
- Do not use any third-party battery or base station with auto-empty. Use only with RCDD0202 supply unit.
- Do not attempt to disassemble, repair, or modify the battery or the base station with auto-empty on your own.
- Do not place the base station with auto-empty near a heat source.
- Do not use a wet cloth or wet hands to wipe or clean the charging contacts of the base station with auto-empty.
- Do not improperly dispose of old batteries. Unneeded batteries should be discarded at an appropriate recycling facility.
- If the power cord becomes damaged or broken, stop using it immediately and contact after-sales service.
- Make sure the robot is turned off when being transported and kept in its original packaging if possible.
- If the robot will not be used for an extended period, fully charge it, then turn it off and store it in a cool, dry place. Recharge the robot at least once every 3 months to avoid over-discharging the battery.
Laser Safety Information
The laser sensor in this product meets the IEC 60825-1:2014/EN 60825- 1:2014/A11:2021 Standard for Class 1 laser products. Please avoid direct eye contact with it during use.
CLASS 1 LASER PRODUCT
CONSUMER LASER PRODUCT
EN 50689:2021
CAUTION
In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that
- For indoor use only
- Read operator’s manual
Hereby, Dreame Trading(Tianjin)Co., Ltd. declares that the radio equipment type RLD32GD is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://global.dreametech.com
For detailed e-manual, please go to https://global.dreametech.com/pages/user-manuals-and-faqs
Product Overview
Package Contents
Preparing Your Home
- Before cleaning, please move away unstable, fragile, valuable or dangerous items, and clean up cables, cloths, toys, hard objects and sharp objects on the ground to avoid being entangled, scratched or knocked over by the robot and causing losses.
- Before cleaning, place a physical barrier at the edge of the stairs and sofa to ensure the secure and smooth operations of the robot.
- Open the door of the room to be cleaned, and put the furniture in its proper place to leave more space.
- To prevent the robot from not recognizing areas that need to be cleaned, do not stand in front of the robot, or in a threshold, hallway, or narrow places.
Note
- When operating the robot for the first time, follow it around while cleaning to remove any potential obstacles in time.
- Do not vacuum hard objects like stones, steel balls and toy parts, or sharp objects like construction waste, broken glass and nails, otherwise the ground may be scratched.
Before Use
- Place the Base Station and Connect to an Electrical Outlet
Place the base station on level ground against the wall. Insert the power cord into the base station and plug it into the socket.
Place the base station in a location that is as open as possible with a good Wi-Fi signal.
Note
- Make sure that no objects might block the signaling area.
- Remove any objects that are closer than 1.5 m from the front and 0.5 m from either side of the base station.
- Remove the Protections
- Install the Side Brush
Note: Install the side brush until it clicks into place. - Charge the Robot
When placing the robot, align the charging contacts at the bottom of the robot with the charging contacts of the base station, and the robot will automatically turn on and start charging.
Note: It is recommended to fully charge your robot before first time use.
Connecting with Dreamehome App
- Download Dreamehome App
Scan the QR code on the robot, or search “Dreamehome” in the app store to download and install the app.
Note
- Only 2.4GHz Wi-Fi is supported.
- Due to upgrades in the app software, the actual operations may differ from the directions in this manual. Please follow the instructions based on the current app version.
- Add Device
Open the Dreamehome app, tap
in the upper right corner, and scan the same QR code on the robot again to add the device. Please follow the prompts to finish the Wi-Fi connection.
Note: If you want to reset Wi-Fi, repeat step 2 and then follow the prompts to finish the Wi-Fi connection.
How to Use
Turn On/Off
Press and hold the button
for 3 seconds to turn on the robot. The power indicator should be illuminated. Place the robot onto the base station, the robot, move the robot away from the base station and press and hold the button for 3 seconds.
Fast Mapping
After configuring the network for the first time, follow the instructions in the app to quickly create a map. The robot will start mapping without cleaning. When the robot returns to the base station, the mapping process has been completed and the map will be saved automatically.
Start Cleaning
Press the button to start cleaning after the robot is turned on. The robot will accurately map out a route, methodically clean along the edges and walls, then finish by cleaning each room in an S-shaped pattern to ensure a thorough job.
Note
- It is recommended that the robot set out from the base station before cleaning. Do not move the base station while the robot is cleaning. This ensures that the robot returns to base station smoothly.
- After the robot completes the cleaning task and automatically returns to the base station, the base station will start auto-empty. More settings can be operated on the app.
