Danfoss Logo

Danfoss R404A Optyma Plus Inverter AC Drives and Controls - LogoR404A/R507 • R134a • R407C
OPTYMA PLUS™
– the low noise solution designed by Danfoss

Danfoss R404A Optyma Plus Inverter AC Drives and Controls

R404A Optyma Plus Inverter AC Drives and Controls

REFRIGERATION & AIR CONDITIONING DIVISION

OPTYMA PLUS™ – the low noise condensing units for quick installation

Danfoss R404A Optyma Plus Inverter AC Drives and Controls - condensing

In designing our new OPTYMA PLUS range we listened to our customers, utilised all our engineering skills and combined the very best design knowledge to create a fully factorybuilt condensing unit ready for quick installation and quiet operation.
OPTYMA PLUS is a unique integral Danfoss condensing unit built around Danfoss components.
As standard we supply the compressor, fan speed control, Flter drier, shut of valve, pressure switch, magnetic contactor, sight glass and electrical fuse all within a robust weather proof housing. A perfect cooling solution for typical food retail, petrol forecourt sites and cold room and freezer applications.
All units are fully wired and factory tested. Installation is efiortlessly simple: just mount the unit, switch on the power, and the cooling process is up and running.  OPTYMA PLUS can be located anywhere. Acoustic insulation and fan speed reduction during low capacity operation periods makes the operation of OPTYMA PLUS so smooth and quiet that it will not disturb the peace in your local environment.

Installer benefits
+ An integrated Danfoss design
+ Easy maintenance: just remove the panels and you have easy access to the components
+ Outstanding performance even in the toughest applications
+ A minimum size footprint enabling installation in small spaces without compromising the units’ performance or service accessibility
+ Common Danfoss components all stocked locally by wholesalers

End-user benefits
+ Low noise operation
+ Modern practical design with a neutral colour to fit in with its surroundings
+ Strong weather resistant housing with lasting durability even in the harshest environments
+ Reliable high ambient operation and proven reliability in the most demanding applications
+ Energy saving benefits with fan speed control and selection of energy efficient components
Product advantages
+ Energy efficient
+ Low energy consumption
+ Fully weatherproof housing made from epoxy powder coated steel
+ Electrical box: IP54
+ Extremely low noise level
+ Small dimensions

Danfoss R404A Optyma Plus Inverter AC Drives and Controls - Ball valves 1

OPTYMA PLUS™ condensing unit R404A/R507 LBP/MBP

Danfoss R404A Optyma Plus Inverter AC Drives and Controls - condensing R404A

Conditions according to EN 13215
Refrigeration capacity data based on suction gas superheat = 10 K
Underlined values: Restrict suction gas superheat to max. 30 K
Bold values: Restrict suction gas superheat to max. 20 K *) Pressure Level: [dB(A)] at 10 m **) H = Height / D = Depth / L = Length
Temperature of the refrigerant at condenser outlet is subcooled within the limits of the condensing unit.
Data may vary in some cases for three phase units in comparison to one phase version.
All specifications are subjected to change by manufacturer without prior notice.

OPTYMA PLUS™ condensing unit R134a MBP

Danfoss R404A Optyma Plus Inverter AC Drives and Controls - condensing unit

Conditions according to EN 13215:
Refrigerating capacity data based on suction gas superheat = 10K
Temperature of the refrigerant at condenser outlet is subcooled within the limits of the condensing unit.
Data may vary in some cases for three phase units in comparison to one phase version.
All specifications are subjected to change by manufacturer without prior notice.

Adjustments to be done by using R134a instead of R404A:
The high pressure setting for the KP17WB has to be reduced to 18 Bar.
The setting for the RGE (Fan speed controller) has to be reduced to 11 Bar.
Final adjustment and flne tuning has to made at the location where the unit is installed.

Designation OP- Code No. Receiver Vol. [l] Suction Line ∅ [inch] Liquid Line ∅ [inch]
LPHC048NTP00 114X3224 4.2 5⁄8 3⁄8
LPHC048NTP00 114X3232 4.2 5⁄8 3⁄8
LPHC068NTP00 114X3240 4.2 5⁄8 3⁄8
LPHC068NTP00 114X3248 4.2 5⁄8 3⁄8
LPHC096NTP00 114X3356 7.1 7⁄8 3⁄8
LPHC136NTP00 114X3364 7.1 1 1⁄8 ½
MPZC030MTP00 114X4216 4.2 5⁄8 3⁄8
MPZC030MTP00 114X4224 4.2 5⁄8 3⁄8
MPZC048MTP00 114X4232 4.2 5⁄8 3⁄8
MPZC048MTP00 114X4240 4.2 5⁄8 3⁄8
MPZC060MTP00 114X4248 4.2 ¾ 3⁄8
MPZC060MTP00 114X4256 4.2 ¾ 3⁄8
MPZC086MTP00 114X4364 7.1 7⁄8 5⁄8
MPZC108MTP00 114X4372 7.1 7⁄8 5⁄8
MPZC136MTP00 114X4380 7.1 1 1⁄8 5⁄8

OPTYMA PLUS™ condensing unit R407C MBP

Danfoss R404A Optyma Plus Inverter AC Drives and Controls - condensing unit R407C MBP

Conditions according to EN 13215:
Refrigerating capacity data based on suction gas superheat = 10 K
Restrict suction gas superheat to max. 15 K
The shown data are preliminary.

Temperature of the refrigerant at condenser outlet is subcooled within the limits of the condensing unit.
Data may vary in some cases for three phase units in comparison to one phase version.
All specifications are subjected to change by manufacturer without prior notice.

Danfoss R404A Optyma Plus Inverter AC Drives and Controls - ApplicationsApplications
This new condensing unit range will perfectly fit applications like:

  • Cold stores and freezer rooms
  • Beer and wine cellars
  • Small food retail and mini markets
  • Garage forecourt shops

OPTYMA PLUS™ includes also the following 7 Danfoss products:

Danfoss R404A Optyma Plus Inverter AC Drives and Controls - Compressor Danfoss R404A Optyma Plus Inverter AC Drives and Controls - Pressure control Danfoss R404A Optyma Plus Inverter AC Drives and Controls - moisture indicator Danfoss R404A Optyma Plus Inverter AC Drives and Controls - drier Danfoss R404A Optyma Plus Inverter AC Drives and Controls - Contactors Danfoss R404A Optyma Plus Inverter AC Drives and Controls - Ball valves Danfoss R404A Optyma Plus Inverter AC Drives and Controls - Fan speed
Compressor Pressure control Sight glass with
moisture indicator
Hermetic filter drier with solid core Contactors Ball valves Fan speed control

Danfoss R404A Optyma Plus Inverter AC Drives and Controls - Fan speed 1 For more detailed information please use our software RS+™3

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products on order provided that such allterations can be made without subsequential changes being necessary in specifications already agreed. already
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

Danfoss LogoDEHC.PB.800.D4.02/520N0397
compressors.danfoss.com
Produced by Danfoss A/S, RA Marketing

Documents / Resources

Danfoss R404A Optyma Plus Inverter AC Drives and Controls [pdf] Owner's Manual
R404A, R404A Optyma Plus Inverter AC Drives and Controls, Optyma Plus Inverter AC Drives and Controls, Inverter AC Drives and Controls, AC Drives and Controls, Drives and Controls

References

Leave a comment

Your email address will not be published. Required fields are marked *