CTA PAD-PARAMULTI Triple Screen Adjustable Kiosk with Universal Security Enclosure Instruction Manual
INSTRUCTION – MANUAL
CONTENTS:
INSTALLATION:
1. Setting up Base to Body
1A. Align base (B) to body (A) as shown. From below, rotate in (4) screws (G) and washers (H) as shown using provided tool (D) until securely tightened.
2. Adjusting Height
2A. Loosen the side bolt using provided tool (D) to raise or lower to height to your preference.
Rotate opposite direction to securely tighten and set your height.
3. Setup Configuration
3A. Identify the top VESA plate, Tilt it down for a 2-direction setup or keep it up for a 1-direction setup as required.
4. Setting up
Tablet Enclosures
4A. Identify the (3) VESA locations. Align enclosures VESA holes (I) with the body VESA holes (A). Then using the screw and hex nuts (E & F),screw in from the front using provided tool (C) while holding the hex nuts from behind until securely tightened. Repeat for all other
VESA locations with enclosures.
5. Setting Up Foam Adapters
6. Setting Up Sheet Adapter
7. Setting Up Enclosure Openings
8. Enclosure Security
Read More About This Manual & Download PDF:
Documents / Resources
 |
CTA PAD-PARAMULTI Triple Screen Adjustable Kiosk with Universal Security Enclosure [pdf] Instruction Manual PAD-PARAMULTI, Triple Screen Adjustable Kiosk with Universal Security Enclosure, PAD-PARAMULTI Triple Screen Adjustable Kiosk with Universal Security Enclosure, PAD-PARAMULTI Triple Screen Adjustable Kiosk, Triple Screen Adjustable Kiosk, Adjustable Kiosk, Kiosk |
