エアロパーツデザイン製作販売 RK Design（アールケーデザイン）
Instruction Manual for DESIGN models including: ND5RC, NDERC, ND5RC Trunk Spoiler, ND5RC, Trunk Spoiler, Spoiler
File Info : application/pdf, 1 Pages, 639.65KB
DocumentDocumentMazda MX-5 ND5RC/NDERC TRUNK SPOILER Installation Manual All RK DESIGN products are designed for competition use in Japan. Product warranty and product liability insurance are not applied to accidents caused by product failures that occurred outside of Japan. The RK DESIGN trunk spoiler is an unpainted fiberglass product. There is tolerance on our products due to handmade. Make adjustments and modifications before painting the trunk spoiler. Remove the OE Mazda emblem. Check the fitting of the trunk spoiler and the trunk rid. Make adjustments on the spoiler if needed. Paint the trunk spoiler after confirming the fitting is right. Paste the trunk spoiler to the trunk rid with adhesive or double-sided tape for sheet metal. This manual is intended to inform the installation procedure to professional installers. Detailed process of fitting, adjustment and painting are omitted from the instruction. Caution - Operate with caution to prevent damaging the vehicle and parts. - After completing installation, check again to make sure the entire unit is properly fixed. RK DESIGN Just Balance Co. Ltd. 245-8 Kaneamori, Moriyama Shiga, 524-0045 JAPAN Email: sales@rkdesign.co.jp Website: www.rkdesign.co.jp