1. Rhagymadrodd
This manual provides essential information for the proper installation, operation, and maintenance of the Notifier DVC-KD Digital Voice Command Keypad. The DVC-KD is designed to integrate with compatible Notifier fire alarm and emergency voice evacuation systems, providing a user interface for system control and status monitoring.
2. Gwybodaeth Diogelwch
Always adhere to local codes and regulations when installing and operating this device. Installation should only be performed by qualified personnel. Disconnect all power before servicing. Refer to the main system documentation for comprehensive safety guidelines.
- Sicrhewch fod pŵer wedi'i ddatgysylltu cyn gosod neu gynnal a chadw.
- Follow all applicable national and local electrical codes.
- Peidiwch â gwneud y ddyfais yn agored i leithder neu dymheredd eithafol.
- Only use Notifier-approved components and accessories.
3. Cynnwys Pecyn
Verify that all items listed below are present in your DVC-KD package:
- Notifier DVC-KD Digital Voice Command Keypad Module
- Connector Pin Headers
- Taflen Cyfarwyddiadau Gosod
- Fuses (if applicable, typically labeled 90351-B)
Figure 1: This image displays the components included with the Notifier DVC-KD. It shows the main DVC-KD module in an anti-static bag, a separate bag of connector pins, and a folded instruction sheet with diagrams for installation. A small bag labeled '90351-B' containing fuses is also visible.
Figure 2: This image shows the brown cardboard packaging box for the Notifier DVC-KD. The label on the box clearly indicates 'NOTIFIER DVC-KD RoHS' and includes a barcode with the number '0 20103 12192 1'.
4. Gosod a Gosod
The DVC-KD is designed for integration into a Notifier DVC (Digital Voice Command) system. Refer to the specific DVC system manual for detailed wiring and configuration instructions. The following steps outline the physical installation process as depicted in the included instruction sheet:
- Prepare the DVC Enclosure: Ensure the DVC enclosure is properly mounted and ready for module installation.
- Mount the DVC-KD: Secure the DVC-KD module into the designated slot within the DVC enclosure. This typically involves aligning the module with mounting standoffs and securing it with screws (not included, refer to DVC enclosure documentation for required hardware).
- Connect to the DVC Board: Fasten the connector pins (provided) to the back of the DVC-KD board. Then, connect the DVC-KD to the main DVC board using the appropriate ribbon cable or connectors. Ensure all connections are firm and correctly oriented.
For detailed electrical connections, system programming, and network configuration, consult the comprehensive Notifier DVC system installation and programming manuals.
5. Cyfarwyddiadau Gweithredu
The Notifier DVC-KD Keypad serves as a user interface for the Digital Voice Command system. Its operation is dependent on the overall system configuration and programming. Typically, the keypad allows users to:
- View system status and event messages.
- Initiate or terminate voice messages and evacuation sequences.
- Acknowledge alarms and troubleshoot system faults.
- Access various system menus and controls as programmed.
Refer to the Notifier DVC system's specific operating manual for detailed instructions on navigating menus, responding to events, and utilizing all functions of the DVC-KD keypad within your installed system.
6. cynnal
The DVC-KD Digital Voice Command Keypad requires minimal routine maintenance. Regular inspections should be part of a comprehensive fire alarm system maintenance program.
- Glanhau: Gently wipe the keypad surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Archwiliad gweledol: Periodically check for any visible damage, loose connections, or signs of wear.
- Profi System: Ensure the DVC-KD functions correctly during routine system tests as per local codes and manufacturer recommendations.
Any repairs or internal servicing should only be performed by Notifier-authorized service technicians.
7. Datrys Problemau
Should you encounter issues with your DVC-KD Keypad, consider the following general troubleshooting steps. For complex issues, consult the main DVC system manual or contact Notifier technical support.
- Dim Arddangosfa/Pŵer: Verify that the DVC system is powered on and all connections to the DVC-KD are secure. Check fuses if applicable.
- Unresponsive Keypad: Ensure the keypad is properly seated and connected. A system reset (refer to DVC system manual) may resolve temporary issues.
- Negeseuon Gwall: Note any error codes or messages displayed on the keypad and refer to the DVC system manual's troubleshooting section for specific remedies.
Do not attempt to repair internal components yourself. Contact qualified service personnel.
8. manylebau
| Nodwedd | Manylyn |
|---|---|
| Brand | Hysbyswr |
| Rhif Model | DVC KD |
| Rhif Rhan | NDVC-KD |
| UPC | 643485653561 (also 020103121921 from packaging) |
| Gwneuthurwr | HYSBYSYDD |
| Arddull | Diogelwch |
| Ffynhonnell Pwer | Battery Powered (Note: Typically powered by main DVC system, may refer to backup or specific component) |
| Pwysau Eitem | 2 Bunt |
| Math o Larwm | Audible (Refers to system capability, not necessarily the keypad itself) |
| Dyddiad Ar Gael Cyntaf | Chwefror 9, 2016 |
9. Gwarant a Chefnogaeth
For information regarding the warranty of your Notifier DVC-KD Digital Voice Command Keypad, please refer to the warranty documentation provided with your complete Notifier fire alarm system or contact Notifier directly. Technical support is available through authorized Notifier distributors and service centers.
Visit the official Notifier website for the latest product information, documentation, and support contacts.
