Philips BA11 LED Dimmable Light Bulb User Manual

Rhagymadrodd

Thank you for choosing the Philips BA11 LED Dimmable Light Bulb. This manual provides essential information for the safe installation, operation, and maintenance of your new LED bulbs. Please read these instructions carefully before use and retain them for future reference.

These bulbs feature Warm Glow technology, which allows the color temperature to become warmer as the light is dimmed, creating a relaxing ambiance. They are designed for indoor use in various decorative fixtures.

Gwybodaeth Ddiogelwch Bwysig

Risg o sioc drydanol: Diffoddwch y pŵer i'r gosodiad wrth y torrwr cylched neu'r blwch ffiwsiau bob amser cyn ei osod, ei dynnu neu ei archwilio.
Nid ar gyfer Goleuadau Brys: These bulbs are not intended for use with emergency exits or emergency lighting.
Yn addas ar gyfer Damp Lleoliadau: These bulbs are rated for indoor use and suitable for damp lleoliadau, ond nid ar gyfer dod i gysylltiad uniongyrchol â dŵr.
Cydnawsedd pylu: Ensure your dimmer switch is compatible with LED bulbs. Incompatible dimmers may cause flickering or damage to the bulb.
Gosodiadau Caeedig: These bulbs are suitable for use in enclosed fixtures.
Tymheredd Gweithredu: Do not use in environments where the operating temperature exceeds the bulb's specified range.
Gwaredu: Gwaredu bylbiau yn unol â rheoliadau lleol.

Cynnwys Pecyn

Dylai eich pecyn gynnwys yr eitemau canlynol:

3 x Philips BA11 LED Dimmable Light Bulbs

Three Philips BA11 LED Dimmable Light Bulbs in a package

Image: Three Philips BA11 LED Dimmable Light Bulbs, showing their clear finish and candelabra base.

Gosod a Gosod

Diffodd Pŵer: Before replacing any light bulb, ensure the power to the fixture is turned off at the circuit breaker or fuse box. This prevents electrical shock.
Tynnu Hen Fwlb: Dadsgriwiwch y bwlb golau presennol o'r gosodiad yn ofalus. Gadewch iddo oeri os yw wedi bod yn cael ei ddefnyddio'n ddiweddar.
Archwiliwch y Gosodiad: Check the fixture for any damage or loose wiring. Ensure the socket is clean and dry.
Gosod Bwlb Newydd: Gently screw the Philips BA11 LED Dimmable Light Bulb into the E12 candelabra base socket. Do not overtighten.
Adfer Pwer: Unwaith y bydd y bylbiau wedi'u gosod yn ddiogel, adferwch y pŵer i'r gosodiad wrth y torrwr cylched neu'r blwch ffiwsiau.
Prawf: Trowch y switsh golau ymlaen i gadarnhau bod y bylbiau'n gweithio'n iawn.

Nodyn: These bulbs are designed for E12 candelabra bases. Attempting to install them in incompatible sockets may cause damage or malfunction.

Cyfarwyddiadau Gweithredu

Troi Ymlaen/Diffodd

Operate the light bulb using your standard wall switch. The bulb will illuminate instantly when power is supplied.

Dimming Functionality and Warm Glow Effect

These Philips LED bulbs are fully dimmable. When used with a compatible LED dimmer switch, you can adjust the brightness level to your preference.

Warm Glow Effect: As you dim the light, the bulb's color temperature will gradually shift from a bright soft white (2700K) to a warmer, more amber tone. This mimics the behavior of traditional incandescent bulbs, creating a cozy and relaxing atmosphere.
Optimal Dimming: For best performance and to fully experience the Warm Glow effect, use a dimmer switch specifically designed for LED lighting.

Cynnal a chadw

Glanhau: Gwnewch yn siŵr bod y pŵer i ffwrdd a bod y bwlb wedi oeri cyn ei lanhau. Sychwch y bwlb gyda lliain meddal, sych. Peidiwch â defnyddio glanhawyr hylifol na sgraffiniol.
Amnewid: These LED bulbs have a long lifespan. When replacement is eventually needed, follow the same installation steps outlined in the "Setup and Installation" section.
Storio: If storing bulbs, keep them in their original packaging in a cool, dry place.

