User Manual
Wreless Mouse
Where is USB?

Take out the USB from the back of the mouse. The mouse share one USB.
How to set up

Step 1: Please put the USB receiver into your computer.
Step 2: then turn on the mouse.
Note: The mouse will automatically connect to the computer, no driver needed.
What to do if the mouse loses connection with USB?
Press and hold the left, middle, and right buttons of the mouse for 3-5 seconds, then plug the USB into the computer.
The Functions of a Mouse

Product specifications and parameters
Mouse:
| Lenght: | 123.4 mm |
| Width: | 63.0 mm |
| Height: | 43.0 mm |
| Weight: | 84±0.5 g |
| Voltage: | 5V |
FAQ
Ql: What should I do if the mouse cannot be charged? Al:
- Please check whether the charging port is connected. If disconnected, reconnect it.
- Try to replace the charging cable with a known working one.
- Try to change the USB port. if the problem persists, please contact us.
Q2: What should I do if the backlight stops working? A2:
- Please charge for half an hour and then re-insert the USB receiver.
- Please try to restart the mouse.
Customer service
Buying SABLUTE, You Will get:
30-Day Money-Back Guarantee
90-Day Free Replacement
Hassle-Free Warranty Without Returning
Lifetime Customer Support
Contact us
For FAQs and more information, please visit:
Phone: 1-888-858-1618 (US), Mon-Fri, 9am-6pm (Worktime), 1pm-2pm (Rest)
sablute.com/pages/contact
sabluteservices@outlook.com
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
After-Sales
Email:sabluteservices@outlook.com
Website URL: sablute.com
MS710
system support: winll/win10/win8/win7/mac/las/ Android/windows xp…
Documents / Resources
![]() | MS710 Wireless Mouse |
References
- User Manualmanual.tools
