Danfoss Optyma kontroll AK-RC Single Phase Mounting Ki
Product Specifications
- Product Name: OptymaTM control AK-RC Single Phase mounting kit
- Model Numbers: Danfoss 80G8242, Danfoss 80G8240, Danfoss 80G8241, Danfoss 80G8243, Danfoss 80G8282
Product Usage Instructions
- Identify components A and B from the kit.
- Attach component A to component B using the provided screws (x3).
- Refer to the installation guide for proper placement and orientation.
- Use the following steps to install the OptymaTM control AK-RC Single Phase mounting kit:
- Ensure the area of installation is suitable for the dimensions of the kit.
- Securely mount the assembled kit to the designated location.
- Connect any required cables or components as per the installation guide.
Note for Printing
- When printing any related documentation, ensure your printer is set to ACTUAL SIZE for accurate representation of dimensions.
Mounting Kit Assembly
Dimension
Note: Make sure your printer is set to ACTUAL SIZE when printing.
More Information
FAQ
- Q: What are the model numbers included in the OptymaTM control AK-RC Single Phase mounting kit?
- A: The kit includes the following model numbers: Danfoss 80G8242, Danfoss 80G8240, Danfoss 80G8241, Danfoss 80G8243, and Danfoss 80G8282.
- Q: How should I ensure proper assembly of the mounting kit components?
- A: Refer to the provided installation guide for step-by-step instructions on assembling the components A and B using the provided screws.
Documents / Resources
 |
Danfoss Optyma kontroll AK-RC Single Phase Mounting Ki [pdf] Installation Guide Optyma kontroll AK-RC Single Phase Mounting Ki, Optyma kontroll AK-RC, Single Phase Mounting Ki, Mounting Ki, Ki |