Cofnodwr Data Amser Real Aml-ddefnydd Elitech RCW-360 Plus

Drosoddview
This device is a wireless Internet of Things (loT) monitoring product that offers real-time monitoring, alarms, data logging, data uploading, and large screen display for temperature and humidity at monitoring points. When paired with the “Elitech Cold Cloud” cloud platform and app, it enables remote data viewing, historical data queries, remote alarm notifications, and device GPS positioning (only for the 4G version). The product is widely used in industries such as food, pharmaceuticals, catering, and international warehousing logistics. It features an aviation plug for easy sensor replacement. The main unit supports both 4G and Wi-Fi, allowing you to choose between 4G or Wi-Fi communication methods. The main unit comes with dual channels, and the external probes offer several options: single temperature, dual temperature, gel bottle, ultra-low temperature, and temperature and humidity.
Nodweddion
- The product is suitable for various occasions, including warehouse, refrigerated storage, refrigerator car, shade cabinet, medicine cabinet, refrigerator lab1 etc;
- Maint cryno, ymddangosiad ffasiynol, dyluniad hambwrdd cerdyn magnetig, gosodiad hawdd;
- Arddangosfa sgrin lliw TFT mawr, sy'n gyfoethog o ran cynnwys;
- Mae batri lithiwm aildrydanadwy adeiledig yn galluogi uwchlwytho data amser real amser hir ar ôl toriad pŵer;
- Gall dyfais larwm sain-golau adeiledig wireddu larwm lleol;
- Mae lleoli GPS yn caniatáu olrhain lleoliad yr offer mewn amser real (fersiwn 4G yn unig);
- Mae swyddogaeth argraffu Bluetooth yn galluogi argraffu a chofnodi data ar y safle;
- Illumination intensity sensing function enables detection of the door up/dose status to realize automatic screen-on/off;
- Mathau lluosog o stiliwr ar gael (gweler y rhestr ddethol enghreifftiol am fanylion).
Rhyngwyneb
Fersiwn 4G 
WIFI fersiwn 
- Statws monitro
- Sianel 1
- Tymheredd presennol
- Marc terfyn uchaf
- Marc terfyn is
- Sianel 2
- Terfynau larwm uchaf ac isaf ar gyfer gosod tymheredd
- Terfynau larwm uchaf ac isaf ar gyfer gosod lleithder
- Dwysedd signal
- Amser a dyddiad
- Eicon GPS

- Eicon statws pŵer

- Eicon WIFI

- The number of local data cache groups that have not yet been uploaded to network 15 Current humidity
- Temperature and humidity display area (actual version shall prevail) 17 Current Light Intensity
Pan fo'r tymheredd a'r lleithder yn uwch na'r terfynau uchaf, mae'r gwerthoedd mewn coch; Pan fydd y tymheredd a'r lleithder yn is na'r terfynau is, mae'r gwerthoedd mwyn mewn glas.

