DENALI B09HSSS4RP Shank Round Nose Core Box Router Bit Set
4-Piece 1/4 in (0.635 cm) Shank Round Nose Core Box Router Bit Set
- 1/4″ shank round nose bit
- 5/16″ shank round nose bit
- 3/8″ shank round nose bit
- 1/2″ shank round nose bit
Important Safeguards
DANGER : Risk of suffocation, Keep any packaging materials away from children and pets – these materials are a potential source of danger, e.g. suffocation.
- Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included.
- Router bits can be very sharp. Wear protective gloves when fitting or changing router bits.
- Be careful when removing the packaging from the router bit. Always wear protective gloves (compliant to ANSI 105, EN ISO 21420 or EN 388) during the work.
- Always wear eye protection, hearing protection and a dust mask in the work area at all times.
- Discard immediately if any chipping or cracking of this product has occurred.
- Do not repair or regrind the router bits.
- Dull or damaged router bits must be discarded.
- Keep the product away from children and pets.
- product should only be used by persons of training and experience who have knowledge of how to use and handle the product.
Intended Use
- The product is designed for routing wood and wood based material in a router and may not be used for any other purpose. Always follow the router manufacturer’s instructions for use.
- The product can be used with softwoods or hardwoods.
- The router bits fit all types of routers, both automatic and portable routers.
Operation
CAUTION
Risk of injury! Router bits are sharp, take precautions when handling them.
NOTICE
- Before using the product, always check the size info marked on each router bit.
- The router bit rotates at a very high speed and may heat up if the router is moved too slowly through the wood which may cause burn marks.
Tips
- When working on outside edges, move the tool counter-clockwise. When working on inside edges, move the tool clockwise.
- Use the router bits for routing channels in cutting boards and counter tops, and to produce flutes in hardwoods.
- When cutting wood materials containing glue, the sharpness of the milling cutter is reduced faster compared to cutting softwoods and hardwoods.
- For a better finish for hardwoods, do a second pass, specially for extra large cuts.
- Perform practice cuts with scrap materials before working on the actual piece.
Cleaning and Storage
- To clean the product, wipe with a damp cloth. Rinse the parts and let all parts dry completely.
- Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product.
- Use a small brush or compressed air to remove stubborn dust, if needed.
- Coat all parts with a thin coat of household oil to prevent a buildup of rust.
- Store each router bit inside the bit case.
Feedback and Help
We would love to hear your feedback. To ensure we are providing the best customer please consider writing a customer review.
Scan QR Code below with your phone camera or QR reader
US
UK: amazon.co.uk/review/review-your-purchases#
If you need help with your Denali product, please use the website or number below.
US: amazon.com/gp/help/customer/contact-us
UK: amazon.co.uk/gp/help/customer/contact-us
+1 877-485-0385 (US Phone Number)
Documents / Resources
 |
DENALI B09HSSS4RP Shank Round Nose Core Box Router Bit Set [pdf] Instruction Manual B09HSSS4RP Shank Round Nose Core Box Router Bit Set, B09HSSS4RP, Shank Round Nose Core Box Router Bit Set, Round Nose Core Box Router Bit Set, Nose Core Box Router Bit Set, Core Box Router Bit Set, Box Router Bit Set, Router Bit Set, Bit Set, Set |
