VANTAGE VUE ®
QUICK SETUP GUIDE
403 Vantage Vue Weather Station
Prepare the Sensor Suite: attach wind cups and wind vane; pull tab on battery (or install battery if not included); install debris screen and rain collector tipping spoon assembly.
Download the Weather Link app.
If using Weather Link Live, power it up and use the Weather Link app to set it up.
If using Weather Link Console, power it up and follow the on-screen prompts to set it up.
Verify data transmission from the Sensor Suite to the Weather Link app or to the Console.
Note: For best reception during this step, Weather Link Live and/or Console and the Sensor Suite should be at least 10 feet (3 meters) apart.
(Initial reception typically takes 10 minutes depending on specific 1-3 minutes but can take up to environmental conditions.)
Mount the Sensor Suite to its outside mounting pole.
Please refer to your manuals for detailed instructions.
Manuals can be downloaded at www.davisinstruments.com/vv-manual.
For Sales & Service Contact
o3s3(0)61 603742
info@hhsolutions.ie
www.hhsolutionsje
Copyright ©2023 Davis Instruments Corp. All rights reserved.07395.405 Rev. A 2/9/2023
Documents / Resources
 |
DAVIS 403 Vantage Vue Weather Station [pdf] Instruction Manual 403 Vantage Vue Weather Station, 403, Vantage Vue Weather Station, Weather Station, Station |