Datrys problemau

Problem	Achos Posibl	Ateb
Nid yw bwlb yn goleuo.	Dim pŵer i'r gêm. Bwlb heb ei sgriwio i mewn yn iawn. Mae nam ar fwlb.	Gwiriwch y torrwr cylched/ffiws. Gwnewch yn siŵr bod y bwlb wedi'i dynnhau'n ddiogel. Amnewidiwch gyda bylbiau newydd i brofi.
Mae'r bylbiau'n fflachio neu'n hwmio.	Switsh pylu anghydnaws. Cysylltiad rhydd. Ymyrraeth drydanol.	Replace dimmer with an LED-compatible model. Turn off power and re-tighten bulb. Consult an electrician if problem persists.
Dimming range is poor or inconsistent.	Switsh pylu anghydnaws. Minimum load requirement not met by dimmer.	Ensure dimmer is specifically designed for LED bulbs. Some dimmers require a minimum wattage; ensure enough bulbs are connected.

Manylebau

Brand	Philips
Rhif Model	556506
Math Golau	LED
Nodwedd Arbennig	Dimmable, Warm Glow Effect
Wattage (Gwirioneddol)	6.6 Wat
Cyfwerth Gwynias	75 Wat
Maint Siâp Bylbiau	BA11
Sylfaen Bylbiau	E12 (Candelabra)
Disgleirdeb	600 o Lumens
Lliw Golau	Gwyn Meddal
Tymheredd Lliw	2700 Kelvin (warms when dimmed)
Cyftage	120 Volts (100-120V, 60Hz)
Defnydd Dan Do / Awyr Agored	Dan do
Deunydd	Copr (cydrannau mewnol)
Dimensiynau Cynnyrch	1.57 x 1.38 x 4.33 modfedd
Pwysau Eitem	3.52 owns
UPC	046677556501

Gwarant a Chefnogaeth

For information regarding warranty coverage, technical support, or customer service, please refer to the official Philips website or contact Philips customer support directly. Details can typically be found on the product packaging or the manufacturer's official online resources.

Nodwch os gwelwch yn dda: Warranty terms and conditions may vary by region and retailer.

	Bwlb Festoon LED Philips Ultinon Pro7000 SI: Goleuadau Mewnol Gwell Darganfyddwch fylbiau festoon LED Philips Ultinon Pro7000 SI (LUM11860CU70X1/20) ar gyfer eich car. Gan gynnig disgleirdeb uwch (6000 K), dosbarthiad golau unffurf, a hyd oes o 5,000 awr, mae'r bylbiau hyn yn gwella diogelwch gyrru ac arddull fewnol gyda gosodiad plygio-a-chwarae hawdd.
	Llawlyfrau Defnyddiwr Goleuadau Clyfar Philips Hue: Bylbiau LED a Switsh Pylu Canllaw defnyddiwr cynhwysfawr ar gyfer Bwlb GU10 Clyfar LED Philips Hue White & Color Ambiance a Switsh Pylu Clyfar Philips Hue gyda Rheolydd o Bell, yn cwmpasu nodweddion, manylebau, a gosodiad.
	Golau Nenfwd LED Philips Acuna CL253: Cyfarwyddiadau Datgymalu ac Amnewid Ffynhonnell Golau Cyfarwyddiadau manwl ar gyfer datgymalu ac ailosod ffynhonnell golau golau nenfwd LED Philips Acuna CL253, gan gynnwys rhestr rhannau a chanllawiau cam wrth gam ar gyfer datgymalu a chydosod.
	Cynhyrchion Goleuo Clyfar Philips Hue: Switsh Deialu Tap a Llawlyfr Defnyddiwr Bwlb LED Gwyn A19 Llawlyfr defnyddiwr cynhwysfawr a gwybodaeth am gynnyrch ar gyfer dyfeisiau goleuo clyfar Philips Hue, gan gynnwys y switsh Tap deial a'r Bwlb Clyfar LED Gwyn A19. Yn manylu ar nodweddion, manylebau, gosodiad, ac opsiynau cysylltedd ar gyfer profiad goleuo cartref clyfar.
	Canllaw Gosod Gosodiad Goleuadau Awyr Agored a Bylbiau Clyfar Philips Hue Canllaw cynhwysfawr ar gyfer gosod gosodiadau goleuadau awyr agored Philips Hue a sefydlu bylbiau LED clyfar Philips Hue A19, gan gynnwys cyfarwyddiadau diogelwch, camau gosod, a system Hue drosoddviewYn cwmpasu gosod, gwifrau, gosod bylbiau, a nodweddion clyfar.
	Philips Fortimo LED SLM Design-in Guide: High-Brightness Retail Lighting Comprehensive design-in guide for Philips Fortimo LED SLM modules, detailing technical specifications, electrical and thermal design, optical considerations, and compliance for creating high-brightness, saturated retail lighting solutions.

Philips 556506