D and R Airlab-DT EQ RIAA Pre Amp on your Airlab DT EQ Module Installation Guide

Airlab-DT EQ RIAA Pre Amp on your Airlab DT EQ Module

“

Product Information

Specifications:

• Product: RIAA Pre-Amp for Airlab-DT EQ Module
• Compatibility: Airlab-DT EQ Module
• Function: Pre-amplification for LINE B input

Product Usage Instructions

Installation:

1. Remove the screw cover strips on top and bottom of the
   module.
2. Remove all screws from the Triple EQ module where you want to
   include the RIAA pre-amp option.
3. Lift the module carefully.
4. Remove the module from the console and place it on a soft
   surface.
5. Remove the jumpers on the printed board where the RIAA option
   will be placed.
6. Connect the purchased RIAA pre-amp option to the printed board,
   ensuring correct alignment over the male and female headers.
7. Carefully place the module back inside the console.

Testing:

Before mounting all front panels again, make sure to test the
pre-amp option on LINE B to ensure proper functionality.

Good luck!

FAQ

Q: Can I install multiple RIAA pre-amps on one Airlab-DT EQ
Module?

A: The Airlab-DT EQ Module is designed to accommodate one RIAA
pre-amp option per module.

“`

Installation instructions to install an RIAA pre-amp on your Airlab-DT EQ module. Instructions:
1. Remove the screw cover strips on top and bottom of the module. 2. Remove all screws from the Tripe EQ module where you want to include a RIAA pre-amp
option. 3. Lift the module. 4. Remove the module carefully out of the console and lay down on a soft layer on top of the
console. 5. Remove the jumpers on the printed board where you need to place the RIAA option.
6. Connect your purchased RIAA pre-amp option on the printed board. Be careful that you place the RIAA correctly over the male and female headers.

. 7. Now place the module carefully inside the console.
On this moment the module is ready for pre-amp option on “LINE B” on your module. 8. Test everything before you mount all front panels again.
Good luck!

Documents / Resources

D and R Airlab-DT EQ RIAA Pre Amp on your Airlab DT EQ Module [pdf] Installation Guide Airlab-DT EQ RIAA Pre Amp on your Airlab DT EQ Module, Airlab-DT EQ, RIAA Pre Amp on your Airlab DT EQ Module, Amp on your Airlab DT EQ Module, Airlab DT EQ Module, DT EQ Module, EQ Module, Module

References

• User Manual