Data Sync Engineering
P.O. Box 539, 2 Footbridge Lane
Blairstown, New Jersey 07825
www.cdadapter.com
SMP-III Dot Matrix Printer
Brand New, in sealed package. This is a direct OEM Replacement Printer.
Previously used in the Midmark Sterilizer M9-M11 020 Series printer.
Easy to install, just two connectors and four screws, as shown below.
Documents / Resources
 | SMP-III Dot Matrix Printer |
References
- CD Changer Interfaces and Conversion Kits for Jukeboxes and Wallboxeswww.cdadapter.com
- User Manualmanual.tools
Published: October 27, 2023
PRINTER WILL ONLY PRINT ON ONE SIDE OF THE PAPER AND IS NOT FEEDING THE PAPER FAST ENOUGH. TOOK OUT A PAPER JAM AND STILL THE SAME. CAN WE ORDER THE SMP-III PART?
How do I fix paper feed issues on the SMP-III printer, and where can I order a replacement part?
The SMP-III is a direct OEM replacement printer often used in Midmark Sterilizer M9-M11 020 Series units. If the printer is failing to feed paper correctly or printing incorrectly after a jam, the internal mechanism may be damaged.
Ordering Parts:
You can contact Data Sync Engineering (cdadapter.com) regarding availability. Based on their official contact information:
Replacement Instructions:
If you obtain a replacement SMP-III module, installation involves:
Note: The manufacturer has reported supply chain shortages for semiconductor components, so it is recommended to email for current lead times before placing an order.
Read the full Q&A page