- Synhwyrydd ffotosensitif
- Archwiliwr allanol 1
- Botwm ymlaen / i ffwrdd
- Hambwrdd cerdyn magnetig
- Rhyngwyneb cerdyn SIM (fersiwn 4G yn unig)
- Botwm “Cychwyn”.
- Rhyngwyneb codi tâl
- Dangosydd codi tâl
- Dangosydd statws larwm
- Archwiliwr adeiledig
- Archwiliwr allanol 2
- Sgrin
- Menu” button
- Stopio” botwm
- Rhyngwyneb Archwilio Allanol
Rhestr Dethol Model
Collection Host: R[W-360 Plus
Tips:The specific host model is subject to the actual product; The host does not come with a probe. Choose a probe according to actual needs, and each channel can be adapted to the following types of probes.
Probe model: the conventional probe models are shown in the table below
| Math o archwiliwr | Single temperature | Tymheredd deuol | Ciel bottle temperature | Tymheredd a lleithder | Tymheredd uwch-isel |
| Model | T□lX-TE-H | T□lX-TOE-H | T□3X-TE(GLE)-H | HT□3X-THE-H | PT100IIC-TLE-H |
| [able | 5 o Fesurau | 5 o Fesurau | 2 o Fesurau | 5 o Fesurau | 3 o Fesurau |
| Pwynt | One temperature probe | Two temperature probe | One temperature probe | 1 temperature probe and 1 humidity probe | One temperature probe |
| Amrediad | -4O°C~B5°C | PT100IIC-TLE-H H:0%RH~100%RH | -2□O°C~15O°C | ||
| Cywirdeb | ±O.S°C | T:±O.SOC H,±5%RH | ±O.5°C(-4O~B5°C)±1°C(-1□O~15O°C)±2°C(others) | ||
Note: The specific sensor type is subject to the actual product.
Paramedrau Technegol
- Power Supply: Power adapter: 5V2A (DC), Type-( interface
- Battery: 4000mAh/3.7V rechargeable lithium battery
- Endurance: No less than 20 days (at 25°(, upload interval 5 minutes, good network environment) No less than 7 days (at 25°(, upload interval 5 minutes, GPS positioning, good network environment)
- Cywirdeb Lleoliad:
- GPS: . SO meters, positioning interval consistent with recording interval, and not less than 5 minutes
- LBS: Urban areas :S.500 meters, rural areas s3km
- Storage Capacity: 100,000 data sets (cyclic storage)
- Recording Interval: 1 minute to 24 hours, default: normal recording interval 5 minutes, alarm recording interval 2 minutes
- Upload Interval: 1 minute to 24 hours, default: normal upload interval 5 minutes, alarm upload interval 2 minutes
- Local Alarm: Buzzer, LED
- Platform Alarm: Voice, SMS, WeChat, APP, Email
- Sgôr dal dŵr: IP65
- 0perating Environment: -20~60°C, 0~100%RH (no condensation), below 1km altitude
- Storage Environment: -20~60°(, 0~90%RH
- Product Weight: Main unit approximately 200g
- Dimensiynau Cynnyrch: 109 * 69.5 * 23mm
Cyfarwyddiadau Gweithredu
- Gosod a thynnu'r stiliwr (Rhyngwyneb pen awyren yn unig)
Fel y dangosir yn Ffigur, aliniwch y plwg hedfan yn gyntaf â'r rhyngwyneb a'i fewnosod, yna trowch y sgriw yn glocwedd i drwsio'r stiliwr. I ddadosod, trowch y sgriw yn wrthglocwedd a thynnwch y stiliwr allan.
- Codi tâl
Cysylltwch â'r addasydd pŵer trwy gebl USB.
Wrth godi tâl, mae'r dangosydd codi tâl yn fflachio; Pan gaiff ei wefru'n llawn, mae'r dangosydd codi tâl ymlaen bob amser. - Pŵer ymlaen / i ffwrdd
Pwyswch y botwm pŵer ymlaen / i ffwrdd am 5 eiliad i droi'r ddyfais ymlaen / i ffwrdd.
Ni chaniateir i ddiffodd pan fydd recordio yn y broses. - Dechrau recordio
Pan fydd yr offer mewn cyflwr rhedeg heb ei fonitro, pwyswch y botwm “Start” am 5 eiliad; cliciwch ar y botwm “Cychwyn” yn y blwch naid i glicio “Ie”, ac yna cliciwch ar y botwm “Dewislen” i gadarnhau'r cychwyn.
- Stopio recordio
Pan fydd yr offer mewn cyflwr rhedeg wedi'i fonitro, pwyswch y botwm "Stop" am 5 eiliad; cliciwch ar y botwm “Cychwyn” yn y blwch naid i glicio “Ie”, ac yna cliciwch ar y botwm “Dewislen” i gadarnhau'r stop.
- Uchafswm, Isafswm, Cyfartaledd View
Click the “Menu” button to enter the maximum, minimum and average display page .
- Bwydlen
Press the 11 menu11 button for 3 seconds to enter the main menu page.
The functions of the buttons in the menu are as follows:- “Menu” button: confirm/select
- Botwm “Cychwyn”: newid i fyny
- Botwm “Stop”: trowch i lawr
View gwybodaeth ffurfweddu
Including: normal recording interval, alarm recording interval, normal uploading interval, alarm uploading interval, buzzer alarm on/off, GPS positioning on/off, temperature alarm delay, humidity alarm delay and other parameters.

View gwybodaeth dyfais
Including: device name, GUI□, offline data capacity, IME1,1cc1□.

