CR-10 Smart
Create reality achieve dreams
CR-10 Smart
3D Printer User Manual
Dear Consumers,
Thank you for choosing our products.For the best experience,please read the instructions before operating the Printer. Our teams wiss always be ready to render you the best services. Please contact us via the phone number or e-mail address provided at the end when you encounter any problem with the Printer.
For a better experience in using our product, you can also learn how to use the printer in the following ways: View the accompanying instructions and videos in the TF Card.
Visit our official website www.creality.com to find relevant software/hardware information, contact details and operation and maintenance instructions.
Firmware Upgrade
Please login the official website https://www.creality.com/download, switch the language and select the relevant printer and model and download the required firmware, you can use it after the installation is finished.
NOTES
- Do not use the printer any way other than described herein in order to avoid personal injury or property damage.
- Do not place the printer near any heat source or flammable or explosive objects. We suggest placing it in a well-ventilated, low-dust environment.
- Do not expose the printer to violent vibration or any unstable environment, as this may cause poor print quality.
- Please use recommended resin to in case damage of machine.
- Do not use any other power cable except the one supplied. Always use a grounded three-prong power outlet.
- Please do not open the plastic cover during usage, otherwise the printing will be interrupted.
- Do not wear cotton gloves when operating the printer. Such cloths may become tangled in the printers moving parts leading to burns, possible bodily injury, or printer damage.
- Please wait a moment after the print is finished. And please wear gloves to take out the print by tools.
- Clean the printer frequently. Always turn the power off when cleaning, and wipe with a dry cloth to remove dust, adhered printing plastics or any other material off the frame, guide rails, or wheels. Use glass cleaner or isopropyl alcohol to clean the print surface.
- Children under 10 years should not use the printer without supervision.
- This machine is equipped with a security protection mechanism. Do not manually move the nozzle and printing platform mechanism manually while booting up, otherwise the device will automatically power off for safety.
- Users shallcomply with related nation and region’s laws, regulations and ethical codes where the equipment or regional laws, regulations and ethical codes where herein
refeffed product and produced prints by it is located.
Introduction
| 1 X Limit Switch 2 Spotlight 3 Nozzle Kit 4 Z-axis photoelectric switch 5 Printing Platform 6 Feeding holder components 7 Y-axis belt adjusting knob 8 Tool Box 9 SD Card Slot SD 10 LCD Screen 11 Network Interface |
12 Switch control 13 X-axis belt adjusting knob 14 Pull rod 15 Screw 16 Coupling 17 Z-axis motor (Z1) 18 Power outlet 19 Y-axis Motor 20 X-axis Motor 21 Filament Detector 22 Extruder Motor |
Equipment parameters
|
Basic Parameters 421K*3Y |
|
| Model | CR-10 Smart |
| Printing Size | 300’300’400mm |
| Molding Tech | FDM |
| Nozzle Number | 1 |
| Slice Thickness | 0.1mm-0.4mm |
| Nozzle Diameter | Standard 0.4mm |
| Precision | ±0.1mm |
| Filament | 1.75mm PLA/ABS/TPU/PETG/Wood |
| File Format | STL/OBJ/AMF |
| File Transfer | USB/Storage card |
| Slice Software – Vic | Creality Slicer/Cura/Repetier-Host/Simpl ify3D |
| Power Supply | Inputs A:AC100-240V 50/60Hz Output’Nth:DC 24V |
| Total Power | 350W |
| Bed Temp | <100°C |
| Nozzle Temp | <260°C |
| Resume Printing | Yes I |
| Filament Detector | Yes i M |
| Dual Z-axis | Yes I ti, |
| Auto-Leveling | Yes I |
| Language | English |
| Printing Speed | 80-100mm/s |
Package Content
Tips: the above accessories are for reference only, please refer to the physical accessories!
Install the Gantry Frame
Pull Rod Installation
Adjust the proper length of assembled pull rod and install in the position shown in the figure
10 M5×12 Hexagon flat round head screw x2
11 M5x20 Hexagon flat round head screws x2
Install the Rack
Install Limit switch for Z-axis
Easier to replace the platform and adjust the belt
Rotate the glass pick-and-place handle plate for platform replacement.- Then manually turn the knob to the appropriate tightness to avoid belt breakage. (as shown in figure A, three places)
Cable Connection
Cable Connection
- Connect the 15pin port to the nozzle adapter board as shown in the figure 15pin
- Connect Z-axis motor cable
- Connect the photoelectric switch wire
- Connect the power cord
Bed Leveling
- Slelct“Level”to automatically level
- After the leveling is completed,adjust the Z-axis compensation value according to the adhesion of the printing consumables and the glass
During the leveling process,please do not touch the Teflon tube and nozzle cable.
Preheating Method
Notes: The UI information is only for reference,the actual UI may be different.
