S10 Bluetooth Speaker
Product Information
Specifications:
- Model: XYZ-1000
- Dimensions: 10in x 5in x 3in
- Weight: 2lbs
- Power Source: AC adapter
- Material: Plastic
Product Usage Instructions:
1. Powering On/Off:
To power on the device, plug in the AC adapter to a power source
and press the power button. To power off, press and hold the power
button until the device shuts down.
2. Setting Up:
Place the device on a flat surface and ensure proper ventilation
around it. Connect any necessary cables according to the user
manual.
3. Operation:
Follow the menu prompts on the device’s screen to navigate
through different functions. Use the control buttons to make
selections and adjustments.
4. Maintenance:
Regularly clean the device with a soft, dry cloth. Avoid using
harsh chemicals or solvents that may damage the plastic casing.
FAQs (Frequently Asked Questions)
Q: How do I reset the device to factory settings?
A: To reset the device, navigate to the settings menu and select
the option for factory reset. Confirm the action, and the device
will revert to its original settings.
Q: Can I use the device without the AC adapter?
A: No, the device requires the AC adapter for power. It is not
designed to operate on battery power alone.
Q: What should I do if the device freezes during
operation?
A: In case of a freeze, try resetting the device by pressing the
reset button located on the back panel. If the issue persists,
contact customer support for further assistance.
FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Documents / Resources
 |
CYBROS S10 Bluetooth Speaker [pdf] Instruction Manual 2A9F6-S10, 2A9F6S10, S10 Bluetooth Speaker, S10 Speaker, Bluetooth Speaker, Speaker, S10 |