DELTA INT-KLCDR-BL Keypad For Alarm Control Panel User Manual
DELTA INT-KLCDR-BL Keypad For Alarm Control Panel

Warning!
Please read the user manual included in this work as it contains important information related with safety of installation and use of the device.

Only persons who read the user manual may use the device.

The user manual must be kept because it may be required in the future. The device is to be used exclusively for purposes specified in this user manual.

The device must be unpacked prior to starting-up. After removing the packaging make sure the device is in working order.

If the product has defects, it should not be used until it is repaired.

The product is intended for use at home and commercial use and may not be used for other than intended use.

The manufacturer is not liable for damages resulting from not adhering to the rules contained in the user manual, therefore, we recommend to follow the aforementioned safety rules for operation and maintenance of the device. In this way you will ensure yourself safety and avoid causing damage to the device.

The manufacturer and the supplier are not liable for losses or damages arising out of the product, including financial or intangible losses, loss of profits, income, data, pleasure from use of the product or other products related with it – indirect, incidental or consequential loss or damage. The above provisions apply whether the loss or damage concerns:

  • Deterioration of quality or the lack of operation of the products or products related with it due to damage as well as the lack of access to the product when it is undergoing repair, which results in stoppage the loss of user’s time or a break in business activity;
  • Improper results of operation of the product or products related with it;
  • It applies to losses and damages according to any legal category, including negligence and other losses, termination of a contract, expressed or implied guarantee and strict liability (even if the manufacturer or the supplier was notified about the possibility of occurrence of such damages).

Safety measures:

Particular attention at designing was directed to quality standards of the device where ensuring safety of operation is the most important factor.
The device must be secured against contact with caustic, staining and viscous fluids.

The device was designed in such a way that it restarts operation when power supply is restored after a break.
Attention! We recommend using protections to further protect the device from possible overvoltage’s in installations.
Surge protectors are effective protection against accidental pass to the device voltages higher than the rated. Damages caused by pass the voltages higher than specified in manual, are not under warranty.
Turn off the device before transporting it.
Prior to connecting the device to a power source check whether the supplied voltage is consistent with rated voltage specified in the user manual.

Proper product disposal:

A marking of a crossed out waste bin indicates that the product may not be disposed together with other household waste in the entire EU. To avoid possible damage to the natural environment of health due to uncontrolled waste disposal, therefore, it should be handed over for recycling, propagating in this way sustainable use of natural resources.
To return a worn-out product, use a collection and disposal system of this type of equipment or contact a seller from whom it was purchased. He will then be recycled in an environmentally-friendly way

The INT-KLCDR-BL keypad is intended for daily operations and programming the Integra series alarm control system.
The built-in proximity card reader allows to operate the system without the necessity to remember passwords. With the LCD display showing text messages, even advanced functionalities of the alarm control unit are simple and convenient.

Support: INTEGRA
Main features:
  • proximity reader built-in,
  • Large, easily readable LCD with backlight displaying detailed information on system state,
  • Optical and acoustic alarm system status signaling,
  • Blue backlight of the keys,
  • Alarms: keypad hold-down PANIC, FIRE and AUX,
  • Buzzer for acoustic signaling of some system events,
  • RS-232 port allows to programming using the PC with GUARDX software installed,
  • Micro switch as tamper contact
Power supply: 12 V DC
Current consumption: max. 156 mA
Color: White
Operation temp: -10 °C … 55 °C
Weight: 0.235 kg
Dimensions: 140 x 126 x 26 mm
Manufacturer / Brand: SATEL
Guarantee: 2 years

Front view
Front view
View after open the cover
View after open cover
Internal view
Internal view
Mounting side view
Mounting side view
In the kit
In kit

PACKAGE

Dimensions (L x W x H): 0x0x0 mm
Gross Weight: 0 kg

DELTA-OPTI Monika Matysiak; https://www.delta.poznan.pl
POL; 60-713 Poznań; Graniczna 10
e-mail: delta-opti@delta.poznan.pl;
tel: +(48) 61 864 69 60
DELTA logo

Documents / Resources

DELTA INT-KLCDR-BL Keypad For Alarm Control Panel [pdf] User Manual
INT-KLCDR-BL, INT-KLCDR-BL Keypad For Alarm Control Panel, Keypad For Alarm Control Panel, Alarm Control Panel, Control Panel, Panel

References

Leave a comment

Your email address will not be published. Required fields are marked *