Technical Support Setup Procedure
How do I set up and install my E15 range extender via Eagle
AI Pro App
Eagle Pro AI App
Set up using Android OS / iPhone iOS
- Search and install the free EAGLE PRO AI available on the App Store or on Google Play.
- Launch the EAGLE PRO AI from the home screen of your device. Create an account, then tap Sign Up with Email.
- Tap Install New Device. Scan the Setup code on the bottom of the extender. Follow the on-screen instructions to complete the setup.
- Make sure you are connected to your home network, which you would like to extend, tap Next
(Note: This unit supports two different modes, Wireless Extender and Access Point. Select Wireless, then tap Select)
- Place your Extender between your router and where you want to extend the signal too, then tap Next
- When the status LED turns blinking orange, tap Next
- Select the Wi-Fi network you are trying to Extend (Ex. Home Network), then tap Next
- Enter in the Wi-Fi password of the network you are extending (Ex. Home Network), then tap Next
- Enter a name (SSID) and password for identifying and encrypting your extended network.
- Create an admin/device password, then tap NEXT.
Note: It is strongly recommended that you change the default device password for accessing the extender’s configuration page.
- Give the device a name, for voice commands with Alexa or Google Assistant, then tap Next
- The app will add your device to your D-Link Account and restart. Tap Finish
Set up is complete. You can click on Device to manage your settings!
Documents / Resources
 |
D-Link Eagle Pro AI App [pdf] User Guide Eagle Pro AI, App, Eagle Pro AI App |
