DIRECTV Receiver Menu Update FAQ

Why did you change the menu?
We updated the DIRECTV menu playlist and guide experience so you can access, discover and manage your content quickly and easily.

What receivers will see the updated experience?

  • Genie models: HS17-100, HS17-500, HR44-200, HR44-500, HR44-700, HR54-200, HR54-500, HR54-700, H44-100, H44-500
  • Genie Mini models: C31-700, C41-100, C41-500, C41-700, C41W-100, C41W-500, C51-100, C51-500, C51-700, C61-100, C61-500, C61-700, C61K-700
  • DIRECTV ready TVs

Do I have to do anything with my equipment?
No. The update will be made automatically.

Can I switch back to the previous look and feel?
Once the new version is installed the newly improved experience is permanent.

Will I lose my DVR content?
No; there will be no impact to your saved DVR content and library. Just resume and enjoy.

I have a mix of equipment in my home. Which models will receive the new menu?
Due to software compatibility, the new look is available for the equipment models referenced above. If you have an older model (not listed above), the user interface will not change.

How do I navigate the new menu and other enhanced sections?
We encourage you to navigate our enhanced look and feel so you can discover new features as well as entertainment content.*
• Press [MENU] on the remote to access your favorite channels, recordings, exclusive content and On Demand faster.
• Press [LIST] on the remote to access and manage your recordings easily in our streamlined Recordings list.
• Press [-] on the remote from any screen to launch our improved search.

*Availability of content varies based on programming package subscription. Certain features require internet-connected Genie HD DVR.

References

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Browse all questions about this manual

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. My receiver will not change my channels

    Brandy Galicia asks My receiver will not change my channels
    Manuals+ clarified question
    Question

    Why is my DIRECTV receiver not changing channels?

    Answer

    If your DIRECTV receiver is not changing channels, please try the following troubleshooting steps:

    • Reset the Receiver: Locate the small red reset button (usually on the side of the receiver or inside the access card door) and press it. Wait for the system to reboot completely.
    • Check the Remote Control: Ensure there are no obstructions between the remote and the receiver. Try pressing the [GUIDE] button to see if the menu appears; if it does not, your remote batteries may need replacement or the remote may need to be re-paired.
    • Verify Signal: Ensure your receiver is not stuck on a specific screen or "Searching for Satellite Signal." If the menu works but channels do not change, try unplugging the power cord for 15 seconds and plugging it back in.
    • Check Compatibility: If you recently received the menu update, ensure you are using the [MENU] or [GUIDE] buttons to navigate as the interface layout has changed.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.