2AV7N-MINIPLAY Starrypad Mini Midi Controller
Donner MIDI Controller
Specifications:
- Model: Donner MIDI Controller
- Compliance: Canada radiation exposure limits
- RF Exposure: General RF exposure requirement met
- FCC Compliance: Part 15 of FCC Rules
Product Information:
The Donner MIDI Controller is designed to provide users with a
versatile and efficient way to control MIDI-compatible devices.
With compliance to radiation exposure limits and general RF
exposure requirements, this device ensures safe and reliable
operation.
Product Usage Instructions:
Safety Information:
Before using the Donner MIDI Controller, please read the manual
carefully to ensure safe operation. Follow all warnings and
guidelines provided to prevent any potential risks.
Setup:
- Connect the Donner MIDI Controller to your MIDI-compatible
device using the appropriate cables. - Power on the MIDI Controller and the connected device.
- Ensure that both devices are set to the correct MIDI channel
for communication.
Operation:
Once the setup is complete, you can start using the Donner MIDI
Controller to send control signals to your MIDI-compatible device.
Use the various buttons and knobs on the controller to manipulate
parameters on your connected device.
Maintenance:
Regularly clean the surface of the MIDI Controller with a soft,
dry cloth to prevent dust buildup. Avoid exposing the device to
extreme temperatures or moisture.
FAQ:
Q: Can the Donner MIDI Controller be used with all
MIDI-compatible devices?
A: Yes, the Donner MIDI Controller is designed to work with a
wide range of MIDI-compatible devices. Ensure proper setup and
configuration for optimal performance.
Q: How do I update the firmware of the Donner MIDI
Controller?
A: Firmware updates, if available, can be downloaded from the
official Donner website. Follow the instructions provided with the
firmware update file for smooth installation.
DONNER
MIDI CONTROLLER
…t”1.:., I]11111 Thank You for Choosing DONNER!
” ‘” ” Plea Raad Thl1 Manual Carefully Blf u
IC Warning
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This device complies with Canadian ICES-003 and RSS-247.
Radiation Exposure: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.
IC Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference. (2)This device must accept any interference received, including interference that may cause undesired operation.
WARNING Xi This symbl mans the product munot be discaded as household waste, and should be delivered to ·….; an appropriate collection facility fr recyclingPropr disposal and recycling helps protect natual
resources, human health and environment Fo more information on disposal and ecycling of thisproduct, contact your local municipality, disposal service, or shop where you bought this product.
EtJ <06>
Avertissement IC Cet appareil est conforme aux normes RSS sans licence d’Industrie Canada. L’opération est soumise aux deux conditions suivantes: (1) cet appareil ne doit pas causer d’interférences, et (2) cet appareil doit accepter toute interférence, y compris celle susceptible de provoquer un fonctionnement indésirable de l’appareil. Selon la réglementation d ‘Industrie Canada, cet émetteur radio ne peut fonctionner qu ‘en utilisant une antenne type et gain maximum (ou inférieur) approuvés pour Industrie Canada par l’émetteur. Réduire brouillage radioélectrique potentiel avec d’autres utilisateurs, le type d’antenne et son gain doivent être choisis que la puissance isotrope rayonnée équivalente (e.i.r.p.) n’est pas supérieure à celle nécessaire pour communication réussie. Cet appareil est conforme aux normes canadiennes ICES-003 et RSS-247. Exposition aux radiations: Cet équipement est conforme à la réglementation canadienne sur les radiations. limites d’exposition établies pour un environnement non contrôlé. Déclaration d’exposition aux radiations IC L’appareil a été évalué pour répondre aux exigences générales d’exposition aux RF. L’appareil peut être utilisé sans restriction dans des conditions d’exposition portables.
FR <12>
Documents / Resources
 |
DONNER 2AV7N-MINIPLAY Starrypad Mini Midi Controller [pdf] User Manual 2AV7N-MINIPLAY, 2AV7N-MINIPLAY Starrypad Mini Midi Controller, Starrypad Mini Midi Controller, Mini Midi Controller, Midi Controller, Controller |