UltraView Large (55"/ 43"/ 32") 4K Professional LCD Video | Resources | Austin Hughes
User Manual for CyberView models including: F1417, 1U Ultra Short Depth LCD Console Drawer, F1417 1U Ultra Short Depth LCD Console Drawer, LCD Console Drawer, Console Drawer, Drawer
UM-CV-751-F1417-Q121V1 www.austin-hughes.com It is very important to mount the equipment in a suitable cabinet or on a stable surface. Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration. The equipment comes with the standard parts shown in package content.
File Info : application/pdf, 24 Pages, 2.70MB
DocumentDocumentdedicated KVM switch and rackmount screen technology User Manual 17 FHD LCD F1417 1U Ultra short depth LCD Console Drawer Ultra short depth 400mm / 15.7 Options : - SDI - HDMI / DP - DC power 751 Designed and manufactured by Austin Hughes UM-CV-751-F1417-Q121V1 www.austin-hughes.com Legal Information First English printing, February 2021 Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment. Safety Instructions Please read all of these instructions carefully before you use the device. Save this manual for future reference. Unplug equipment before cleaning. Don't use liquid or spray detergent; use a moist cloth. Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with temperatures not exceeding 40º Celsius (104º Fahrenheit). When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing damage to other equipment or injury to persons nearby. When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the power supply. Proper air convection is necessary to keep it from overheating. Arrange the equipment's power cord in such a way that others won't trip or fall over it. If you are using a power cord that didn't ship with the equipment, ensure that it is rated for the voltage and current labeled on the equipment's electrical ratings label. The voltage rating on the cord should be higher than the one listed on the equipment's ratings label. Observe all precautions and warnings attached to the equipment. If you don't intend on using the equipment for a long time, disconnect it from the power outlet to prevent being damaged by transient over-voltage. Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power supply or on other hardware may cause damage, fire or electrical shock. Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and invalidate its warranty. If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel. What the warranty does not cover Any product, on which the serial number has been defaced, modified or removed. Damage, deterioration or malfunction resulting from: Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product. Repair or attempted repair by anyone not authorized by us. Any damage of the product due to shipment. Removal or installation of the product. Causes external to the product, such as electric power fluctuation or failure. Use of supplies or parts not meeting our specifications. Normal wear and tear. Any other causes which does not relate to a product defect. Removal, installation, and set-up service charges. Regulatory Notices Federal Communications Commission (FCC) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user's authority to operate this equipment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Re-position or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. UM-CV-751-F1417-Q121V1 www.austin-hughes.com Contents < Part. 1 > F1417 1.1 Package Content P.1 1.2 Structure Diagram & Dimension P.1 1.3 Installation P.3 1.4 Connection P.5 < Part. 2 > Specifications / OSD 2.1 Product Specifications P.7 2.2 Keyboard / Mouse Specifications P.9 2.3 On-screen Display Operation ( OSD ) P.12 < Part. 3 > Options 3.1 3G / HD / SD-SDI Broadcast-grade input P.14 3.2 HDMI 1.4 video input P.15 3.3 F17 Touchscreen : Resistive 1-point touch P.16 3.4 DC Power : 12V / 24V / 48V / 125V P.18 3.5 ORB-2.1 : 2-post rack mounting brackets P.19 < Part. 4 > KVM Integration 4.1 F1417 P.20 UM-CV-751-F1417-Q121V1 www.austin-hughes.com Before Installation It is very important to mount the equipment in a suitable cabinet or on a stable surface. Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration. Unpacking The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition. If anything is missing, or damaged, contact the supplier immediately. How To Clean Your LCD Monitor Caution : To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or plugging your monitor into an electrical outlet. When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can scratch or damage your display. Pressure damage is not covered under warranty. Use only cleansers made specifically for cleaning monitors and monitor screens. Cleansers not made to clean monitors and monitor screens can scratch the LCD display or strip off the finish. Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly onto the screen or case can cause damage which is not covered under warranty. Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based paper product such as paper towels can scratch your LCD screen. Cleaning Your Monitor To clean your LCD safely, please follow these steps : 1 Disconnect the power cord. 2 Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible. Cleaning Tough Marks and Smudges To remove tough marks and smudges, please follow these steps : 1 Disconnect the power cord. 2 Spray a small amount of non-abrasive cleanser on a microfiber cloth. Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your microfiber cloth first, not directly on the parts you are cleaning. 3 Gently wipe the surface. Use as little pressure as possible. 4 Wait until your monitor is completely dry before plugging it in and powering it up. UM-CV-751-F1417-Q121V1 www.austin-hughes.com < Part 1 > < 1.1 > Package Content F1417 - CX-6A 6ft DVI-D console cable X 1 ( Alternative : CB-6A 6ft VGA console cable ) - 2.5A Power adapter & Power cord X 1 - M6 screw, cage nut & cup washer X 8 < 1.2 > Structure Diagram 3 4 1 5 6 7 8 2 9 1 LCD interchangeable module kit 2 Installation Slides 3 Molded front handle 4 Audio speaker ( for SDI or HDMI option ) 5 LCD membrane 6 Micro switch for screen auto power off 7 Keyboard interchangeable module kit 8 Mouse interchangeable module kit 9 Front USB port for device access ( USB Hub KVM only ) The above package content is only for the single console models. It varies with options such as KVM, SDI, HDMI, Touchscreen & DC power. UM-CV-751-F1417-Q121V1 P.1 www.austin-hughes.com < 1.2 > Dimension Front View Rear View Side View USB DVI-D +12 VDC Power VGA Top View UNIT : mm 1mm = 0.03937 inch Model F1417 Product Dimension (W x D x H) 441.6 x 400 x 44 mm 17.4 x 15.7 x 1.73 inch Packing Dimension (W x D x H) Net Weight Gross Weight 590 x 622 x 140 mm 23.2 x 24.5 x 5.5 inch 8.6 kg 18.9 lb 13.6 kg 29.9 lb The weight is only for the single console models. It varies with accessories & options such as KVM, SDI, HDMI & DC power. UM-CV-751-F1417-Q121V1 P.2 www.austin-hughes.com < 1.3 > Installation - Installation Slides F1417 Step 1 Insert the left and right rear mounting brackets into the LCD console drawer. Step 2 Measure the depth of the front and rear mounting rails. Align each rear mounting bracket to a suitable length. Step 3 Complete the installation Fix the LCD console drawer into the rack. M6 screw, cage nut & cup washer x 8 are provided. UM-CV-751-F1417-Q121V1 P.3 www.austin-hughes.com < 1.3 > Installation - How to use the drawer Press the handle button and