Danfoss-LOGO

Danfoss KP 61 Thermostat Pressure switch

Danfoss-KP-61-Thermostat-Pressure-switch-PRODUCT

Specifications:

  • Model: KP 61, KP 62, KP 63, KP 68, KP 69
  • Charge Type: Vapour charge, Adsorption charge
  • Protection Rating: Drip proof IP30 (EN 60529)
  • Electrical Ratings:
    • AC 1: 16A
    • LR 112A
    • AC 3: 16A
    • AC 15: 10 A
  • Voltage: 400V when used according to UL regulations
  • Refrigeration Controller: Listed refrigeration controller 61B5

Product Usage Instructions

Installation:

  1. Disconnect power supply before starting installation.
  2. Use copper wire only for wiring connections.
  3. Follow the specified tightening torque of 20 lb.in for secure connections.

Electrical Connection:

  1. Ensure power supply is disconnected before making any wiring connections.
  2. Do not touch live parts with bare fingers or tools to avoid electrical shock.

Manual Trip Function:
For models KP 61, KP 71, KP 73 with manual trip function, refer to the corresponding part numbers for additional information on installation and usage.

KP 61, KP 62, KP 63, KP 68, KP 69 vapour charge
KP 62, KP 71, KP 73, KP 75, KP 77, KP 78, KP 79, KP 81, KP 85 adsorption charge (cross ambient)

Installation guide

Danfoss-KP-61-Thermostat-Pressure-switch-FIG- (1) Danfoss-KP-61-Thermostat-Pressure-switch-FIG- (2)

Danfoss-KP-61-Thermostat-Pressure-switch-FIG- (3)

Danfoss-KP-61-Thermostat-Pressure-switch-FIG- (4)

Danfoss-KP-61-Thermostat-Pressure-switch-FIG- (5)

Electrical rating – General

Danfoss-KP-61-Thermostat-Pressure-switch-FIG- (13)

When used acc. to UL regulations

Danfoss-KP-61-Thermostat-Pressure-switch-FIG- (6)

not applying for KP 85

CAUTION:
Disconnect power supply before wiring connections are made or service to avoid possible electrical shock or damage to equipment.
Do never touch live parts with your fingers or with any tool.

Manual trip function

Danfoss-KP-61-Thermostat-Pressure-switch-FIG- (7)

Danfoss-KP-61-Thermostat-Pressure-switch-FIG- (14)

Danfoss-KP-61-Thermostat-Pressure-switch-FIG- (8)

Danfoss-KP-61-Thermostat-Pressure-switch-FIG- (10)

Danfoss-KP-61-Thermostat-Pressure-switch-FIG- (15)

Danfoss-KP-61-Thermostat-Pressure-switch-FIG- (11)

Vapour chargeDanfoss-KP-61-Thermostat-Pressure-switch-FIG- (9)

Danfoss-KP-61-Thermostat-Pressure-switch-FIG- (12)

Frequently Asked Questions (FAQ):

Q: What is the protection rating of the product?
A: The protection rating is Drip proof IP30 (EN 60529).

Q: Can I use any type of wire for electrical connections?
A: No, only copper wire should be used for wiring connections.

Q: How should I handle the manual trip function?
A: Follow the specific instructions provided for models KP 61, KP 71, KP 73 with manual trip function.

Documents / Resources

Danfoss KP 61 Thermostat Pressure switch [pdf] Installation Guide
KP 61, KP 62, KP 63, KP 68, KP 69, KP 71, KP 73, KP 75, KP 77, KP 78, KP 79, KP 81, KP 85, KP 61 Thermostat Pressure switch, KP 61, Thermostat Pressure switch, Pressure switch, switch

References

Leave a comment

Your email address will not be published. Required fields are marked *