CyberView

CyberView F1417 1U Ultra Short Depth LCD Console Drawer

CyberView-F1417-1U-Ultra-Short-Depth-LCD-Console-Drawer

Legal Information
First English printing, February 2021
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment.

Safety Instructions

Please read all of these instructions carefully before you use the device. Save this manual for future reference.

  • Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
  • Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with temperatures not exceeding 40º Celsius (104º Fahrenheit).
  • When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing damage to other equipment or injury to persons nearby.
  • When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the power supply. Proper air convection is necessary to keep it from overheating.
  • Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
  • If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed on the equipment’s ratings label.
  • Observe all precautions and warnings attached to the equipment.
  • If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being damaged by transient over-voltage.
  • Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power supply or on other hardware may cause damage, fi re or electrical shock.
  • Only qualifi ed service personnel should open the chassis. Opening it yourself could damage the equipment and invalidate its warranty.
  • If any part of the equipment becomes damaged or stops functioning, have it checked by qualifi ed service personnel.

What the warranty does not cover

  • Any product, on which the serial number has been defaced, modifi ed or removed.
  • Damage, deterioration or malfunction resulting from:
    • Accident, misuse, neglect, fi re, water, lightning, or other acts of nature, unauthorized product modifi cation, or failure to follow instructions supplied with the product.
    • Repair or attempted repair by anyone not authorized by us.
    • Any damage of the product due to shipment.
    • Removal or installation of the product.
    • Causes external to the product, such as electric power fl uctuation or failure.
    • Use of supplies or parts not meeting our specifi cations.
    • Normal wear and tear.
    • Any other causes which does not relate to a product defect.
  • Removal, installation, and set-up service charges.

Before Installation

  • It is very important to mount the equipment in a suitable cabinet or on a stable surface.
  • Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration.

Unpacking
The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition. If anything is missing, or damaged, contact the supplier immediately.

How To Clean Your LCD Monitor
Caution :

  • To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or plugging your monitor into an electrical outlet.
  • When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can scratch or damage your display. Pressure damage is not covered under warranty.
  • Use only cleansers made specifi cally for cleaning monitors and monitor screens. Cleansers not made to clean monitors and monitor screens can scratch the LCD display or strip off the fi nish.
  • Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly onto the screen or case can cause damage which is not covered under warranty.
  • Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based paper product such as paper towels can scratch your LCD screen.

Cleaning Your Monitor
To clean your LCD safely, please follow these steps:

  1. Disconnect the power cord.
  2. Gently wipe the surface using a clean, dry microfi ber cloth. Use as little pressure as possible.

Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please follow these steps :

  1. Disconnect the power cord.
  2. Spray a small amount of non-abrasive cleanser on a microfi ber cloth.
    Caution: Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your microfi ber cloth fi rst, not directly on the parts you are cleaning.
  3. Gently wipe the surface. Use as little pressure as possible.
  4. Wait until your monitor is completely dry before plugging it in and powering it up.

Package Content

CyberView-F1417-1U-Ultra-Short-Depth-LCD-Console-Drawer-1

– CX-6A 6ft DVI-D console cable X 1 ( Alternative : CB-6A 6ft VGA console cable ) – 2.5A Power adapter & Power cord X 1 – M6 screw, cage nut & cup washer X 8

Structure Diagram

CyberView-F1417-1U-Ultra-Short-Depth-LCD-Console-Drawer-2

  1. LCD interchangeable module kit
  2. Installation Slides
  3. Molded front handle
  4. Audio speaker ( for SDI or HDMI option )
  5. LCD membrane
  6. Micro switch for screen auto power off
  7. eyboard interchangeable module kit
  8. Mouse interchangeable module kit
  9. Front USB port for device access ( USB Hub KVM only )

The above package content is only for the single console models. It varies with options such as KVM, SDI, HDMI, Touchscreen & DC power.

Dimensions

CyberView-F1417-1U-Ultra-Short-Depth-LCD-Console-Drawer-3CyberView-F1417-1U-Ultra-Short-Depth-LCD-Console-Drawer-4

 

Model

Product Dimension (W x D x H) Packing Dimension (W x D x H)  

Net Weight

Gross Weight
 

F1417

441.6 x 400 x 44 mm

17.4 x 15.7 x 1.73 inch

590 x 622 x 140 mm

23.2 x 24.5 x 5.5 inch

8.6 kg

18.9 lb

13.6 kg

29.9 lb

The weight is only for the single console models. It varies with accessories & options such as KVM, SDI, HDMI & DC power.

