dji FPV Combo FPV Drone User Guide
Download The App
DJI Fly App
Installation
Check battery level: press once.
Power on/off: press then press and hold.
Linking
Linking is required if the aircraft status indicator on the rear frame arm blinks yellow quickly after all the devices are powered on. a. Aircraft + Goggles
- Press and hold the power button on the goggles. The goggles will beep continually.
- Press and hold the power button of the aircraft until the battery level indicator blinks in sequence.
- The battery level indicator of the aircraft turns solid and displays the battery level. The goggles stop beeping when they are successfully linked and the video display is normal.
b. Aircraft + Remote Controller - Press and hold the power button of the aircraft until the battery level indicator blinks in sequence.
- Press and hold the power button of the remote controller until it beeps continually and the battery level indicator blinks in sequence.
- The remote controller stops beeping when successfully linked and both the battery level indicators turn solid and display the battery level.
The aircraft must be linked with the goggles before the remote controller.
Connect the USB-C port of the goggles to the mobile device with the USB-C OTG cable and a suitable data cable. Run DJI Fly on the mobile device and follow the prompts to activate the DJI devices.
Normal Mode
Start or stop motors
WE ARE HERE FOR YOU
Contact
D JI SUPPORT
SUBSCRIBE FOR MORE INFORMATION
DJI is a trademark of DJI.
Copyright © 2023 DJI All Rights Reserved
Documents / Resources
 |
dji FPV Combo FPV Drone [pdf] User Guide FPV Combo FPV Drone, FPV, Combo FPV Drone, FPV Drone |