gently slide out the drawer. Flip up the LCD to a suitable angle. Operate the LCD console drawer. UM-CV-751-F1417-Q121V1 P.4 www.austin-hughes.com < 1.4 > Connection to USB Server via CX-6A cable LCD Console Drawer POWER USB +12 VDC DVI-D CX-6A DVI-D console cable USB server USB DVI-D F1417 < 1.4 > Connection to external KVM via CX-6A cable LCD Console Drawer USB +12 VDC POWER CX-6A DVI-D console cable USB DVI-D DVI-D DVI console KVM Caution : The LCD console drawer is hot-pluggable, but components of connected devices, such as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while servers and KVM are powered on may cause irreversible damage to the servers, KVM and LCD console drawer. Before attempting to connect anything to the LCD console drawer, we suggest turning off the power to all devices. Apply power to connected devices again only after the LCD console drawer is receiving power. The company is not responsible for damage caused in this way. UM-CV-751-F1417-Q121V1 P.5 www.austin-hughes.com < 1.4 > Connection to USB Server via CB-6A cable POWER USB VGA +12 VDC CB-6A VGA console cable USB server USB VGA < 1.4 > Connection to external KVM via CB-6A cable LCD Console Drawer POWER USB VGA +12 VDC CB-6A VGA console cable USB VGA VGA console KVM Caution : The LCD console drawer is hot-pluggable, but components of connected devices, such as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while servers and KVM are powered on may cause irreversible damage to the servers, KVM and LCD console drawer. Before attempting to connect anything to the LCD console drawer, we suggest turning off the power to all devices. Apply power to connected devices again only after the LCD console drawer is receiving power. The company is not responsible for damage caused in this way. UM-CV-751-F1417-Q121V1 P.6 www.austin-hughes.com < Part 2 > < 2.1 > Product Specifications LCD Panel Native Resolution Panel Size ( diagonal ) Brightness ( cd/m² ) Contrast Ratio ( typ. ) Colors Viewing Angle ( L/R/U/D ) Response Time ( ms ) Dot pitch ( mm ) Display Area ( mm ) Surface treatment Surface hardness Backlight Type MTBF ( hrs ) F1417 1920 x 1080 17.3" 400 600:1 16.7 M, 8-bit 80/80/60/80 5.5 0.1989 381.888H x 214.812V Anti-glare, Hard-coating 3H LED 50,000 F1417 Video Connectivity Digital Analog Plug & Play Synchronization HDMI DVI VGA Display Port Composite ( BNC ) DVI / VGA VGA HDMI 1.4, HDCP 1.4 DVI-D, TMDS single link Analog 0.7Vp-p DP 1.0 / HDCP 1.3 NTSC & PAL VESA EDID structure 1.3 Separate, Composite & SOG Power Power Supply Range Power Consumption for Single Console Power Consumption with KVM integration * For details, please refer to our KVM rear kit user manuals Screen ON Power saving mode Power button OFF Screen ON Power saving mode Auto-sensing 100 to 240VAC, 50 / 60Hz Max. 14W Max. 2W Max. 1W Max. 45W Max. 34W Compliance Environmental Conditions EMC Safety Environment Operating Storage / Non-operating UM-CV-751-F1417-Q121V1 FCC & CE certified CE / LVD certified RoHS3 & REACH compliant Temperature Humidity Altitude Temperature Humidity Altitude Shock Vibration P.7 0 to 55°C degree 20~90%, non-condensing 16,000 ft -20 to 60°C degree 5~90%, non-condensing 40,000 ft 10G acceleration (11ms duration) 10~300Hz 0.5G RMS random www.austin-hughes.com Physical Specification Product ( W x D x H ) Packing ( W x D x H ) Net Weight Gross Weight F1417 441.6 x 400 x 44 mm 17.4 x 15.7 x 1.73 inch 590 x 622 x 140 mm 23.2 x 24.5 x 5.5 inch 8.6 kg / 18.9 lb 13.6 kg / 29.9 lb * All dimensions stated are subject to change if options are selected / integrated to base model part codes Applicable Format DVI-D / VGA Input PC Signal HDMI Input Audio Signal PC Signal HDMI 1.4 Display port Input Audio