Pause/Sleep
When the robot is running, press any button to pause it.
If the robot is paused for more than 10 minutes, it automatically enters the robot or base station, or use the app to wake up the robot.
Note:If the robot is paused and placed onto the base station, the current cleaning process will end.
Auto Resume Cleaning
If the battery is too low, the robot will automatically return to the base station to charge. After charging to the appropriate battery level, it will resume unfinished cleaning tasks.
Note: To use this function, please open it in the App.
Do Not Disturb (DND) Mode
When the robot is set to Do Not Disturb (DND) mode, the robot will be
DND mode is disabled by default at the factory. You can use the app to enable DND mode or modify the DND period. The DND period is 22:00–8:00 by default.
Note
- The scheduled cleaning tasks will be performed as usual during the DND period.
- The robot will resume cleanup where it left off after the DND period
Spot Cleaning
When the robot is on standby, press and hold the button for 3 seconds to enable the spot cleaning mode. In this mode, the robot cleans a square-shaped area of 1.5 × 1.5 meters around it and returns to its starting point once the spot cleaning is completed.
Robot Restarting
If the robot stops responding or cannot be turned off, press and hold the button for 10 seconds to forcefully turn it Off. Then, press and hold the button for 3 seconds to turn the robot on.;
Use Mopping Function
It is recommended that all floors are vacuumed at least three times before
- Dampen the mop pad and wring out excess water. Install the mop pad as shown in the diagram.
- Fill the tank with water.
Note
- Do not use detergent or disinfectant.
- Do not fill the water tank with hot water as this may cause the water tank to warp.
- Align the mopping module as indicated by the arrow, then slide it into the back of the robot until it clicks into place. Press the button or use the Dreamehome app to start cleaning.
Note
- It is not recommended to use the mopping function on carpets.
- Use the app to adjust the water flow as required.
- When the robot finishes a cleaning task and returns to the base station, remove the mopping module and wash the mop pad in time. To remove the water tank, slide the two release clips on the side of it to take it out.
Note: When the robot is charging or not in use, remove the mopping module, pour out all the remaining water in the water tank, and clean the mop pad to prevent mildew or odors.
Routine Maintenance
Parts
To keep the robot in good condition, it is recommended to refer to the accessory usage in the app or the following table for routine maintenance.
| Part | Maintenance Frequency | Replacement Period |
| Mop pad | After each use | Every 3 to 6 months |
| Main Brush | Once every 2 weeks | Every 6 to 12 months |
| Side Brush | Every 3 to 6 months | |
| Dust box’s filter | ||
| Base station’s signaling area | Once every month | / |
| Base station’s charging contacts | ||
| Base station’s auto-empty vents | ||
| Laser Distance Sensor (LDS) | ||
| Robot’s charging contacts |
| Part | Maintenance Frequency | Replacement Period |
| Robot’s auto-empty vents | Once every month | / |
| Bumper | ||
| Omnidirectional wheel | ||
| Return-to-Base Sensor | ||
| Bottom of the robot | ||
| Dust box |
Clean it as needed |
|
| Water Tank | ||
| Dust bag | / | Every 2 to 4 months |
Note: The replacement frequency will depend on your usage of the robot. If an exception occurs due to special circumstances, the parts should be replaced.
Mopping Module
- Slide the two release clips on the side of the water tank, remove the mopping module, mopping module, and pull the mop pad off the mopping module.
- Pour out the water in the tank. Clean the tank with water only and leave it to air dry before reinstalling.
Note: Do not directly expose the water tank to sunlight. - Clean the mop pad with water only and leave it to air dry before reinstalling.
Note: Remove the mop pad from the mopping module before cleaning it, and make sure dirty water does not flow back into the water outlet to avoid clogging. - If slow water flow occurs, or the water volume is not well-distributed, clean the air hole in the cover of the water tank.
Main Brush
- Press the brush guard clips inwards to remove the brush guard and lift the brush out of the robot.
- Pull out the brush covers at both ends of the brush as shown in the diagram. Use the provided cleaning tool to remove any hairs tangled in the brush. Reinstall the brush covers on both ends of the brush, and then reinstall the brush. Press on the brush guard to lock it in place.
Side Brush
Remove and clean the side brush.
Omnidirectional Wheel
Note
- Use a tool such as a small screwdriver to separate the axle and tire of the omnidirectional wheel. Do not use excessive force.
- Rinse the omnidirectional wheel under the running water and put it back after drying it completely.
