Monster Shock Pro Portable Bluetooth Speaker

Product Overview

The Monster Shock Pro is a portable Bluetooth speaker designed for on-the-go audio enjoyment. It offers versatile connectivity and user-friendly controls.

Included in the Box:

• Speaker
• USB-C Charging Cable
• Lifting rope
• AUX IN Cable
• Quick Start Guide & Warning card

LED Indicator and Voice Prompt Guide

Button Controls and Ports

The speaker features intuitive controls and various input ports for different audio sources.

Diagram Description: The top panel of the speaker features several buttons and ports. A diagram illustrates the layout:

• [1] Power On/Off Button: Long press to power the speaker on or off. Short press activates the voice assistant.
• [2] Charging Indicator Light: Red light indicates charging. Green light indicates the speaker is fully charged.
• [3] Previous Song/Volume Down: Long press to go to the previous song. Short press to decrease volume.
• [4] Play/Pause: Short press to play or pause music. Long press to disconnect Bluetooth.
• [5] Next Song/Volume Up: Long press to go to the next song. Short press to increase volume.
• [6] Mode Switch: Press to cycle through different audio input modes (Bluetooth, USB, SD, AUX).
• [7] MIC: Microphone input port.
• [8] Equaliser: Press to switch between sound effect modes (Indoor, Outdoor, Deep Bass).
• [9] AUX Input: Connect external audio devices using an audio cable.
• [10] Micro SD Card Input: Insert a Micro SD card for audio playback.
• [11] USB (Audio) Input: Connect a USB storage device for audio playback.
• [12] USB-C Charging: Port for charging the speaker using the included USB-C cable.

Call Functions:

• Answer Call: Short press the [Play/Pause Button].
• End Call: Short press the [Play/Pause Button].
• Reject/Return Call: Double click the [Play/Pause Button].

Quick Start Guide

Charging the Speaker

For optimal performance, fully charge the speaker before first use. Use the included USB-C charging cable. A 5V/1A or higher power adapter (not included) is recommended.
Caution: Using incompatible chargers may cause damage. Do not use if the connector or device is wet or damaged.

Powering On/Off

To turn the speaker on, press and hold the [Power On/Off Button] for 2 seconds. You will hear a power-on tone. To turn the speaker off, press and hold the [Power On/Off Button] for 2 seconds. You will hear a power-off tone.
Power Saving: If no Bluetooth device is connected for 5 minutes, the speaker will automatically turn off.

Bluetooth Connection

• When first turned on, the speaker automatically enters waiting mode for connection.
• If a Bluetooth device is already connected, long press the [Play/Pause Button] to disconnect the current connection and pair with a new device.
• The speaker enters pairing mode if it is not connected to a Bluetooth device.
• To connect: Enable the Bluetooth function on your mobile phone, search for "Monster Shock Pro", and connect. Upon successful connection, you will hear a voice prompt, and the blue indicator light will change from flashing to solid on.

Music Control

• Play/Pause: Short press the [Play/Pause Button].
• Previous Song: Long press the [Previous Song/Volume Down Button].
• Next Song: Long press the [Next Song/Volume Up Button].

Volume Control

• Volume Up: Short press the [Next Song/Volume Up Button].
• Volume Down: Short press the [Previous Song/Volume Down Button].

Playback Modes

The speaker prioritizes playback from inserted media or connected devices. Press the [Mode Switch Button] to cycle through modes if needed.

• USB IN (Audio) Playback: When a USB drive is inserted, it becomes the priority playback source.
• Micro SD Card Playback: When a Micro SD card is inserted, it becomes the priority playback source.
• AUX IN Playback: When an audio source is connected via AUX IN, it becomes the priority playback source.

Connect Two Speakers for Stereo Sound (TWS - True Wireless Stereo)

This feature allows two Monster Shock Pro speakers (same model) to be paired for a stereo audio experience.

1. Turn on two Monster Shock Pro speakers. Ensure neither is connected to a Bluetooth device.
2. On one speaker, double-click the [Mode Switch Button] twice. You will hear a voice prompt, and the speakers will automatically pair. After the connection is successful, the blue indicator light will be flashing on the main speaker, and the blue indicator light will be solid on the secondary speaker.
3. Enable the Bluetooth function of your mobile phone, search for "Monster Shock Pro", and connect. After the connection is successful, you will hear a voice prompt, the blue indicator light will be solid on the main speaker, and the blue indicator light will be solid on the secondary speaker.
4. To exit TWS pairing mode, double-click the [Mode Switch Button] again. The blue indicator light will flash.

Equaliser (EQ) Function

The speaker offers three sound effect modes: Indoor sound effect, Outdoor sound effect, and Deep bass sound effect. Press the [Equaliser Button] to cycle through these modes.

Voice Assistant

In Bluetooth mode, short press the [Power On/Off Button] to activate your device's voice assistant (e.g., Siri, Google Assistant).

Cautions

• It is not recommended to replace the battery privately.
• The battery (or battery pack) must not be exposed to excessive heat, such as direct sunlight or fire.

Regulatory Information

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

FCC ID: 2AVD2-MS62121

IC Statement (Canada)

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device.

RF exposure statement: The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

(French Translation)

Cet appareil contient des émetteurs/récepteurs exemptés de licence conformes aux RSS (RSS) d'Innovation, Sciences et Développement économique Canada. Le fonctionnement est soumis aux deux conditions suivantes: Cet appareil ne doit pas causer d'interférences. Cet appareil doit accepter toutes les interférences, y compris celles susceptibles de provoquer un fonctionnement indésirable de l'appareil.

Déclaration d'exposition RF: L'appareil a été évalué pour répondre aux exigences générales d'exposition aux RF. L'appareil peut être utilisé dans des conditions d'exposition portable sans restriction.