AVATA 2
Quick Start Guide
v1.0
[1]
[2]
Charge to Activate the Battery | 
- ≥30W USB PD
Charge to activate the Intelligent Flight Battery before using for the first time.
https://www.dji.com/avata-2/downloads
WE ARE HERE FOR YOU
Contact DJI SUPPORT
SUBSCRIBE FOR MORE INFO
This content is subject to change without prior notice.
DJI and DJI AVATA are trademarks of DJI.
Copyright © 2024 DJI All Rights Reserved.
YCBZSS00275202
[3]
[4]
Check battery level: press once.
Power on/off: press, then press and hold.
[5]
A. Linking
A
- DJI Goggles 3
- DJI Goggles 2
- DJI Goggles Integra
- DJI RC Motion 2
- DJI RC Motion 3
B. Activation
B
- USB-C
- Not Included in the Box
- DJI Fly App
Linking and Activation
Make sure that the devices used with the aircraft have been updated to the latest firmware version via the DJI ASSISTANT™ 2 (Consumer Drone Series) software (https://www.dji.com/ avata-2/downloads ) before linking and powering on all the devices.
Press the power button on the devices to stop the process if the linking fails. Connect the goggles to a mobile device, run the DJI Fly app, select Connection Guide, and then follow the on-screen instructions to link.
Documents / Resources
 |
dji AVATA 2 FPV Drone [pdf] User Guide AVATA 2 FPV Drone, AVATA 2, FPV Drone, Drone |