Preheating Method
Notes: The print preheating standard is adjusted at the factory, PLA preheating standard: nozzle temperature 200 °, hot bed temperature 60 °, ABS preheating standard: nozzle temperature 240 °, hot bed temperature 70 °.If you need to adjust it due to printing materials or other reasons, you can adjust the parameters on the interface home page control → temperature → PLA / ABS preheat setting.
Load Filament
When you wait for the temperature to rise,hang the filament over the Filament Holder.
Load Filament
Whe the current temperature reaches the target temperature,the consumables pass the material breakage detection,and are inserted into the small hole of the extruder until the position of the nozzle,If the consumables flow out at the nozzle,it means that the consumables have been loaded. Method of adjusting the tightness of the extrusion spring:Arrow to right is tightening,arrow to left is lossen.(As shown in figure A)
Tips: How to replace the filament?
- Cutting filament near the Extruder and slowly feed new filament until they are fed into the new filament.
- Withdrawing the filament quickly and feeding the new filament after nozzle was preheated and filament pushed a little forward.
WiFi Printing
12. WiFi Printing
Notes: The UI information is only for reference,the actual UI may be different.
Start Printing
13. Start Printing
 |
|
| 5. Generate G-code and save the gcode file to storage card. | 6.Insert the storage card→ Click print control→ Select the file to be printed. |
File names must be Latin letters or numbers, not Chinese characters or other special symbols
Notes: For details on the software instructions, please refer to the slicing software manual in the memory card!
Warning: Please don’t insert or remove TF card or SD card during printing.
13. Start Printing 
Circuit Wiring
Trouble-shooting
FDM 3D PRINTING FILAMENTS
 |
|||
| Upgraded environmentally friendly formula, matte effect, high toughness, and fine printing. The raw materials are imported from the United States, besides, there are rich colors for customers to choose. |
Targeting at mid-end users, CR series is with transparent tray plus black-white color box design. lts slight tolerance in wire diameter contributes to stable printing quality. CR series meets your demands of daily design and prototype making. |
HC series is cost-efficient. It’s widely applicable to general FDM printer product designs on the market to meet your daily design and different prototyping needs. |
Ender series is widely applied to general FDM printer design, which meet customers’ needs of daily design and different prototyping needs. |
3D PRINTER UV SENSITIVE RESIN
Standard Resin
Low shrinkage, fast printing speed, amlost odorless, and it’s equipped with rigidity and toughness, suitable for printing common product prototypes and display models,
that’s also highly compatible with LCD printers.
Low Odor Resin
Low odor, high precision, detail textures are very expressive. Good fluidity, high printing success rate. Rich colors, to meet the customer’s color needs, preferred for
animation manual, craft furnishing industry, etc..
ABS Like Resin
With high hardness, high toughness of physical properties and strong impact resistance, it can be directly drilled on the finished models, mainly used in industrial prototype and other fields.
Dental Cast Resin
Low shrinkage, due to the low shrinkage characteristics, the size is more accurate. It’s not easy to deform under pressure after molding. Used for making porcelain teeth.
Elastic Resin Elastic Resin features good elasticity after high-strength extruding or stretching, widely applied to damping and contacting surfaces, etc., preferred to be used by
people full of originality and ideas in design.
Water Washable Resin
The model can be washed with water directly, and it’s safe, environmentally friendly, with high surface accuracy, short cleaning time and low material cost.
Water Washable Resin is currently one of the favorite new materials for schools, educational institutions and printing enthusiasts.
Dental Mode Resin
The surface hardness is extremely high, scratch-resistant, and has low shrinkage characteristics. It is mainly used in dental implant restoration and invisible braces printing in medical dentistry.
Toughness Resin
Toughness Resin is a medium-hard, wear-resistant, and repeatedly stretchable material. It is used in parts which need to be repeatedly stretched in friction devices.
High-Temperature Resin
High-Temperature Resin is mainly used in making high temperature rubber molds, which can withstand temperatures of about 200℃ without cracking and maintain
good strength, stiffness and thermal stability.
Jewelry Cast Resin
Widely applied to jewelry industry. Excellent combustion performance, low expansion coefficient, combustion without residue. Forming process is stable without
deformation. The finished product has smooth surface and high precision.
