1. Cynnyrch Drosview
The Totolink N300RB is a high-performance N wireless router designed for home and small office use. It provides a stable and high-speed wireless network, ideal for online gaming, video streaming, and general internet browsing. This device integrates router, wireless access point, and 4-port switch functions into one.
Figure 1: Totolink N300RB N Wireless WiFi Router with two external antennas.
Nodweddion Dyfais:
- Porthladdoedd: 4 x 10/100 Mbps LAN interfaces, 1 x 10/100 Mbps WAN port.
- Cyflenwad Pŵer: 9V DC / 0.8A.
- Botymau: RST/WPS button for reset and Wi-Fi Protected Setup.
- Dangosyddion: LED indicators for Power, CPU, Wireless, WAN, and LAN ports.
- Dimensiynau (L x W x H): 144 x 95.4 x 25.5 mm.
- Antenâu: 2 x 8dBi external antennas.
Nodweddion Di-wifr:
- Safonau: IEEE 802.11n, IEEE 802.11g, IEEE 802.11b.
- Amlder: 2.4~2.4835GHz.
- Cyfraddau Data: Up to 300Mbps (802.11n), 54Mbps (802.11g), 11Mbps (802.11b).
- Diogelwch: 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK (TKIP/AES).
2. Canllaw Gosod
Follow these steps to set up your Totolink N300RB router for the first time.
2.1 Cysylltiad Caledwedd
- Cysylltiad Pwer: Connect the provided power adapter to the router's power port and plug it into a power outlet.
- Cysylltiad WAN: Connect one end of an Ethernet cable to your modem's LAN port and the other end to the router's WAN port (usually a different color).
- Cysylltiad LAN (Dewisol): For wired devices, connect an Ethernet cable from your computer or other network device to any of the router's LAN ports.
- Addasiad Antena: Ensure both 8dBi antennas are securely attached and oriented vertically for optimal signal strength.
2.2 Ffurfweddiad Cychwynnol
- Cysylltwch â'r Llwybrydd: Connect your computer to the router either via an Ethernet cable (to a LAN port) or wirelessly using the default Wi-Fi name (SSID) printed on the router's label.
- Mynediad Web Rhyngwyneb: Agor a web porwr a rhowch y cyfeiriad IP rhagosodedig (ee,
192.168.1.1or192.168.0.1) into the address bar. Press Enter. - Mewngofnodi: Rhowch yr enw defnyddiwr a'r cyfrinair diofyn (fel arfer
adminfor both, check the router's label if unsure). - Rhedeg Gosod Cyflym: Follow the on-screen Quick Setup Wizard to configure your internet connection type (PPPoE, DHCP, Static IP) and wireless network settings (SSID, password).
- Cadw Gosodiadau: Save your configurations and restart the router if prompted.
3. Cyfarwyddiadau Gweithredu
This section covers common operational aspects and advanced settings of your router.
3.1 Gosodiadau Di-wifr Sylfaenol
- Newid SSID: Navigate to 'Wireless' > 'Basic Settings' to change your Wi-Fi network name.
- Gosod Cyfrinair: Go to 'Wireless' > 'Security' to set a strong WPA2-PSK password for your Wi-Fi network.
- Swyddogaeth WPS: Press the RST/WPS button on the router or enable WPS via the web interface ('Wireless' > 'WPS') to quickly connect WPS-compatible devices.
3.2 Ffurfweddiad Rhwydwaith
- LAN/DHCP Settings: Configure DHCP Server settings or set up DHCP Static Lease for specific devices under 'LAN' > 'DHCP Settings'.
- Ymlaen Porthladd: Access 'Advanced Settings' > 'Port Forwarding' to open specific ports for applications or services.
- DMZ/Twin IP: Configure a DMZ host or Twin IP for a specific device to expose it to the internet, typically for gaming or specific server applications.
- QoS (Ansawdd Gwasanaeth): Manage bandwidth allocation for different applications or devices under 'Traffic Settings' > 'QoS'.
3.3 Security and Access Control
- IP/MAC Filtering: Control internet access for specific devices based on their IP or MAC addresses under 'Internet Access Control'.
- Diogelwch diwifr: Ensure WPA2-PSK (AES) encryption is enabled for the strongest wireless security.
4. cynnal
Mae cynnal a chadw rheolaidd yn sicrhau perfformiad a diogelwch gorau posibl eich llwybrydd.
- Diweddariad Cadarnwedd: Periodically check the Totolink official website for new firmware versions. Update the firmware via 'System Management' > 'Operating System Update' to enhance features and security.
