Get help with DIRECTV error code 745 or 746

If you see errors 745 or 746, there may be a problem with your receiver’s access card. To resolve this issue, follow the steps below:

Solution 1: Check your receiver’s access card

1. Open the access card door on the front panel of your receiver and remove the access card.
Note: On some receiver models, the access card slot is on the right side of the receiver.

Get help with DIRECTV error code 745 or 746

2. Reinsert the access card. The chip should be facing down with the logo or picture facing up.

Still seeing the error message? Try Solution 2.

Solution 2: Reset your receiver

  1. Unplug your receiver’s power cord from the electrical outlet, wait 15 seconds and plug it back in.
    Get help with DIRECTV error code 745 or 746
  2. Press the Power button on the front panel of your receiver. Wait for your receiver to restart.

References

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Browse all questions about this manual

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. what is code 746
    que es el codigo 746

    luis angel sivira asks <em>what is code 746
    que es el codigo 746
    Manuals+ clarified question
    Question

    What is DIRECTV error code 746?

    Answer

    Error code 746 indicates that there may be a problem with your DIRECTV receiver's access card. To resolve this issue, please follow these steps:

    • Solution 1: Check the access card
      1. Open the access card door (usually on the front panel or right side of the receiver) and remove the card.
      2. Reinsert the card with the chip facing down and the logo or picture facing up.
    • Solution 2: Reset your receiver
      1. Unplug the power cord from the electrical outlet.
      2. Wait 15 seconds, then plug it back in.
      3. Press the Power button on the front panel and wait for the system to restart.

  2. ya saque la tarjeta y nada sigue lo mismo,dice reinicie su codificador lo e echo varias veces ya des de ayer en la noche estoy asi

    Yasmin guanare asks ya saque la tarjeta y nada sigue lo mismo,dice reinicie su codificador lo e echo varias veces ya des de ayer en la noche estoy asi
    Manuals+ clarified question
    Question

    I have already removed the access card and restarted the receiver several times since last night, but the error persists. What should I do?

    Answer

    Since you have already tried reinserting the access card and performing multiple resets without success, please verify the following details to ensure the steps were completed correctly:

    • Card Orientation: Ensure the access card is inserted with the chip facing down and the logo or picture facing up.
    • Power Cycle: Instead of just a restart, unplug the receiver's power cord from the electrical outlet for at least 15 seconds before plugging it back in.

    If the error persists after these steps, it likely indicates a hardware failure with the access card or the receiver's internal card reader. You will need to contact DIRECTV customer support to request a replacement access card or a technician visit to inspect the equipment.

  3. HELP ME PLEASE. I HAVE AN ERROR 745. A TECHNICIAN CAME TO MY HOUSE LAST WEEK, INCIDATED HE DID NOT HAVE THE CORRECT REPLACEMENT BOX, WOULD BE BACK. HAS NOT COME YET. I AM A SENIOR CITIZEN WOULD PREFERS 24/7 TV. I CURRENTLY HAVE NONE. PLEASE HELP ME!

    KAY STEPHENS asks HELP ME PLEASE. I HAVE AN ERROR 745. A TECHNICIAN CAME TO MY HOUSE LAST WEEK, INCIDATED HE DID NOT HAVE THE CORRECT REPLACEMENT BOX, WOULD BE BACK. HAS NOT COME YET. I AM A SENIOR CITIZEN WOULD PREFERS 24/7 TV. I CURRENTLY HAVE NONE. PLEASE HELP ME!
    Manuals+ clarified question
    Question

    How do I fix DIRECTV error code 745?

    Answer

    Error code 745 typically indicates a problem with your receiver's access card. While you wait for a technician, you can try these steps to restore your service:

    • Solution 1: Reseat the Access Card
      1. Open the access card door on the front or right side of your receiver.
      2. Remove the access card.
      3. Reinsert the card with the chip facing down and the logo facing up.
    • Solution 2: Reset the Receiver
      1. Unplug the power cord from the electrical outlet.
      2. Wait 15 seconds, then plug it back in.
      3. Press the Power button on the front panel and wait for the system to restart.

    If these steps do not work and your technician has not returned, please contact DIRECTV customer support directly to expedite your replacement box request, as Manuals+ is not affiliated with DIRECTV service scheduling.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.