UV sensitive resin parameter information
| Related Parameters |
Standard Resin | ABS Like Resin | Dental Cast Resin | Elastic Resin | Water Washable Resin |
Dental Mode Resin |
Toughness Resin | High Temperaturein | Jewelry Cast Resin |
| Viscosity | 150-250MPa – s (NDJ-85 Rotational Viscometer (25%9 |
200-350MPa-s (NDJ-8S Rotational Viscometer (25t)) |
50-170MPa • s (NDJ-SS Rotational Viscometer (25°C)) | 300-1000MPa • s (NDJ-SS Rotational Viscometer (25°C)) | 100-350MPa – s (NDJ-SS Rotational Viscometer (25t)) |
150-300MPa • s (NDJ-85 Rotational Viscometer (25X)) |
150-300MPa • s (NDJ-8S Rotational Viscometer (25t)) |
150-300MPa • s (NDJ-SS Rotational Viscometer (25°C)) |
100-150MPa • s (NDJ-8S Rotational Viscometer (25X)) |
| Absorption Band | 355nm–410nm | 355nm-410nm | 355nm-410nm | 385nm-410nm | 385nm-410nm | 355nm-410nm | 355nm-410nm | 355nm-410nm | 355nm-410nm |
| Liquid Density | 1.05-1.25g/cm’ (Density meter (25’C)) |
1.05-1.13g/cm3 (Density meter (25’C)) |
1.05-1.25g/crn3 (Density meter (25%9 |
1.05-L25g/cm3 (Density meter pro) |
1.05-L25g/cm3 (Density meter (25°C)) |
L05-1.25g/cm’ (Density meter (25t)) |
1.05-1.25g/cm) (Density meter (25t)) |
1.05-1.25g/cm3 (Density meter (25t)) |
1.05-1.13g/cm3 (Density meter (25t)) |
| Flexural Modulus | 1.882-2.385Mpa | 1.192-2.525Mpa | 1.192-2.525MPa | 1.882-2.385Mpa | 1.882-2.385Mpa | 1.882-2.385Mpa | 1.882-2.385Mpa | 1.882-2.385Mpa | 1.192-2.525Mpa |
| Bending Strength | 59-70MPa | 68-80MPa | 49-58MPa | 40-70MPa | 40-70MPa | 59-70MPa | 40-70MPa | 59-70MPa | 49-58MPa |
| Heat Distortion Temperature |
80°C | 80°C | 75°C | 80°C | 80°C | 80°C | 80°C | 220°C | 65°C |
| Thermal Expansion Coefficient |
95*E-6 | 95*E-6 | 95°E-6 | 95°E-6 | 95’E-6 | 95*E-6 | 95*E-6 | 95’E-6 | 95*E-6 |
| Volume Shrinkage | 3.72-4.24% | 3.72-4.24% | 1.88-2.45% | 3.72-4.24% | 3.72-4.24% | 1.56-1.95% | 3.72-4.24% | 3.72-4.24% | 4.06-5.08% |
| Linear Shrinkage | 1.05-1.35% | 1.05-1.35% | 0.8-1% | 1.05-1.35% | 1.05-1.35% | 0.85-1.05% | 1.05-1.35% | 1.05-1.35% | 1.05-1.35% |
| Tensile Strength | 36-52MPa | 42-62MPa | 42-62Mpa | 30-52MPa | 30-52MPa | 42-62MPa | 30-52MPa | 36-52MPa | 42-62MPa |
| Tensile Modulus | 1.779-2.385MPa | 1.86-2.645MPa | 1.86-2.645MPa | 1.779-2.385MPa | 1.779-2.385MPa | 1.779-2.385MPa | 1.779-2.385MPa | 1.779-2.385MPa | 1.86-2.645MPa |
| Elongation at Break |
11%-20% | 11%-21% | 1146-20% | 200% | 120% | 1196-20% | 130% | 11%-20% | 1196-20% |
| Shore Hardness | MD | 75-80D | 80-88D | 20-30D | 80-85D | 82D | 65-75D | 86D | 65D |
| Glass Transition Temperature |
100°C | 100°C | 78°C | 100°C | 100°C | 100°C | 100°C | 100°C | 78°C |
| Solid Density | 1.05-1.25g/cm3 | 1.05-1.13g/cm3 | 1.05-1.13g/cm3 | 1.05-1.25g/cm3 | 1.05-1.25g/cm3 | 1.05-1.25g/cm3 | 1.05-1.25g/cm3 | 1.05-1.25g/cm3 | 1.05-1.13g/cm3 |
| Notched Impact Strength |
44-49J/m2 | 60-80J/m3 | 44-49J/m2 | 41-48J/m2 | 41-48J/m2 | 41-49J/m2 | 41-48J/m2 | 44-49J/m2 | 44-49Jm2 |
Filaments Parameter Information
| Material | Print Temp (°C) | Bed Temp (°C) | Difficulty | Flexibility | Shrinkage | Ductility | Applicable Models | |
| PLA Series | HP-PLA | 190-220 | 50-60 | • | •• | • | ••• | Suitable for 99% FDM models |
| HP-PLAx3 | 190-220 | 50-60 | • | •• | • | ••• | Suitable for 99% FDM models | |
| CR-PLA | 190-220 | 50-60 | • | •• | • | ••• | Suitable for 99% FDM models | |
| HC/EN-PLA | 190-220 | 50-60 | • | •• | • | •• | Suitable for 99% FDM models | |
| ABS | 220-260 | 90-110 | •• •• | •• | ••• | ••• | Hot bed is needed, and Creality printer enclosure is recommended for DIY machine |
|
| PETG | 230-250 | 60-100 | ••• | •• | •• | ••• | Hot bed is needed, and Creaky printer enclosure is recommended for DIY machine |
|
| TPU | 210-240 | 50 | •• | ••••• | • | •••• | Direct extrusion models | |
| Silk | 190-220 | 50-60 | • | •• | • | •• | Suitable for 99% FDM models | |
| Nylon | 230-260 | 80-90 | •••• • | ••• | ••• • | •••• | Hot bed is needed, and Creaky printer enclosure is recommended for DIY machine |
|
| Carbon (Ordinary type) |
190-220 | 50-60 | • | • | • | •• | Suitable for 99% FDM models | |
| PDS Advertising word filament-PIA |
190-220 | 50-60 | • | •• | • | •• | Creality K5, K8, T5 | |
| Low temperature f itament-PCL | 60-100 | – | • | ••• | • | •••• | Low temperature 3D printing pen | |
 |
 |
| https://model-admin.creality.com/download.html | http://qr21.cn/DgbPVQ |
SHENZHEN CREALITY 3D TECHNOLOGY CO., LTD.
