IDEC FC6A-J8A1 Cyfrol 8pttage Mod Mewnbwn Cyfredol
Manylebau
- Cynnyrch: IDEC FC6A Plus PLC
- Systemau Gweithredu: Windows 10/Windows 11
- Cyflenwad Pwer: 24V DC
- Connectivity: 2 Ethernet ports (Port 1 used for AWS IoT Core)
Gwybodaeth Dogfen
Hanes adolygu dogfennau
Systemau gweithredu sy'n berthnasol i'r canllaw hwn
Operation System: Windows 10/Windows 11
Drosoddview
IDEC FC6A is a multifunctional PLC equipped with powerful IoT capabilities, all within compact hardware.
It supports the MQTT protocol, allowing the PLC to connect to MQTT brokers and cloud services. Additionally, it features a dedicated user interface for connecting to AWS IoT Core, enabling PLC programmers to easily establish communication between the PLC and AWS IoT Core.
Mae'r canllaw hwn yn esbonio sut i gysylltu'r IDEC FC6A Plus PLC ag AWS IoT Core.
Disgrifiad Caledwedd
Datasheet/Brochure
https://us.idec.com/idec-us/en/USD/Programmable-Logic-Controller/Micro-PLC/FC6A-MicroSmart-PLC/c/MicroSmart_FC6A?page=1
Eitemau a Ddarperir gan Ddefnyddwyr
The package for the FC6A Plus CPU unit includes only the CPU unit and the I/O terminal block. Please note that you will need to provide a USB cable (USB-A to USB Mini-B) and a 24V power supply separately.
Eitemau prynadwy trydydd parti
Dim
Sefydlu Eich Amgylchedd Datblygu
Gosod offer (IDEs, Toolchains, SDKs)
Mae angen meddalwedd WindLDR i raglennu'r rhaglen PLC. Mae IDEC yn cynnig y gyfres Automation Organizer, sy'n cynnwys y feddalwedd WindLDR. Y rhif rhan ar gyfer prynu Automation Organizer yw SW1A-W1C. Gwiriwch gyda dosbarthwr IDEC neu fanwerthwr ar-lein awdurdodedig.
https://us.idec.com/idec-us/en/USD/Software/Automation-Organizer/p/SW1A-W1C
Set Up Device Hardware
- <Power Supply>
The IDEC FC6A Plus requires a 24V DC power supply. Connect the 24V power supply unit to the connector on the FC6A. - <Internet Connection>
The FC6A Plus has two Ethernet ports. Port 1 is located on the upper side, and Port 2 is on the lower side of the unit. To connect to AWS IoT Core, use Port 1 (upper side).
Set up your AWS account and permissions
If you do not have an existing AWS account and user, refer to the online AWS documentation titled “Set Up Your AWS Account.” To get started, follow the steps outlined in the sections below:
- Cofrestrwch ar gyfer cyfrif AWS
- Creu defnyddiwr gweinyddol
- Open the AWS IoT Console
Creu Adnoddau IoT AWS
Refer to the online AWS documentation at Create AWS IoT Resources. Follow the steps outlined in the sections below to provision resources for your device:
- Create an AWS IoT policy
- Create a Thing object
Darparu'r Dyfais â Manylion
Refer to pages 12 and 18 in the following document.
These sections explain how to download the Root (Server) CA, the certificate file ar gyfer yr FC6A, a'r allwedd breifat file, yn ogystal â sut i'w mewnforio i'r FC6A.
Build the Demo
Refer to pages 1 to 22 in the following document. These pages explain how to connect the FC6A to AWS IoT Core. Follow the step-by-step tutorial to complete the connection process.
Rhedeg y Demo
Refer to pages 24 to 31 in the following document for instructions on how to publish and subscribe to data using AWS IoT Core.
Dilyswch negeseuon yn AWS IoT Core
Refer to pages 24 to 31 in the following document for instructions on how to publish and subscribe to data using AWS IoT Core.
https://us.idec.com/idec-us/en/USD/medias/FC6A-MQTT-AWSIoTCore-Training.pdf?context=bWFzdGVyfHJvb3R8MTE3NDA2NnxhcHBsaWNhdGlvbi9wZGZ8aDU4L2hhZC85MTcxNTM4OTAzMDcwLnBkZnw4ODk4ZjcwNGIyNTE2ZTQ0OGZkMjMxMGE2NDUyNzcyNGI5YWMzOWIzOGJmM2JiOTMxYWVmZThkZmVjZDgwMzYw
Datrys problemau
Refer to page 33 in the following document, which details the MQTT connection error codes.
https://us.idec.com/idec-us/en/USD/medias/FC6A-MQTT-AWSIoTCore-Training.pdf?context=bWFzdGVyfHJvb3R8MTE3NDA2NnxhcHBsaWNhdGlvbi9wZGZ8aDU4L2hhZC85MTcxNTM4OTAzMDcwLnBkZnw4ODk4ZjcwNGIyNTE2ZTQ0OGZkMjMxMGE2NDUyNzcyNGI5YWMzOWIzOGJmM2JiOTMxYWVmZThkZmVjZDgwMzYw
Am ragor o wybodaeth, cyfeiriwch at ddogfennaeth ar-lein AWS ar Ddatrys Problemau AWS IoT.
Cwestiynau Cyffredin
What is the power supply requirement for IDEC FC6APlus?
The IDEC FC6A Plus requires a 24V DC power supply.
Where can I find the necessary software for programming the PLC application?
You can install WindLDR software from the Automation Organizer suite, available for purchase with part number SW1A-W1C.
Which Ethernet port should be used for connecting to AWS IoT Core?
Port 1 (upper side) of the FC6A Plus should be used for connecting to AWS IoT Core.
Dogfennau / Adnoddau
 |
IDEC FC6A-J8A1 Cyfrol 8pttage Mod Mewnbwn Cyfredol [pdfCanllaw Defnyddiwr FC6A-J8A1 Cyfrol 8pttagMod Mewnbwn Cerrynt e, FC6A-J8A1, Cyf 8pttage Mewnbwn Cyfredol Mod, Cyftage Mod Mewnbwn Cerrynt, Mod Mewnbwn Cerrynt, Mod Mewnbwn, Mod |