Danfoss DHS-SMDT Heat Recovery Mmodule
Installation Instruction
Overview
This document provides instructions for the installation and use of the ESM-11 system. Follow the steps carefully to ensure proper setup and operation.
Installation Steps
- Prepare the mounting surface and ensure it is clean and dry.
- Attach the first component to the surface using the provided adhesive strip. Ensure it is aligned correctly.
- Secure the component with the provided strap, wrapping it tightly around the surface.
- Use the provided cutting tool to trim any excess strap material.
- Repeat the process for additional components as needed.
Specifications
| Model | ESM-11 |
|---|---|
| Manufacturer | Danfoss |
| Document Code | DHS-SMDT/DK |
| Revision Date | 12/2020 |
Safety Precautions
- Ensure all components are securely fastened before use.
- Do not use damaged or defective parts.
- Follow all local safety regulations during installation.
Contact Information
For further assistance, please contact Danfoss customer support.
FAQs
- What is the ESM-11 used for?
The ESM-11 is used for secure mounting in various applications. - Can I install the ESM-11 myself?
Yes, the ESM-11 is designed for easy installation. Follow the instructions provided. - What should I do if a component is missing?
Contact Danfoss customer support for assistance with missing parts.
Documents / Resources
 |
Danfoss DHS-SMDT Heat Recovery Mmodule [pdf] Installation Guide DHS-SMDT, DK, DHS-SMDT Heat Recovery Mmodule, DHS-SMDT, Heat Recovery Mmodule, Recovery Mmodule |