- Ailgychwyn y System: Reboot the router occasionally to clear its memory and resolve minor issues. This can be done via the web interface or by unplugging and replugging the power adapter.
- Ailosod Ffatri: If you encounter persistent issues or forget your login credentials, perform a factory reset by pressing and holding the RST/WPS button for about 5-10 seconds until the LEDs flash. This will revert all settings to default.
- Glanhau Corfforol: Keep the router in a well-ventilated area and clean it regularly with a soft, dry cloth to prevent dust buildup.
5. Datrys Problemau
This section addresses common issues you might encounter with your router.
5.1 Dim Mynediad i'r Rhyngrwyd
- Gwirio Ceblau: Ensure all Ethernet cables (WAN, LAN) are securely connected.
- Statws Modem: Gwiriwch fod eich modem yn gweithio'n gywir a bod ganddo gysylltiad rhyngrwyd gweithredol.
- LEDs llwybrydd: Check the WAN LED on the router. If it's off or red, there might be an issue with the internet connection from your ISP or modem.
- Gosodiadau IP: Confirm your router's WAN settings (PPPoE, DHCP, Static IP) match your ISP's requirements.
- Ailgychwyn Dyfeisiau: Power cycle your modem, then the router, and then your connected devices.
5.2 Weak or Unstable Wi-Fi Signal
- Lleoliad Llwybrydd: Place the router in a central location, away from obstructions (thick walls, metal objects) and interference sources (microwaves, cordless phones).
- Cyfeiriadedd Antena: Ensure antennas are positioned vertically.
- Ymyrraeth Sianel: In the wireless settings, try changing the Wi-Fi channel to a less congested one (e.g., 1, 6, or 11).
- Diweddariad Cadarnwedd: Gwnewch yn siŵr bod cadarnwedd eich llwybrydd yn gyfredol.
5.3 Methu Mynediad i'r Llwybrydd Web Rhyngwyneb
- Cyfeiriad IP: Double-check that you are entering the correct IP address (e.g.,
192.168.1.1). - Cysylltiad Rhwydwaith: Gwnewch yn siŵr bod eich dyfais wedi'i chysylltu â rhwydwaith y llwybrydd (gyda gwifrau neu ddi-wifr).
- Storfa Porwr: Cliriwch storfa a chwcis eich porwr, neu rhowch gynnig ar borwr gwahanol.
- Wal Dân/Gwrthfeirws: Analluogwch dros dro unrhyw feddalwedd wal dân neu feddalwedd gwrthfeirws ar eich cyfrifiadur a allai fod yn rhwystro mynediad.
- Ailosod Ffatri: If all else fails, perform a factory reset (see Section 4) and try accessing with default credentials.
6. manylebau
| Nodwedd | Disgrifiad |
|---|---|
| Enw Model | N300RB |
| Safonau Di-wifr | IEEE 802.11n, IEEE 802.11g, IEEE 802.11b |
| Band Amlder | 2.4 GHz |
| Cyfradd Data | Hyd at 300 Mbps |
| Porthladdoedd | 4 x LAN 10/100 Mbps, 1 x WAN 10/100 Mbps |
| Antenâu | 2 x 8dBi Fixed Antennas |
| Cyflenwad Pŵer | 9V DC/0.8A |
| Botymau | RST / WPS |
| Dimensiynau (L x W x H) | 144 x 95.4 x 25.5 mm |
| Tymheredd Gweithredu | 0°C ~ 55°C (32°F ~ 131°F) |
| Tymheredd Storio | -20°C ~ 65°C (-4°F ~ 149°F) |
| Lleithder Gweithredu | 10% ~ 90% heb fod yn gyddwyso |
| Lleithder Storio | 5% ~ 95% heb fod yn gyddwyso |
| Diogelwch Di-wifr | 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK (TKIP/AES) |
| Math Modiwleiddio | DBPSK, DQPSK, CCK, OFDM (BPSK, QPSK, 16-QAM/64-QAM) |
| Dyfeisiau Cydnaws | Gliniadur, Cyfrifiadur Personol, Tabled, Ffôn Clyfar |
| System Weithredu | RouterOS (internal firmware) |
7. Gwarant a Chefnogaeth
Totolink products typically come with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging or visit the official Totolink websafle am delerau ac amodau gwarant manwl sy'n benodol i'ch rhanbarth.
For technical support, firmware downloads, and frequently asked questions, please visit the official Totolink support page. You may also contact their customer service for further assistance.
