Contents
hide
DAVINCI Lisa Security Alarm Control Panel
Product Information
Technical Specifications
- Type: Alarm Control Panel
- Power supply: 12V DC
Product Usage Instructions
Installation Guide
- Remove the Easy-fix mounting support back part.
- Connect the Ethernet cable to a router or internet outlet for initial configuration.
- Connect the power to the Control Unit using the provided power supply.
- Connect the battery through the appropriate connector or use a 12V DC source through the supplied terminal block.
- Fix the support to the wall using the supplied screws and attach the control unit.
Control Panel Configuration via App D’AVINCI
- Download and install the D’AVINCI application on your smartphone (iOS/Android).
- Run the app and add Lisa Control Panel.
- Scan the QR code present on the Control Panel and insert a name (e.g., Office, Home) for identification.
- Add rooms and proceed with parameter configuration as needed.
Signal Management
The LED indicators on the Control Panel provide information about system status and events. Refer to the user manual for detailed LED indications.
Installation Guide
- Remove the Easy-fix mounting support back part.
- Connect the power to the Control Unit using the power supplied.
- Connect the battery through the appropriate connector. Alternatively, you can power the Central using a 12 V DC source through the supplied terminal block.
- Connect the Ethernet cable to a router or internet outlet. The initial configuration of the operating parameters requires the use of an Ethernet connection with Internet access.
- Fix the support to the wall using the supplied screws. Fix the control unit on the support and tighten the locking screws.
Control panel configuration via App D’AVINCI
- Run the app and add Lisa Control Panel.
- Scan the QR code present on the Control Panel, Insert the name of Control Panel (e.g., Office, Home, etc).
- Verify that the device is been added correctly.
- Subsequently, add rooms and proceed with the parameter configuration.
- In case of the addition of additional devices to the control panel, follow the guide to the device to be associated.
Signal Management
- The LED of the Control Panel characterizes the state of the system or the events that occur.
- The D’AVINCI logo on the front from the Central can light up in red, white, and green depending on the control panel status.
| INDICATION | EVENT |
| The three D’AVINCI logo LEDs lit in fixed mode in the sequence green – white – red | Regular state and implant not armed |
| The full D’AVINCI logo in fixed red mode | System status armed |
| The full D’AVINCI logo in fixed blue mode | System status armed in Stay mode |
| LED left green off | Control unit not connected to the D’AVINCI Cloud |
| Flashing green LED on the left | Central connection to the D’AVINCI Cloud |
| LED and on the left green on in steady mode | Regular connection to the D’AVINCI Cloud |
| White LED(in central position) flashing | LTE module fault(Sim not inserted, network search) |
| White LED(in central position) in fixed mode | Regular cellular connection (regular LTE module) |
| Yellow LED(in central position) in fixed mode | Connection to the Cloud through the Carrier backup, LTE module |
| A flashing red LED on the right | Radio fault associated devices |
| The red LED on the right is in fixed mode | Regular status of associated devices |
| Green LED when the control unit is turned on | The control unit looks for the connection with the cloud, and after that, all three tricolour LEDs light up |
| Short flashing, every three seconds, of the green, white and red led | System disarmed with AC loss |
| Short flashing, every three seconds, of all the red LEDS | System armed with AC loss |
| Short flashing, every three seconds, of all the blue LEDS | System armed in Stay mode with AC loss |
Technical specifications
| Type | Wireless central unit 868 Mhz; WiFi
+Ethernet module and 4G LTE communicator |
| Power supply | 230 V AC / 12 V DC
Built-in backup battery: Li-Ion 3000 m h |
| Radio range | Up to 2000 meters in open space |
| Manageable wireless devices | Up to 200 |
| Sirens | Max 6 |
| Users allowed | Max 200 |
| Rooms | Max 30 |
| Repeaters | Max 5 |
| Encryption | Proprietary protocol based on AES |
| Anti-sabotage protection | – Antijammer
– Anti-tampering (anti-tear) and anti-opening tamper |
| Radio communication protocol | GENIO |
| Operating frequencies | 868.20 Mhz, 868.95 Mhz |
| Communication channels | Ethernet; WiFI(802.11b/g/n); 4G LTE; 2G Voce |
| Sim card supported | Micro SIM |
| Installation | Indoor |
| Protection class | IP40 |
| Operating temperatures | From -10° a +40° |
| Maximum allowable humidity | Up to 75% |
| Dimensions | 170X165X50 |
| Weight | 150 grams |
- 10.D01 – Quick guide Lisa LAN/4G/WiFi
- D1.001 – Alarm control panel LAN/4G/WiFi
- Install the D’AVINCI application on your smartphone (iOS / Android). As soon as you start the App, follow the procedure to register your account (email entry, number telephone) and wait for the request from the Cloud D’AVINCI.
- Connect to your e-mail and validate the registration using the code you received. Access the app to verify that the transaction has been successful.
FAQ
- Q: How many wireless devices can be managed by the Allarm Control Panel?
- A: The alarm control Panel can manage multiple wireless devices. For specific details, refer to the user manual or technical specifications.
- Q: What do different LED colors on the Control Panel indicate?
- A: The LED colors indicate various system statuses and events.
- Refer to the user manual for a detailed explanation of LED indications and their meanings.
Documents / Resources
 |
DAVINCI Lisa Security Alarm Control Panel [pdf] Installation Guide Lisa Security Alarm Control Panel, Lisa, Security Alarm Control Panel, Alarm Control Panel, Control Panel |