Home » DirecTV » DIRECTV error code 711 
This error might be caused by one of the following situations:
- Your receiver has not been activated for DIRECTV® service.
- Your receiver has received only part of the data it needs to decode our satellite signal.
Follow these steps to check if your receiver is activated:
- Sign in to your directv.com account
- Click or tap “View My Equipment” in the My Snapshot section
Does the error message appear when you’re watching a live or recorded show?
References
Related Posts
-
DIRECTV error code 927This indicates an error in the processing of downloaded On Demand shows and movies. Please DELETE the recording…
-
DIRECTV error code 727This error indicates a sports “blackout” in your area. Try one of your local channels or regional sports…
-
DIRECTV error code 749On-screen message: “Multi-switch problem. Check that the cables are connected correctly and the multi-switch is working properly.” This…
-
DIRECTV error code 774This message means an error has been detected on your receiver’s hard drive. Try resetting your receiver to…
