Quick Installation Guide
Unmanaged Switch
FS108D 8 Port 10 and 100 Mbps Desktop Switch
Note: The image may differ from the actual product.
Connect an unmanaged switch
- Power Supply
- Client Devices
- Network Switch
- Router
If an “Extend” DIP switch is available, you may turn it on to improve the transmission distance to 250 meters, and the data speed will be capped at 10 Mbps. The affected port number is printed near the DIP switch when not all ports are affected.
If a “VLAN” DIP switch is available, you may turn it on to prevent the downstream clients from communicating with each other and improve security. The affected port number is printed near the DIP switch.
If a grounding point is available, you may connect it to the ground to enhance electrical safety.
EU declaration of conformity
Cudy hereby declares that this device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC and 2011/65/EU.
The original EU declaration of conformity may be found at http://www.cudy.com/ce.
NEED TECH HELP?
810600239
www.cudy.com
support@cudy.com
Documents / Resources
 |
cudy FS108D 8 Port 10 and 100 Mbps Desktop Switch [pdf] Installation Guide FS108D 8 Port 10 and 100 Mbps Desktop Switch, FS108D, 8 Port 10 and 100 Mbps Desktop Switch, 100 Mbps Desktop Switch, Mbps Desktop Switch, Desktop Switch |