TaoTronics TT-BR05 Wireless Receiver
User Guide
Product Diagram
- ① Power Button / LED Indicator: Controls power, pairing, and indicates status.
- ② Volume + / Next Track: Increases volume or skips to the next track.
- ③ Volume - / Previous Track: Decreases volume or skips to the previous track.
- ④ Microphone: For hands-free calls.
- ⑤ Micro USB Charging Port: For charging the device.
- ⑥ 3.5mm Audio Output Port: Connects to audio devices.
Package Contents
- 1x TaoTronics TT-BR05 Wireless Receiver
- 1x USB Charging Cable
- 1x 3.5mm Audio Cable
- 1x 3.5mm Audio Adapter
- 1 x User Guide
How to Use
1. Charging
- Connect the charging port (⑤) to any USB charging adapter or active computer USB port.
- Charging begins automatically, indicated by a green LED indicator.
- The receiver is fully charged when the LED indicator turns off.
Note: Charge the receiver at least once every 6 months if not in use for extended periods.
2. Pairing
- Ensure the receiver and your Bluetooth device are within 3 feet (1 meter) of each other.
- For first-time use, press and hold the Power Button (①) until the LED indicator flashes red and blue alternately to enter pairing mode.
- Activate Bluetooth® on your phone and search for nearby Bluetooth connections.
- Select "TaoTronics TT-BR05" from the search results to connect. The LED indicator will flash blue once connected.
Note: The Bluetooth® receiver remembers previously paired devices.
Button Controls
Function | Operation |
---|---|
Power on / off | Press and hold the Power Button (①) until the LED Indicator flashes or turns off. |
Play / Pause / Answer / Hang up phone call | Press the Power Button (①) once. |
Reject phone calls | Press and hold the Power Button (①) for 2 seconds. |
Redial | Press the Power Button (①) twice. |
Volume +/- | Press and hold the Volume +/- Button (② or ③). |
Previous / Next Track | Press the Volume +/- Button (② or ③) once. |
FCC Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
WEEE Compliance
Correct Disposal of This Product (Waste Electrical & Electronic Equipment). This marking indicates that the product and its electronic accessories should not be disposed of with other household waste. Please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.