Installation

Step-1
Insert the left and right rear mounting brackets into the LCD console drawer.

CyberView-F1417-1U-Ultra-Short-Depth-LCD-Console-Drawer-5

Step-2

  • Measure the depth of the front and rear mounting rails.
  • Align each rear mounting bracket to a suitable length.

CyberView-F1417-1U-Ultra-Short-Depth-LCD-Console-Drawer-6

Step-3
Complete the installation. Fix the LCD console drawer into the rack.CyberView-F1417-1U-Ultra-Short-Depth-LCD-Console-Drawer-7
M6 screw, cage nut & cup washer x 8 are provided.

How to use the drawer

CyberView-F1417-1U-Ultra-Short-Depth-LCD-Console-Drawer-8

  • Press the handle button and gently slide out the drawer.
  • Flip up the LCD to a suitable angle.CyberView-F1417-1U-Ultra-Short-Depth-LCD-Console-Drawer-9
  • Operate the LCD console drawer.
Connection to USB Server via CX-6A cable

CyberView-F1417-1U-Ultra-Short-Depth-LCD-Console-Drawer-10

Connection to external KVM via CX-6A cable

CyberView-F1417-1U-Ultra-Short-Depth-LCD-Console-Drawer-11

Caution: The LCD console drawer is hot-pluggable, but components of connected devices, such as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while servers and KVM are powered on may cause irreversible damage to the servers, KVM and LCD console drawer. Before attempting to connect anything to the LCD console drawer, we suggest turning off the power to all devices. Apply power to connected devices again only after the LCD console drawer is receiving power. The company is not responsible for damage caused in this way.

Connection to USB Server via CB-6A cable

CyberView-F1417-1U-Ultra-Short-Depth-LCD-Console-Drawer-12

Connection to external KVM via CB-6A cable

CyberView-F1417-1U-Ultra-Short-Depth-LCD-Console-Drawer-13

Product Specifications

LCD

Panel

F1417
Native Resolution 1920 x 1080
Panel Size ( diagonal ) 17.3
Brightness ( cd/m² ) 400
Contrast Ratio ( typ. ) 600:1
Colors 16.7 M, 8-bit
Viewing Angle ( L/R/U/D ) 80/80/60/80
Response Time ( ms ) 5.5
Dot pitch ( mm ) 0.1989
Display Area ( mm ) 381.888H x 214.812V
Surface treatment Anti-glare, Hard-coating
Surface hardness 3H
Backlight Type LED
MTBF ( hrs ) 50,000
Video

Connectivity

Digital HDMI HDMI 1.4, HDCP 1.4
DVI DVI-D, TMDS single link
Analog VGA Analog 0.7Vp-p
Display Port DP 1.0 / HDCP 1.3
Composite ( BNC ) NTSC & PAL
Plug & Play DVI / VGA VESA EDID structure 1.3
Synchronization VGA Separate, Composite & SOG
Power Power Supply Range Auto-sensing 100 to 240VAC,

50 / 60Hz

Power Consumption for

Single Console

Screen ON Max. 14W
Power saving mode Max. 2W
Power button OFF Max. 1W
Power Consumption

with KVM integration

Screen ON Max. 45W
Power saving mode Max. 34W
Compliance EMC FCC & CE certified
Safety CE / LVD certified
Environment RoHS3 & REACH compliant
Environmental Conditions Operating Temperature                                   0 to 55°C degree
Humidity                                        20~90%, non-condensing
Altitude                                          16,000 ft
Storage /

Non-operating

Temperature -20 to 60°C degree
Humidity 5~90%, non-condensing
Altitude 40,000 ft
Shock 10G acceleration (11ms duration)
Vibration 10~300Hz 0.5G RMS random
Physical

