cudy-LOGO

cudy RE3000 AX3000 WiFi 6 Mesh Repeater

cudy-RE3000-AX3000-WiFi-6-Mesh-Repeater-PRODUCT

Product Information

Specifications

  • Model Number: 810600194
  • Supported Languages: English, Italiano, Magyar, Deutsch, Eesti, Norsk, Svenska, Ting Vit, Cestina, Suomi, Hrvatski, Dansk, Lietuvi kalba

Product Usage Instructions

Step 1: Plug in the Extender
Plug the extender into the socket near your router and wait for it to boot up.

Step 2: Pair with Your Router

  • Method A: Press the WPS buttons on your router and then on the extender. Wait for the LED to light up.
  • Method B: Connect your computer or phone to the extender’s Wi-Fi and set it up in your browser by following the steps shown in the pictures.

Frequently Asked Questions (FAQ)

  • Q: How do I know if the extender is properly paired with my router?
    A: When the LED on the extender lights up after following either Method A or B, it indicates a successful pairing.
  • Q: What should I do if the LED does not light up after pairing?
    A: In such cases, ensure that the extender is correctly plugged in and try the pairing process again.
  • Q: Can I change the Wi-Fi network name of the extender?
    A: Yes, you can typically change the Wi-Fi network name and password of the extender through its browser-based setup interface.

Quick Installation Guide

NEED TECH HELP?

cudy-RE3000-AX3000-WiFi-6-Mesh-Repeater- (1)

INSTALLATION

  1. Plug the extender into the socket near your router and wait for it to boot up.
  2. Pair the extender with your router using method A or B.
    A Press the WPS buttons on your router and then the extender, and wait for the LEDcudy-RE3000-AX3000-WiFi-6-Mesh-Repeater-03 to light up.
    B Connect your computer or phone to the extender’s Wi-Fi and set it up in your browser.
    Follow the steps shown in the pictures. cudy-RE3000-AX3000-WiFi-6-Mesh-Repeater- (2) cudy-RE3000-AX3000-WiFi-6-Mesh-Repeater- (3) cudy-RE3000-AX3000-WiFi-6-Mesh-Repeater- (4) cudy-RE3000-AX3000-WiFi-6-Mesh-Repeater- (5) cudy-RE3000-AX3000-WiFi-6-Mesh-Repeater- (6)
  3. Connect your device to the extended Wi-Fi and try accessing the Internet. By default, the password for the extended network will be the same as the original network.cudy-RE3000-AX3000-WiFi-6-Mesh-Repeater- (8)cudy-RE3000-AX3000-WiFi-6-Mesh-Repeater- (9)Note: If you paired the extender with a “Cudy Mesh” device by pressing the WPS buttons, the Wi-Fi name will be the same as the original Wi-Fi.
  4. Relocate the extender between the Wi-Fi coverage area and the area where you want to expand the Wi-Fi signal. cudy-RE3000-AX3000-WiFi-6-Mesh-Repeater- (7) cudy-RE3000-AX3000-WiFi-6-Mesh-Repeater- (10)

Documents / Resources

cudy RE3000 AX3000 WiFi 6 Mesh Repeater [pdf] Installation Guide
RE3000 AX3000 WiFi 6 Mesh Repeater, RE3000, AX3000 WiFi 6 Mesh Repeater, WiFi 6 Mesh Repeater, 6 Mesh Repeater, Mesh Repeater, Repeater

References

Leave a comment

Your email address will not be published. Required fields are marked *