DEKCO DC5E Security Camera Instruction Manual

DEKCO DC5E Security Camera

Night vision function

• Step 1: Click on camera settings, select “Image settings”;
• Step 2: Select “Night Vision Mode”, click to enter to set the night vision mode; the automatic mode is preferred, and the night vision mode can be automatically switched according to the environment.

Automatic tracking function

• Step 1: Click on camera settings, select “Image settings”;
• Step 2: Turn on “Human Motion Tracking”; turn on “Receive Alert Notifications” at the same time; in this way, after detecting a moving human, the camera automatically tracks the moving person; at the same time, the detected information is sent to your on the phone.

Sound and light alarm function

• Step 1: Click on camera settings, select “Image settings”;
• Step 2: Click “Alarm Management”; select “Motion Detection”.on this setting page; you can set the sensitivity, alarm interval, and alarm area.
• Step 3: Select “Audio warning and strobe light”; open “Audio warning and strobe light”. On this page, you can choose three types of alarms: Audio warning, White Light warning, Audiowarning and strobe light.

SD card format

• Step 1: Click on camera settings, select “Image settings”;
• Step 2: Click “Recording Management”, on this page, you can set the Full-Day recording mode and event recording mode; at the same time, you can format the SD card.