cudy PE10 Gigabit PCI-E Ethernet Adapter Installation Guide
Quick Installation
- Unplug power cable and remove case panel.
- Insert the adapter into an available PCI-E slot and secure it with the provided screw
- Assemble the case panel and power on your computer
- Plug the ethernet cable and connect to your router or switch.
- Check if the computer is connected to the network.
If yes, enjoy the Internet directly;If not, download and install the driver by scanning the QR code or enter https://www.cudy.com/pe10 in your browser.
- Note:
If the adapter is not detected:
1. Check the insertion.
2. Try another slot.
3. Contact support@cudy.com
Read More About This Manual & Download PDF:
Documents / Resources
 |
cudy PE10 Gigabit PCI-E Ethernet Adapter [pdf] Installation Guide PE10 2.0, PE10 Gigabit PCI-E Ethernet Adapter, PE10, Gigabit PCI-E Ethernet Adapter, PCI-E Ethernet Adapter, Ethernet Adapter, Adapter |