Specification

F1417
Product ( W x D x H ) 441.6 x 400 x 44 mm

17.4 x 15.7 x 1.73 inch

Packing ( W x D x H ) 590 x 622 x 140 mm

23.2 x 24.5 x 5.5 inch

Net Weight 8.6 kg / 18.9 lb
Gross Weight 13.6 kg / 29.9 lb+-
Applicable

Format

DVI-D / VGA Input PC Signal 1920 x 1080 x 60Hz
1680 x 1050 x 60Hz
1440 x 900 x 60Hz
1360 x 768 x 60Hz
1280 x 1024 x 60Hz
1280 x 768 x 60Hz
1280 x 720 x 60Hz
1152 x 864 x 60Hz
1024 x 768 x 60Hz
800 x 600 x 60Hz
720 x 400 x 70Hz
640 x 480 x 60Hz
Audio Signal 2ch Linear PCM
HDMI Input PC Signal Same as VGA
HDMI 1.4 1920 x 1080 x 50 / 60Hz ( 1080p )
1920 x 1080 x 25 / 30Hz ( 1080i )
1280 x 720 x 50 / 60Hz ( 720p )
720 x 480 x 50 / 60Hz ( 576p / 480p )
Audio Signal 2ch Linear PCM
Display port Input PC Signal 1920 x 1080 x 60Hz
1680 x 1050 x 60Hz
1440 x 900 x 60Hz
1360 x 768 x 60Hz
1280 x 1024 x 60Hz
1280 x 768 x 60Hz
1280 x 720 x 60Hz
1152 x 864 x 60Hz
1024 x 768 x 60Hz
800 x 600 x 60Hz
720 x 400 x 70Hz
640 x 480 x 60Hz
Audio Signal 2ch Linear PCM

Standard Keyboard/Mouse Specifications

CyberView-F1417-1U-Ultra-Short-Depth-LCD-Console-Drawer-14

Key force 55 ± 5g
Travelling distance 3 ± 0.3mm
Switch life > 10 million life cycle time
OS support Windows / Linux / Unix / Mac OS

Supporting layouts

CyberView-F1417-1U-Ultra-Short-Depth-LCD-Console-Drawer-15

MAC Keyboard/Mouse Options

CyberView-F1417-1U-Ultra-Short-Depth-LCD-Console-Drawer-16

Supporting layouts
America

How to Use “MAC” Keyboard

CyberView-F1417-1U-Ultra-Short-Depth-LCD-Console-Drawer-17

SUN Keyboard/Mouse Options

CyberView-F1417-1U-Ultra-Short-Depth-LCD-Console-Drawer-18

S keyboard integrated with touchpad/trackball

  • Incorporates SUN keys, including Stop, Cut, Paste, Compose, Copy and Help
  • 104 key notepad keyboard with full numerical pad and SUN function
  • USB interface
  • US layout only

How to Use “S” Keyboard

CyberView-F1417-1U-Ultra-Short-Depth-LCD-Console-Drawer-19

Num LED in Off mode
Keypad behaves as a SUN Solar system administration command mode

Num LED in Green mode
Keypad behaves as a normal keypad mode

Audio/Display Keys 

CyberView-F1417-1U-Ultra-Short-Depth-LCD-Console-Drawer-20

On-screen Display Operation (OSD)

CyberView-F1417-1U-Ultra-Short-Depth-LCD-Console-Drawer-21

  1. Picture
    Brightness: Adjust the screen brightness
    Contrast: Adjust the difference between the image background ( black level ) and the foreground ( white level )
    Black level: Adjust background black level of the screen
    Eco: Screen in power-saving mode
  2. Position
    H-Position: To adjust the horizontal position of the video
    V-Position: To adjust the vertical position of the video
    Clock: To auto adjust H. Size of the screen
    Phase: To fine-tune the screen.
    Picture size: FULL SCREEEN / 4:3 / 5:4 / 16:10CyberView-F1417-1U-Ultra-Short-Depth-LCD-Console-Drawer-22
  3. Color
    Color temperature: User / Warm / Cool / 5400k mode and Red / Green / Blue color balance
    Sharpness: Adjust the image from weak to sharp
    Hue: Adjust the screen hue value
    Saturation: Adjust the saturation of the image color
    Dynamic luminous control: Control the dynamic brightness
  4. OSD Set
    Language: Select the language in which the OSD menu is displayed – English
    OSD H-Position: Align the screen image left or right
    OSD V-Position: Align the screen image up or down
    OSD timeout: Adjust the screen timeout
    OSD Transparency: Adjust the screen transparency
    OSD rotation : Rotate the screen – 90° / 180° / 270°CyberView-F1417-1U-Ultra-Short-Depth-LCD-Console-Drawer-23
  5. Reset
    Reset: Return the adjustment back to the factory setting
  6. MISC
    Signal source: Select the signal source – DP / HDMI1 / HDMI2
    Mute: Turn off the surrounding sound
    Audio in: Auto / Line in / DP
    Volume: Adjust the volume of sound
    Sleep mode: Set the off time – 10 min / 20 min / 30 min / 50 min / 60 min / 120 min / 240 minCyberView-F1417-1U-Ultra-Short-Depth-LCD-Console-Drawer-24

