Dottsun IPB974 Remote Control
Specifications
- Brightness Levels: Dimmable from 10% to 100%
- Battery Life: Up to 320 hours on standby, 55 hours in active use
- Remote Control Type: RF Remote Control
- Detection Distance: 66ft without shelter
Product Usage Instructions
Power On and Off
- To power on the device, press the “Power ON” button on the remote control. The default brightness level is set to 50%. You can adjust the brightness using the dimming buttons.
- To power off the device, press the “Power OFF” button. The device will turn off completely.
Brightness Adjustment
- You can adjust the brightness level by using the dimming buttons on the remote control. The brightness is dimmable from 10% to 100%.
- Press the corresponding buttons to increase or decrease the brightness level as desired.
Timer Function
- The remote control features a timer function. Set the timer according to your preference by following the instructions provided in the user manual. The timer allows you to schedule automatic shut-off or other timed actions.
RF Remote Control
- The remote control operates using Radio Frequency (RF) technology. It has a detection distance of 66ft without any obstructions. When you press a button on the remote, the red indicator light will flash to indicate that the related feature is activated.
Brightness Dimmable
RF Remote Control
- The detection distance is 66ft without shelter.
- The red indicator light will flash when you press the button on the remote, which means the related feature is ON.
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
- The device has been evaluated to meet the general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Frequently Asked Questions
- Q: What should I do if the red indicator light does not flash when I press a button on the remote?
- A: If the red indicator light does not flash, first ensure that the batteries in the remote control are properly inserted and functional. If the issue persists, try resetting the remote control by removing and reinserting the batteries.
- Q: Can I use the device in areas with high levels of RF interference?
- A: The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restrictions. However, it is recommended to avoid areas with high levels of RF interference for optimal performance.
Documents / Resources
 |
Dottsun IPB974 Remote Control [pdf] Instructions IPB974, IPB974 Remote Control, Remote Control |