Gosodiad arddangos
- Enter the “Display Settings” menu to set bacl<light brightness, backlight time and date format. Brightness: 5 levels of brightness available, and 5 is the brightest.
- Amser cefn golau: 4 opsiwn ar gael, hy 1 munud, 10 munud, 30 munud ac ymlaen fel arfer.
- Date format: 3 options available, i.e. yyyy-mm-dd, dd-mm-yyyy, mm-dd- yyyy .

Ychwanegu dyfais i'r llwyfan a gweithrediad. Cyfeiriwch at IV Elitech iCold.
Elitech iCold
- Lawrlwythwch a Gosodwch APP
Please scan the QR code on the cover of the manual or search Elitech iCold APP Store or Google play to download Elitech App. - Cofrestru cyfrif a mewngofnodi i'r APP
Open the APP, in the login page, as shown in Figure 1, follow the prompts, enter the verification information, and click “Login”. After entering the APP, select “mm
PS:
- If you have not an account, please click on “Register” in the login page, as shown in Figure 2, follow the prompts and enter verification information to complete account registration.
- If you forget the password, click “Forget password” to find password as shown in Figure 3. According to the prompts to finish verfication and find out password.

Ychwanegu Dyfais
- Cliciwch
yn y gornel dde uchaf - Cliciwch
in the upper right corner, scan the QR code or enter GUI□ back on the device, then fill in the device name and choose time zone. - Cliciwch “
“, the device is added.
- Tip: If the device shows off line After being added to the platform, first check the network icon and offline records on the device. If everything is normal, please wait for a few minutes or restart the device before turning it on. The device uploads data according to the set reporting cycle; If the device is offline for a long time, please check if the SIM card is overdue. Ultimately unable to resolve, please call the service hotline for consultation.
- Rhwydwaith dosbarthu WIFI
- Press and hold the “Menu” key, briefly to enter the “WIFI Config” page.
- Press the “Menu” key and a Wi-Fi icon
“bydd yn ymddangos yng nghornel chwith uchaf y ddyfais - Use the app to distribute the network with this device via Wi-Fi, as shown in the following figures 1-3

- Ffurfweddu math y chwiliedydd
Wrth ddefnyddio'r ddyfais am y tro cyntaf neu newid math y stiliwr, mae angen ail-gyflunio'r stiliwr, fel y dangosir yn Ffigur 4 a Ffigur 5 ar gyfer gweithredu;
Operation method: Log in to the APP ➔select the device to be changed ➔select “Parameter Configuration” ➔select “User Parameters” ➔select the corresponding probe model based on the actual selected probe type and channel ➔click “SET”.
Nodyn:
- After reconfiguring the probe type, it is necessary to wait for an upload cycle to synchronize the probe type to the device, or the device can be restarted to synchronize immediately.
- Amnewid y stiliwr. Oherwydd y gwahaniaeth amser rhwng amnewid y stiliwr a'i ffurfweddu, efallai bod data diffygiol yn y rhestr ddata.
Rheoli Dyfais
- After the device has started recording and added to the platform, wait for the data to be uploaded, then display online. Start recording reference 111-3.
- If you want to make other configurations for the device, please enter the device information page, such as historical data, temperature unit, upper and lower alarm limits, upload record interval, etc. As shown in Figure 7 9 .
Note: After the device temperature unit is changed, it needs to be changed under user settings(More-Setting).

Llwyfan Elitech iCold
For more functions, please log in Elitech icold Platform: newydd.i-elitech.com.
Atodol
Bydd data am ddim a gwasanaeth platfform uwch yn cael ei actifadu ar ôl i'r ddyfais gael ei chofrestru i blatfform Elitech am y tro cyntaf. Ar ôl y cyfnod prawf, mae angen i gwsmeriaid ailwefru'r ddyfais trwy gyfeirio at y llawlyfr gweithredu.
Dogfennau / Adnoddau
![]() |
Cofnodwr Data Amser Real Aml-ddefnydd Elitech RCW-360 Plus [pdfLlawlyfr Defnyddiwr RCW-360Plus-WG, Cofnodwr Data Amser Real Aml-ddefnydd RCW-360 Plus, Cofnodwr Data Amser Real Aml-ddefnydd, Cofnodwr Data Amser Real, Cofnodwr Data Amser, Cofnodwr Data |