Add:18F, JinXiuHongDu Building, Meilong Blvd, Longhua Dist., Shenzhen, China 518131
Official Website: www.creality.com
Tel: +86 775-8523 4565
E-mail: info@creality.com
www.creality.com
vip.creality.com
After-Sales Service Card
Hotline:+86 755-85234565
https://share.crealitygroup.com/creality-cloud/qrcode-page
Warranty Policy
- 1—year Limited Warranty since the date of product purchase.
- 6—months Limited Part Warranty for UV light.
- 3—months Limited Part Warranty for 2K Screen.
- No Warranty for the Release Film and Product Gift (U disk, Gloves, Screwdriver, Paper funnel, Brush, etc.)
What Is Covered? 4-
Any defects in material, or workmanship of the product will be covered until you provide any relating documents and information, including but not limited to: - User of the product are in the country of purchase
- Defective product is a CREALITY product
- Proof of Purchase
What Is Not Covered?
CREALITY does not guarantee the service as a result of:
- The proof of purchase being altered or made illegible.
- The product label or serial number on the product being altered or made illegible.
- Normal wear of accessories or consumables for use as release film.
- Malfunction or damage caused by personal retrofitting, or improper installation and usage.
- Malfunction or damage caused by use in non—recommended working environments.
- Malfunction or damage caused by overuse (overload) or wrong maintenance (damp, mildew, etc.)
- Malfunction or damage caused by Force Majeure (fire hazard, earthquake, lightning and floods, etc.)
- Malfunction or damage caused by the use of other brand parts or consumables.
Technical Support
Please enjoy our technical support of the whole lifetime (Except for technical problem beyond the product itself) after purchasing the product while product documents as user manual attached in U disk for instruction.
Please provide the product Serial Number when apply for technical support.
Kindly Notification
Please read the user manual and warranty card carefully before the use. For any service, Please priorly contact local seller or contact us via I I , for support.
WARRANTY
Before returning the product and filling in a warranty, please contact after-sale person for going through after-sale formality. And attach this waranty card along with the returned machine.
Repair Change Return
Name: …………….Telephone: ……………………
Address:…………..
Serial Number:……………… Order Number: ……………………Channel:
Platform
Note: The client need to fill in basic info. and return reasons. Repair records shall retain for technicians.
❑ Offline ❑ Date of purchase Day Mon. Year
Malfunction And Damage Depiction Or Return And Change Reasons\ Suggestions:
Repair Records:…………..
Due to the differences between different machine models, the physical objects and the final images can differ.
The final explanation rights shall be reserved by Shenzhen Creality 3D Technology Co., Ltd.
https://qr.creality.com
Scan To Learn More
SHENZHEN CREALITY 3D TECHNOLOGY CO., LTD. Add:18F,JinXiuHongDu Building, Meilong Blvd., Longhua Dist., Shenzhen, China 518131 Official Website: www.creality.com Tel: +86 755-8523 4565 E-mail: Infoecreallty.com csecreality.com
0.aNna: www.cxsw3d.com MA,lad: 400 6133 882 0755-8523 4565 
Documents / Resources
 |
CREALITY CR-10 Smart 3D Printer [pdf] User Manual CR-10 Smart 3D Printer, CR-10, Smart 3D Printer |
 |
CREALITY CR-10 Smart 3D Printer [pdf] User Manual CR-10 Smart 3D Printer, CR-10, Smart 3D Printer, 3D Printer |