Options: 3G / HD / SD-SDI input

Austin Hughes’ SDI input is an ideal solution for the broadcast-grade video and high resolution CCTV market.
Designed for use with CyberView displays, a SDI input module can support up to 1080p @60Hz resolution without using additional space or power and it comes standard with a 2-year warranty.CyberView-F1417-1U-Ultra-Short-Depth-LCD-Console-Drawer-25CyberView-F1417-1U-Ultra-Short-Depth-LCD-Console-Drawer-26

INPUT 3G-SDI IN BNC x 1 / 0.8Vp-p ( 75 ohm )
3G-SDI OUT BNC x 1 / Active through, equalized & relocked
Standard Compliance Video SMPTE 425M / 274M / 296M / 125M

ITU-R BT.656

Audio SMPTE 299M / 272M-C
Compatible Video Format 3G-SDI 1080p @60 / 50Hz, 4:2:2
1080p @30 / 25 / 24Hz, 4:4:4
1080i @60 / 50Hz, 4:4:4
720p @60 / 50Hz, 4:4:4
HD-SDI 1080p @30 / 25 / 24Hz, 4:2:2
1080i @60 / 50Hz, 4:2:2
720p @60 / 50Hz, 4:2:2
SD-SDI 480i @60Hz, 4:2:2
ITU-R BT.656 576i @50Hz, 4:2:2
Compatible Audio Format 3G-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
HD-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
SD-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized / Asyn-

chronized Video

Max. Transmission Distance

75 ohm coaxial cable

3G-SDI 150m at 2.97Gb/s
HD-SDI 250m at 1.485Gb/s
SD-SDI 480m at 270Mb/s

DP Option-Display Port
(DP 1.0, HDCP 1.3)

CyberView-F1417-1U-Ultra-Short-Depth-LCD-Console-Drawer-27

HDMI Option – HDMI
( HDMI 1.4, HDCP 1.4 )

CyberView-F1417-1U-Ultra-Short-Depth-LCD-Console-Drawer-28

BNC Option – Composite
( BNC )CyberView-F1417-1U-Ultra-Short-Depth-LCD-Console-Drawer-29

AV4.4 Option

  • Display Port
  • HDMI
  • Composite

( DP 1.0, HDCP 1.3 ) ( HDMI 1.4, HDCP 1.4 )( BNC )CyberView-F1417-1U-Ultra-Short-Depth-LCD-Console-Drawer-30

In some circumstances, if the user connects the LCD to PC via HDMI port for video and audio signals, the LCD may display incorrectly on a full screen. If so, please adjust the display card setting on display size to fix the issue.

Touchscreen & driver

F17″ USB Touchscreen Specification

Model TRB e-Resistive
Technology
5-Wire Resistive
Touch Point
Single
Input Type
Finger or Stylus
Resolution
2048 x 2048
Response Speed
15 ms
Activation Force
≤ 50 g
Surface Hardness
3H
Light Transmission
80% ± 3%
Haze
8% ± 3%
Durability
10 million touches
Top Layer
ITO Film
Bottom Layer
ITO Glass
Thickness
2.2 ± 0.2 mm
Connector
USB Type A
Compatibility
Windows 7 / XP / Vista, Linux
  • USB touchscreen package includes 1 x 6ft USB cable, quick reference guideline and CD disc
  • For detailed information, please refer to the attached CD disc
  • As the touchscreen unit is not made of toughened glass, please handle it carefully

CyberView-F1417-1U-Ultra-Short-Depth-LCD-Console-Drawer-31

TRB Driver

Please follow the below steps to setup the touch screen:-
Step 1. Run the bundled CD disc or download the driver from the link below: http://www.austin-hughes.com/resources/driver/ultraview
Step 2. Double click the Setup.exe
Step 3. Follow the installation instruction to fi nish the setup
Step 4. After installation, run the TouchKit program & the “4 point calibration”

CyberView-F1417-1U-Ultra-Short-Depth-LCD-Console-Drawer-32

DC Power
Model 12V 24V 48V 125V
Input rating Input voltage: Input range: Input current

