1 | Make sure your phone original film is removed.
Clean the phone screen by cleaning kits.
(1) Use the “W et wipe” to clean the screen.
(2) Use the “Microfiber Cloth” to dry the screen.
(3) Use the “Dust-absorber” to absorb any dust on the screen.
2 | Position screen protector on phone screen and paste it.
(1) Peel off the release film of the protector.
(2) Position the “Installation tray” on the screen.
(3) Press by “T” track, please see the reference chart for sequential order
3 | Take off the “Installation tray” and remove excess air bubbles.
(1) Wait 20s and remove the “Installation tray”.
(2) If it has bubbles, don’t worry. Use your finger to push the bubble free.
(3) It’s Perfect.
4 | Reuse method, please keep the I installation tool
(1) Tear off the white double-sided tapes ( top two and the bottom one.)
(2) Align the upper 2 columns and the lower 2 columns.
(3) Press the position of the double-sided tape to make it stick firmly
5 | Clean the camera lens on your phone by cleaning kit.
(1) Use the “Wet wipe” to clean the camera lens.
(2) Position the protector on the camera lens.
(3) Press with your thumb to make sure install perfectly.
Documents / Resources
 |
DIMONCOAT 14 Pro Max Max Screen Protector with Camera Lens Protector [pdf] User Guide 14 Pro Max Max Screen Protector with Camera Lens Protector, 14 Pro Max, Max Screen Protector with Camera Lens Protector, Camera Lens Protector, Lens Protector |