Signal PC Signal Audio Signal 1920 x 1080 x 60Hz 1680 x 1050 x 60Hz 1440 x 900 x 60Hz 1360 x 768 x 60Hz 1280 x 1024 x 60Hz 1280 x 768 x 60Hz 1280 x 720 x 60Hz 1152 x 864 x 60Hz 1024 x 768 x 60Hz 800 x 600 x 60Hz 720 x 400 x 70Hz 640 x 480 x 60Hz 2ch Linear PCM Same as VGA 1920 x 1080 x 50 / 60Hz ( 1080p ) 1920 x 1080 x 25 / 30Hz ( 1080i ) 1280 x 720 x 50 / 60Hz ( 720p ) 720 x 480 x 50 / 60Hz ( 576p / 480p ) 2ch Linear PCM 1920 x 1080 x 60Hz 1680 x 1050 x 60Hz 1440 x 900 x 60Hz 1360 x 768 x 60Hz 1280 x 1024 x 60Hz 1280 x 768 x 60Hz 1280 x 720 x 60Hz 1152 x 864 x 60Hz 1024 x 768 x 60Hz 800 x 600 x 60Hz 720 x 400 x 70Hz 640 x 480 x 60Hz 2ch Linear PCM * In some circumstances, if the user connects the LCD to PC via HDMI port or video and audio signals, the LCD may display incorrectly on a full screen. If so, please adjust the display card setting on display size to fix the issue. UM-CV-751-F1417-Q121V1 P.8 www.austin-hughes.com < 2.2 > Standard Keyboard / Mouse Specifications F1417 Ge G keyboard integrated with touchpad Gb G keyboard integrated with trackball Key force Travelling distance Switch life OS support 55 ± 5g 3 ± 0.3mm > 10 million life cycle time Windows / Linux / Unix / Mac OS Supporting layouts America United States EMEA United Kingdom Germany France Spain Italy Asia Japan Korea UM-CV-751-F1417-Q121V1 P.9 www.austin-hughes.com < 2.2 > MAC Keyboard / Mouse Options Me MAC keyboard integrated with touchpad Mb MAC keyboard integrated with trackball F7 F8 F7 F8 Supporting layouts America United States How to Use "MAC" Keyboard Keyboard Features F1 Decrease display brightness F2 Increase display brightness F3 Mission control * Only works with OS X Lion default Keyboard Shortcuts. F4 Dashboard F7 Rewind F8 Play / Pause UM-CV-751-F1417-Q121V1 P.10 F9 Fast-forward F10 Mute sound F11 Decrease volume F12 Increase volume Eject disc Command www.austin-hughes.com < 2.2 > SUN Keyboard / Mouse Options F1417 Se S keyboard integrated with touchpad Num Ca ps Scro ll Comp ose Sb S keyboard integrated with trackball Num Ca ps Scro ll Comp ose S keyboard integrated with touchpad / trackball Incorporates SUN keys, including Stop, Cut, Paste, Compose, Copy and Help 104 key notepad keyboard with full numerical pad and SUN function USB interface US layout only How to Use "S" Keyboard Num LED in Off mode Key pad behaves as a SUN Solar system administration command mode Num LED in Green mode Key pad behaves as a normal key pad mode Audio / Display Keys * Please ask your supplier for full details F9 Audio : Mute Display : Degauss F11 Audio : Decrease volume Display : Decrease contrast F12 Audio : Increase volume Display : Increase contrast UM-CV-751-F1417-Q121V1 P.11 www.austin-hughes.com < 2.3 > On-screen Display Operation ( OSD ) Power light Green = On Orange = Power saving Membrane Switch Function Power on / off LCD Display the OSD menu Scrolls through menu options and adjusts the displayed control (To auto adjustment by pressing the button for 5 seconds) Exit the OSD screen Toggle analog, digital & video connection (DVI-D and video options only) 1 Picture Brightness : Adjust the screen brightness Contrast : Adjust the difference between the image background ( black level ) and the foreground ( white level ) Black level : Adjust background black level of the screen Eco : Screen in power saving mode 2 Position H-Position : To adjust the horizontal position of the video V-Position : To adjust the vertical position of the video Clock : To auto adjust H. Size of the screen Phase : To fine tune the screen. Picture size : FULL SCREEEN / 4:3 / 5:4 / 16:10 UM-CV-751-F1417-Q121V1 P.12 www.austin-hughes.com On-screen Display Operation ( OSD ) 3 Color Color temperature : User / Warm / Cool / 5400k mode and Red / Green / Blue color balance Sharpness : Adjust the image from weak to sharp Hue : Adjust the screen hue value Saturation : Adjust the saturation of the image color Dynamic luminous control : Control the dynamic brightness 4 OSD Set Language : Select the language in which the OSD menu is displayed - English OSD H-Position : Align the screen image left or right OSD V-Position : Align the screen image up or down OSD time out : Adjust the screen timeout OSD transparency : Adjust the screen transparency OSD rotation : Rotate the screen - 90° / 180° / 270° 5 Reset Reset : Return the adjustment back to factory setting F1417 6 MISC Signal source : Select the signal source - DP / HDMI1 / HDMI2 Mute : Turn off the surrounding sound Audio in : Auto / Line in / DP Volume : Adjust the volume of sound Sleep mode : Set the off time - 10 min / 20 min / 30 min / 50 min / 60 min / 120 min / 240 min UM-CV-751-F1417-Q121V1 P.13 www.austin-hughes.com < Part 3 > < 3.1 > Options : 3G / HD / SD-SDI input Austin Hughes' SDI input is an ideal solution for the broadcastgrade video and high resolution CCTV market. Designed for use with CyberView displays, a SDI input module can support up to 1080p @60Hz resolution without using additional space or power and it comes standard with a 2-year warranty. SDI out - in +12 VDC INPUT 3G-SDI IN 3G-SDI OUT BNC x 1 / 0.8Vp-p ( 75 ohm ) BNC x 1 / Active through, equalized & relocked Standard Compliance Video Audio SMPTE 425M / 274M / 296M / 125M ITU-R BT.656 SMPTE 299M / 272M-C Compatible Video Format 3G-SDI HD-SDI SD-SDI ITU-R BT.656 1080p 1080p 1080i 720p 1080p 1080i 720p 480i 576i @60 / 50Hz, 4:2:2 @30 / 25 / 24Hz, 4:4:4 @60 / 50Hz, 4:4:4 @60 / 50Hz, 4:4:4 @30 / 25 / 24Hz, 4:2:2 @60 / 50Hz, 4:2:2 @60 / 50Hz, 4:2:2 @60Hz, 4:2:2 @50Hz, 4:2:2 Compatible Audio Format 3G-SDI HD-SDI SD-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized / Asynchronized Video Max. Transmission Distance 75 ohm coaxial cable 3G-SDI HD-SDI SD-SDI UM-CV-751-F1417-Q121V1 150m at 2.97Gb/s 250m at 1.485Gb/s 480m at 270Mb/s P.14 www.austin-hughes.com < 3.2 > Options : DP Option - Display Port ( DP 1.0, HDCP 1.3 ) DP +12 VDC HDMI Option - HDMI ( HDMI 1.4, HDCP 1.4 ) HDMI +12 VDC F1417 BNC Option - Composite ( BNC ) BNC +12 VDC AV4.4 Option - Display Port - HDMI - Composite ( DP 1.0, HDCP 1.3 ) ( HDMI 1.4, HDCP 1.4 ) ( BNC ) DP HDMI BNC +12 VDC ( 1 ) In some circumstances, if the user connects the LCD to PC via HDMI port for video and audio signals, the LCD may display incorrectly on a full screen. If so, please adjust the display card setting on display size to fix the issue. UM-CV-751-F1417-Q121V1 P.15 www.austin-hughes.com < 3.3 > Options : Touchscreen & driver F17" USB Touchscreen Specification Model Technology Touch Point Input Type Resolution Response Speed Activation Force Surface Hardness Light Transmission Haze Durability Top Layer Bottom Layer Thickness Connector Compatibility TRB e-Resistive 5-Wire Resistive Single Finger or Stylus 2048 x 2048 15 ms 50 g 3H 80% ± 3% 8% ± 3% 10 million touches ITO Film ITO Glass 2.2 ± 0.2 mm USB Type A Windows 7 / XP / Vista, Linux USB touchscreen package includes 1 x 6ft USB cable, quick reference guideline and CD disc For detailed information, please refer to the attached CD disc As the touchscreen unit is not made of toughened glass, please handle it carefully USB Touchscreen +12 VDC UM-CV-751-F1417-Q121V1 P.16 www.austin-hughes.com < 3.3 > Options : Touchscreen & driver TRB Driver Please follow the below steps to setup the touch screen:- Step 1. Run the bundled CD disc or download the driver from the link below : http://www.austin-hughes.com/resources/driver/ultraview Step 2. Double click the Setup.exe Step 