– No load

 

12-Volt 9 ~ 18V

 

50 mA

 

24-Volt 18 ~ 36V

 

50 mA

 

48-Volt 36 ~ 75V

 

50 mA

 

110-Volt 66 ~ 160V

 

35 mA

– Full load 4950 mA 2450 mA 1220 mA 749 mA
Output rating

Output voltage:

 

12-Volt

 

12-Volt

 

12-Volt

 

12-Volt

Output current: 4.16A 4.16A 4.16A 6.25A
Efficiency 84% 85% 85% 91%

CyberView-F1417-1U-Ultra-Short-Depth-LCD-Console-Drawer-33

For DC power option:

  1. If the unit with LCD, earthing may be required
  2. DC option excludes AC power adapter and power cord.
  3. F1417 chassis extension in depth to 400mm ( 15.7” )

ORB-2.1 2-Post Rack Mounting Brackets

Step 1

  • Before apply 2-post rack brackets, please release front mounting ears and rear mounting wheels.
  • Attach left and right mounting brackets to the drawer with the screws below :
    6#32*3.5 mm screw x 8 ( only for front ) 6#32*4.5 mm screw x 6 (only for rear)

Step 2

  • Attach the set of 4 mini brackets to the 2-post rack.
  • M6 screw set is not provided.

CyberView-F1417-1U-Ultra-Short-Depth-LCD-Console-Drawer-34

Step 3
Insert the drawer into the mini brackets.

Step 4

  • Fix the LCD console drawer to the mini brackets with 6#32*4.5 mm screw x 8.
  • Installation completedCyberView-F1417-1U-Ultra-Short-Depth-LCD-Console-Drawer-35 This step is necessary for the front. Failure to complete this will cause damage.

KVM Integration

www.austin-hughes.com/support/usermanual/cyberview/UM-CV-2KKVM-KIT.pdf

2K

KVM

Local Remote 0 8-port
0 0 -801D

www.austin-hughes.com/support/usermanual/cyberview/UM-CV-DVIKVM-KIT.pdf

Cat6

Matrix KVM

Local Remote 1 8-port 16-port 32-port
1 1 -MUIP1613 -MUIP3213
1 1 2 -MUIP1624 -MUIP3224
1 1 0 -MU1602 -MU3202
1 2 0 -MU1603 -MU3203
1 3 0 -MU1604 -MU3204

www.austin-hughes.com/support/usermanual/cyberview/UM-CV-UKVM-KIT.pdf

Local Remote 1 8-port 16-port 32-port
1 0 -UIP802 -UIP1602 -UIP3202
1 1 0 -U802 -U1602 -U3202
1 0 0 -U801 -U1601 -U3201

www.austin-hughes.com/support/usermanual/cyberview/UM-CV-MKVM-KIT.pdf

DB-15

Matrix KVM

Local Remote 1 8-port 16-port 32-port
1 1 -MIP813 -MIP1613
1 1 2 -MIP824 -MIP1624
1 1 0 -M802 -M1602
1 2 0 -M803 -M1603
1 3 0 -M804 -M1604

www.austin-hughes.com/support/usermanual/cyberview/UM-CV-SKVM-KIT.pdf

DB-15

Combo KVM

Local Remote 1 8-port 16-port 32-port
1 0 -IP802 -IP1602
1 1 0 -802 -1602
1 0 0 -S801 -S1601

www.austin-hughes.com/support/usermanual/cyberview/UM-CV-USBKVM-KIT.pdf

DB-15

USB Hub KVM

Local Remote 1 8-port 16-port 32-port
1 0 -IP802H -IP1602H
1 1 0 -802H -1602H
1 0 0 -801H -1601H
Model Product Dimension (W x D x H) Packing Dimension (W x D x H) Net Weight Gross Weight
F1417 with KVM 441.6 x 540 x 44 mm

17.4 x 21.3 x 1.73 inch

590 x 808 x 140 mm

23.2 x 31.8 x 5.5 inch

10.4 kg

22.9 lb

17 kg

37.4 lb

Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Re-position or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Documents / Resources

CyberView F1417 1U Ultra Short Depth LCD Console Drawer [pdf] User Manual
F1417, 1U Ultra Short Depth LCD Console Drawer, F1417 1U Ultra Short Depth LCD Console Drawer, LCD Console Drawer, Console Drawer, Drawer

Leave a comment

Your email address will not be published.