INSTALLATION INSTRUCTIONS
‘S’ Control Rebuild Kits
CA67869P Series Control Rebuild Kit
NOTICE!
Installer: these instructions contain important safety information and must be forwarded to the boat owner.
WARNING!
This control must be entirely disassembled and re-assembled to install contents of these kits. Because proper assembly and cable adjustment is so important to the boat’s performance, we recommend this conversion be completed by a boat dealer or boat repair facility. In all cases, remove cables from control first.
Tools required
- Multi purpose marine grease to coat Nyliner bearing(s)
- Low strength thread-locker to coat threads of item 10 on re-assembly
- Philips head screwdriver
- Slotted head screwdriver
- Allen wrench 4 mm
- Torque wrench
S Series housing kit
Remove in order:
- Items 12, 13, 14, 15 to remove control from dash.
- Item 23.
- Item 20. Handle will pull out.
- Item 18.
- Items 17 & 28. Lower frame housing will be isolated.
- Items 10.
- Item 22 from housing.
Reassemble in reverse order.
Torque side screws, item 17, to 25–32 in. lb.
Item No. | Description | Single S Control | Twin S Control |
CA67864P | CA67865P | ||
16 22 9 8 17 28 23 |
ousing Bearing Top Plate Plate Screws Side Screws Side Washers Tapered Screw Instruction |
1 1 1 2 2 2 1 1 |
1 2 1 2 4 4 2 1 |
S Series handle kit
Remove in order:
- Items 12, 13, 14, 15 to remove control from dash.
- Item 23.
- Item 20. Handle will pull out.
- Item 18.
- Item 17 & item 28.
- Lower frame.
- Item 22 from item 16.
Reassemble in reverse order.
Item No. | Description | Single S Control | Twin S Control |
CA67866P | A67867P | ||
20 18 21 11 22 23 19 19 |
Handle Brake Pin Detent Screw Brake Screw Nyliner Bearing Tapered Screw Red Knob Black Knob Instruction |
1 1 1 1 1 1 1 1 1 |
2 1 2 2 2 2 1 1 1 |
S Series hardware replacement kit
- Items 12, 13, 14, 15 to remove control from dash.
- Item 23.
- Item 20. Handle will pull out.
- Item 18.
- Item 17 & item 28.
- Lower frame.
- Item 22 from item 16.
Item No. | Description | Single S Control | Twin S Control |
CA67868P | A67869P | ||
1 2 4 5 7 11 12 13 15 15 17 18 21 22 27 28 |
Cotter Pin Cable Pivot Shim Clamp Screw Brake Screw Mounting Screw Flat Washer Spring Washer Nut Side Screw Brake Pin Detent Screw Nyliner Bearing Nut Side Washer Instruction |
1 1 1 1 2 1 4 4 4 4 2 1 1 1 2 2 1 |
2 2 2 2 4 2 4 4 4 4 4 1 2 2 4 4 1 |
Parts illustration
Figure 1.
Copy Part# IS-67863, Rev. 9
Date: 05/2023YOUR LOCAL DEALER
dometic.com/dealer
YOUR LOCAL SUPPORT
dometic.com/contact
YOUR LOCAL SALES OFFICE
dometic.com/sales-offices
A complete list of Dometic companies, which comprise the Dometic Group, can be found in the public filings of:
DOMETIC GROUP AB
DOMETIC GROUP AB Hemvärnsgatan 15 SE-17154 Solna Sweden
4445104071 IS-67863
Documents / Resources
![]() |
DOMETIC CA67869P Series Control Rebuild Kit [pdf] Instruction Manual CA67864P, CA67865P, CA67866P, CA67867P, CA67868P, CA67869P, CA67869P Series Control Rebuild Kit, CA67869P Series, Control Rebuild Kit, Rebuild Kit, Kit |