Dust Box
- Open the robot’s cover and press the clip to remove the dust box.
- Open the dust box cover and empty the dust box as shown in the diagram.
Filter
- Remove the filter and tap its basket gently.
Note: Do not attempt to clean the filter with a brush, a finger or sharp objects to prevent damage. - Rinse the dust box and filter with clean water and dry them completely before reinstalling.
Note
- Rinse the dust box and filter with clean water only. Do not use any detergent.
- Use the dust box and filter only when they are completely dry.
Dust Bag
- Remove and discard the dust bag.
Note: Pulling outwards on the handle will seal the dust bag to prevent the dust and debris from accidentally falling out. - Remove the dust and debris from the filter with a dry cloth.
- Install a new dust bag.
- Put back the cover of the dust tank.
Robot Sensors
Wipe robot sensors by using a soft and dry cloth, as shown in the below figure
Note: A wet cloth can damage sensitive elements within the robot and the base station. Please use a dry cloth for cleaning.
Charging Contacts and Signaling Area
Clean the charging contacts and the signaling area with a soft and dry cloth.
Auto-empty Vents
Clean the auto-empty vents of the robot and the base station with a soft and dry cloth.
Air Duct
If the air duct is blocked, please clean it according to the following steps.
- Unscrew mounting screws on the air duct cover and remove the cover.
- Check whether the air duct is blocked by foreign objects. If any, clean them.
- Reinstall the air duct cover.
Battery
The robot contains a high-performance lithium-ion battery pack. Make sure that the battery remains well-charged for daily use to maintain optimal battery performance. If the robot is not used for an extended period of charge the robot at least once every three months.
Troubleshooting
| Problem | Solution |
| The robot will not turn on. |
|
| The robot will not charge. |
|
| The robot fails to connect to Wi-Fi. |
|
| The robot cannot find and return to the base station. |
|
| The robot gets stuck in front of the base station and cannot return to it. |
|
| Problem | Solution |
| the robot. If the problem persists, please contact after-sales service. | |
| The charging speed is slow. |
|
| The noise increases while the robot is operating. |
|
| The robot moves without following the set route. |
|
| The robot misses the rooms to be cleaned. |
|
| Problem | Solution |
| The robot will not resume cleaning after charging. |
|
| The base station cannot automatically empty the dust box. |
|
| No water comes out of the water tank, or only a little bit comes out. |
|
| Robot returns to the base station without performing auto-empty tasks. | DND mode prevents the robot from performing auto-empty tasks. |
For more support, contact us via https://global.dreametech.com .
Specifications
Robot
| Model | RLD32GD |
| Charging Time | Approx. 6 hours |
| Rated Voltage | 14.4 V |
| Rated Power | 75 W |
| Operation Frequency | 2400-2483.5 MHz |
| Maximum Output Power | < 20 dBm |
Under normal use of condition, this equipment should be kept a separation distance of at least 20 cm between the antenna and the body of the user.
Base Station with Auto-Empty
| Model | RCDD0202 |
| Rated Input | 220-240 V 50-60 Hz |
| Rated Output | 20 V 1 A |
| Rated Power
(during dust emptying) |
650 W |
Battery Disposal and Removal
The built-in lithium-ion battery contains substances that are hazardous to the environment. Before disposing of the battery, make sure the battery is removed by qualified technicians and discarded at an appropriate recycling facility.
- the battery must be removed from the appliance before it is scrapped;
- the appliance must be disconnected from the supply mains when removing the battery;
- the battery is to be disposed of safely.
CAUTION
- Before removing the battery, disconnect the power and run out the battery as much as possible.
- Unneeded batteries should be discarded at an appropriate recycling facility.
- Do not expose to high temperature environment to avoid risks of explosion.
- Under abusive conditions, liquid may be ejected from the battery. If contact occurs, flush with water and seek medical help.
Removal Guide
- Turn over the robot, use a proper tool to remove the screws on the back of the robot, and then remove the cover.
- Unplug the terminals between the battery and PCB board to remove the battery.
WEEE Information
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.
Documents / Resources
 |
DREAME RLL42SDA Dreame Bot D10 Plus Gen 2 [pdf] User Manual RLD32GD-EU-A00, RLL42SDA, RLL42SDA Dreame Bot D10 Plus Gen 2, RLL42SDA, Dreame Bot D10 Plus Gen 2, D10 Plus Gen 2, Plus Gen 2, Gen 2 |
