DELTACO S33 Camera Detector

Specifications
- Product Name: Camera Detector
- Product Model: S33
- Dimensions: 90mm x 60mm (Approximate, based on image)
- Charging: DC5V
- Interface: Type-C (Supports reversible insertion, EU standards compliant)
- Working Voltage: 3.7V
- Alarm Mode: Audio-visual
- Control Mode: Button type
- Camera Detection: Infrared reflection detection
- Piezoelectric Ceramic Body Alarm Decibel: 120dB
- Access Control Mode: Vibration alarm
- Additional Features: Flashlight mode
- Power: 1W
- Product Material: ABS, PCB
Product Overview

Usage Instructions
Power On/Off:
Press and hold the function button (labeled ‘1’ in the diagram) for one second to turn on the device.
Mode Selection:
Once powered on, press the function button repeatedly to cycle through the following modes:
- 1st gear: Constant light mode (for continuous detection)
- 2nd gear: Detection mode (specific detection function)
- 3rd gear: Anti-theft mode (vibration alarm)
- 4th gear: Night light mode (flashlight function)
- 5th gear: Shutdown mode (turns off the device)
Charging:
Connect the device to a DC5V power source using the provided Type-C charging interface. The Type-C interface supports reversible insertion.
Camera Detection:
Utilize the camera detection window and detection lamp (infrared spotlight) for infrared reflection detection of hidden cameras.
Flashlight Function:
Activate the 4th gear (Night light mode) to use the high brightness white light flashlight.
Certificate of Conformity

Troubleshooting
- Device not turning on: Ensure the device is charged. Connect it to a power source using the Type-C cable.
- Detection not working: Make sure you are in the correct detection mode (1st or 2nd gear). Ensure the detection window is clear and unobstructed.
- Alarm not sounding: Check if the device is in anti-theft mode (3rd gear) for vibration alarm. Verify the battery level.
- Charging issues: Try a different Type-C cable or power adapter. Ensure the cable is fully inserted into the charging interface.
Documents / Resources
![]() | S33 Camera Detector |
References
- User Manualmanual.tools
Published: June 24, 2026
Updated: June 25, 2026