3. Follow the installation instruction to finish the setup Step 4. After installation, run the TouchKit program & the "4 point calibration" Please do the initial calibration after the first setup F1417 UM-CV-751-F1417-Q121V1 P.17 www.austin-hughes.com < 3.4 > Options : DC Power Model Input rating Input voltage: Input range: Input current - No load - Full load Output rating Output voltage: Output current: Efficiency 12V 12-Volt 9 ~ 18V 50 mA 4950 mA 12-Volt 4.16A 84% 24V 24-Volt 18 ~ 36V 50 mA 2450 mA 48V 48-Volt 36 ~ 75V 50 mA 1220 mA 12-Volt 4.16A 85% 12-Volt 4.16A 85% DC power 125V 110-Volt 66 ~ 160V 35 mA 749 mA 12-Volt 6.25A 91% *** For DC power option : ( 1 ) If the unit with LCD, earthing may be required ( 2 ) DC option excludes AC power adapter and power cord. ( 3 ) F1417 chassis extension in depth to 400mm ( 15.7" ) UM-CV-751-F1417-Q121V1 P.18 www.austin-hughes.com < 3.5 > F1417 Options : ORB-2.1 2-Post Rack Mounting BracketsF1417 flat head screw 6#32*4.5mm x 3 Left bracket Right bracket round head screw 6#32*3.5mm x 4 Round head screw only for front Step 1 Before apply 2-post rack brackets, please release front mounting ears and rear mounting wheels. Attach left and right mounting brackets to the drawer with the screws below : 6#32*3.5 mm screw x 8 ( only for front ) 6#32*4.5 mm screw x 6 ( only for rear ) M6 screw set x 8 Step 2 Attach the set of 4 mini brackets to the 2-post rack. M6 screw set is not provided. Step 3 Insert the drawer into the mini brackets. Apply if necessary flat head screw 6#32*4.5mm x 2 flat head screw 6#32*4.5mm x 2 UM-CV-751-F1417-Q121V1 Step 4 Fix the LCD console drawer to the mini brackets with 6#32*4.5 mm screw x 8. Installation completed This step is necessary for front. Failure to complete this will cause damage. P.19 www.austin-hughes.com < 4.2 > F1417 KVM Integration www.austin-hughes.com/support/usermanual/cyberview/UM-CV-2KKVM-KIT.pdf 2K KVM Local Remote 8-port - 0 0 0 -801D - www.austin-hughes.com/support/usermanual/cyberview/UM-CV-DVIKVM-KIT.pdf DVI-D KVM Local Remote 12-port - 1 0 0 -1201D - www.austin-hughes.com/support/usermanual/cyberview/UM-CV-MUKVM-KIT.pdf Cat6 Matrix KVM Local Remote 1 1 1 1 1 2 8-port - - 1 1 0 - 1 2 0 - 1 3 0 - 16-port -MUIP1613 -MUIP1624 -MU1602 -MU1603 -MU1604 www.austin-hughes.com/support/usermanual/cyberview/UM-CV-UKVM-KIT.pdf Cat6 Combo KVM Local Remote 1 0 1 1 1 0 8-port -UIP802 -U802 1 0 0 -U801 16-port -UIP1602 -U1602 -U1601 www.austin-hughes.com/support/usermanual/cyberview/UM-CV-MKVM-KIT.pdf DB-15 Matrix KVM Local Remote 1 1 1 1 1 2 8-port -MIP813 -MIP824 1 1 0 -M802 1 2 0 -M803 1 3 0 -M804 16-port -MIP1613 -MIP1624 -M1602 -M1603 -M1604 www.austin-hughes.com/support/usermanual/cyberview/UM-CV-SKVM-KIT.pdf DB-15 Combo KVM Local Remote 1 0 1 1 1 0 8-port -IP802 -802 1 0 0 -S801 16-port -IP1602 -1602 -S1601 www.austin-hughes.com/support/usermanual/cyberview/UM-CV-USBKVM-KIT.pdf DB-15 USB Hub KVM Local Remote 1 0 1 1 1 0 8-port -IP802H -802H 1 0 0 -801H 16-port -IP1602H -1602H -1601H - - 32-port -MUIP3213 -MUIP3224 -MU3202 -MU3203 -MU3204 32-port -UIP3202 -U3202 -U3201 32-port - 32-port - 32-port - Model F1417 with KVM Product Dimension Packing Dimension (W x D x H) (W x D x H) 441.6 x 540 x 44 mm 590 x 808 x 140 mm 17.4 x 21.3 x 1.73 inch 23.2 x 31.8 x 5.5 inch Net Weight 10.4 kg 22.9 lb Gross Weight 17 kg 37.4 lb The company reserves the right to modify product specifications without prior notice and assumes no responsibility for any error which may appear in this publication. All brand names, logo and registered trademarks are properties of their respective owners. Copyright 2021 Austin Hughes Electronics Ltd. All rights reserved. UM-CV-751-F1417-Q121V1 P.20 www.austin-hughes.com