DESIGN ND5RC Trunk Spoiler
- All RK DESIGN products are designed for competition use in Japan.
- Product warranty and product liability insurance are not applied to accidents caused by product failures that occurred outside of Japan.
The RK DESIGN trunk spoiler is an unpainted fiberglass product.
- There is tolerance on our products due to handmade.
- Make adjustments and modifications before painting the trunk spoiler.
Usage Instructions
- Remove the OE Mazda emblem.
- Check the fitting of the trunk spoiler and the trunk rid. Make adjustments on the spoiler if needed.
- Paint the trunk spoiler after confirming the fitting is right.
- Paste the trunk spoiler to the trunk rid with adhesive or double-sided tape for sheet metal.
This manual is intended to inform the installation procedure to professional installers. Detailed process of fitting, adjustment and painting are omitted from the instruction.
Caution
- Operate with caution to prevent damaging the vehicle and parts.
- After completing installation, check again to make sure the entire unit is properly fixed.
RK DESIGN
Just Balance Co. Ltd.
245-8 Kaneamori, Moriyama Shiga, 524-0045 JAPAN
Email: sales@rkdesign.co.jp
Website: www.rkdesign.co.jp
Documents / Resources
 |
DESIGN ND5RC Trunk Spoiler [pdf] Instruction Manual ND5RC, NDERC, ND5RC Trunk Spoiler, ND5RC, Trunk Spoiler, Spoiler |
