Cubot T9 Clip-on Wireless Headset User Manual

Accessories list

Includes earbuds*2, charging case, Type-C charging cable, and instruction manual

Specifications

• Earphone:Model： T9
• Wireless version:5.4
• distance:≥10m
• Music time: About 4.5 hours
• Charging case: Voltage current:5VV 1A
• Charging time: About 2H
• Interface: Type-C
• Battery:400mAh

Touch key operation

Headset pairing

How to use the first pairing

Power on/off

1. If it is not connected, press and hold the left/right touch button for 5 seconds to turnThethe device, and after hearing the prompt tone, the green light will stay on for 1 second, and English the white and green lights will flash alternately.
2. Turn on the device for 3 minutes, automatically turn off when no device is connected, or put the earbuds into the charging compartment (touch manual power off is not supported)

Single ear connection

1. Take out only one of the earbuds from the charging case
2. Turn on the Bluetooth of the mobile phone, search for “T9”, and click to pair and connect
3. The connection is successful, a tone will be heard.

Binaural connection

1. Open the lid of the charging case or take out two earphones, and automatically enter TWS pairing. After pairing, the main light flashes, and the secondary light turns off (indicating.
2. The arch status, turn on the mobile phone or other Bluetooth device connection.
3. Turn on your phone or other Bluetooth device, search for “T9”, and click on the phone to pair and connec.t
4. Support connecting two mobile phones at the same time (need to connect theonce first, otherwise, when one of the mobile phones is connected, the other cannot search for the Bluetooth name)

Automatic reconnection
When powered on, it will automatically reconnect with the paired phone (the premise is thatThee the Bluetooth of the mobile phone does not clear the pairing record with this device.

Note items

After connection, if there is no sound from the earphones:, please turn off the Bluetooth, put the two earphones back into the charging case, and then take them out to turn them on; When pairing, the earbuds flash alternately with white and green lights; When there is no connection record/the connection is successful, the main light flashes, and the secondary light turns off Charging instructions According to the indicator light, Type-C charging cable, charge the charging case in time.

Charge the headphones
Put the earbuds into the charging case, the white ones light is always on, the LED of the charging case is flashing, and the light is off when it is fully charged.

Charge the charging case.
The white LED flashes slowly and increases, and all LEDs are always on when fully charged (LEDs correspond to 100% battery, 1 LED = 25% battery)

If the earbuds won’t charge, wipe and dry the charging contacts.

Safety Information

Please read and observe the following before use to avoid dangerous or illegal situations

• Toprevent possible hearing damage, do not use this product with a high pitch for a long time.
• Please use the product charging cable to charge. If you use a power adapter for charging, you should meet the requirements of safety standards or obtain a CCC-certified power adapter.
• Do not disassemble, hit, crush, or throw into fire, which may cause an explosion.
• Contains a non-removable car battery; do not replace the battery by yourself to avoid damage to the battery or the device.
• The battery can only be replaced by an authorized service center, and the battery of the same model must be replaced. Do not use if the battery is severely swollen.
• Do not dispose of the battery in a fire or high-temperature oven, or mechanically run or cut the battery, which may cause the battery to explode.
• Do not expose the battery to excessive heat, which may cause the battery to catch fire or explode.
• Do not throw old batteries into household garbage, and dispose of this equipment and waste batteries according to local laws and regulations.
• This product is not a toy and contains small parts that may cause choking or other injury to children, so keep it out of reach of children.
• If you experience symptoms such as redness and swelling on the skin, discontinue use immediately and consult a doctor.

Download PDF: Cubot T9 Clip-on Wireless Headset User Manual

References

• User Manual