Home » DirecTV » DIRECTV error code 774 
This message means an error has been detected on your receiver’s hard drive. Try resetting your receiver to clear the error:
- Unplug your receiver’s power cord from the electric outlet, wait 15 seconds, and plug it back in.
- Press the Power button on the front panel of your receiver. Wait for your receiver to reboot.
If you still see an error message on your screen, please call 800.531.5000 for additional assistance.
References
Related Posts
-
DIRECTV error code 927This indicates an error in the processing of downloaded On Demand shows and movies. Please DELETE the recording…
-
DIRECTV error code 727This error indicates a sports “blackout” in your area. Try one of your local channels or regional sports…
-
DIRECTV error code 749On-screen message: “Multi-switch problem. Check that the cables are connected correctly and the multi-switch is working properly.” This…
-
DIRECTV error code 711This error might be caused by one of the following situations: Your receiver has not been activated for…
