CREALITY CR-10 Smart 3D Printer User Manual

User Manual for CREALITY models including: CR-10 Smart 3D Printer, CR-10, Smart 3D Printer

3008010357-CR-10 Smart-说明书-中英文-转曲-材质：157g 铜版纸双面彩印-尺寸：210×140mm-V1.0-20210329

Bedienungsanleitung 2544039 Creality CR-10 Smart 3D Drucker.

Conrad e-B2B on-line (SLO) - Trgovina za podjetja!

User contributions for Admin - [[:Template:SainSmart Wiki]]

File Info : application/pdf, 40 Pages, 66.48MB

English CR-10 Smart User Manual V1.0

Create realityachieve dreams
CR-10 Smart
CR-10 Smart
3D Printer User Manual
3D
V1.0

Dear Consumers, Thank you for choosing our products.For the best experience,please read the instructions before operating the Printer. Our teams wiss always be ready to render you the best services. Please contact us via the phone number or e-mail address provided at the end when you encounter any problem with the Printer. For a better experience in using our product, you can also learn how to use the printer in the following ways: View the accompanied instructions and videos in the TF Card. Visit our official website www.creality.com to find relevant software/hardware information,contact details and operation and maintenance instructions.
TF (www.cxsw3d.com)
Firmware Upgrade Please login the official website https://www.creality.com/download, switch the language and select the relevant printer and model and download the required firmware, you can use it after the installation is finished.
https://www.creality.com/download

NOTES
1 Do not use the printer any way other than described herein in order to avoid personal injury or property damage. 2 Do not place the printer near any heat source or flammable or explosive objects. We suggest placing it in a well-ventilated, low-dust environment. 3 Do not expose the printer to violent vibration or any unstable environment, as this may cause poor print quality. 4 Please use recommended resin to in case damage of machine. 5 Do not use any other power cable except the one supplied. Always use a grounded three-prong power outlet. 6 Please do not open the plastic cover during usage, otherwise the printing will be interrupted. 7 Do not wear cotton gloves when operating the printer. Such cloths may become tangled in the printers moving parts leading to burns, possible bodily injury, or printer damage. 8 Please wait a moment after the print is finished. And please wear gloves to take out the print by tools. 9 Clean the printer frequently. Always turn the power off when cleaning, and wipe with a dry cloth to remove dust, adhered printing plastics or any other material off the frame,
guide rails, or wheels. Use glass cleaner or isopropyl alcohol to clean the print surface. 10 Children under 10 years should not use the printer without supervision. 11 This machine is equipped with a security protection mechanism. Do not manually move the nozzle and printing platform mechanism manually while booting
up, otherwise the device will automatically power off for safety. 12 Users shallcomply with related nation and region's laws, regulations and ethical codes where the equipment or regional laws, regulations and ethical codes where herein
refeffed product and produced prints by it is located.
1 ; 2 ; 3 ; 4 ; 5 ; 6 ; 7 ; 8 ; 9 ; 10 10; 11 ; 12

Contents
Introduction Parameters Parts List Assemble the 3D Printer 3D Use the 3D Printer 3D Wifi Printing Wifi Start Printing Wiring Connection Troubleshooting FDM 3D PRINTING FILAMENTS 3D Warranty Card

01-01 02-02 03-03 04-08 09-13 14-16 17-19 20-20 21-22 23-28 29-31

1. Introduction

2 6
5

1 3
4

7 8
9

14 15
13
16 17
12 18 11 10

22 21 20
19

1 X Limit Switch X 2 Spotlight 3 Nozzle Kit
4 Z-axis photoelectric switch Z
5 Printing Platform
6 Feeding holder components
7 Y-axis belt adjusting knob Y

8 Tool Box 9 SD Card Slot SD 10 LCD Screen 11 Network Interface 12 Switch control
13 X-axis belt adjusting knob X
14 Pull rod 15 Screw 16 Coupling

17 Z-axis motor (Z1) Z 18 Power outlet 19 Y-axis Motor Y 20 X-axis Motor X 21 Filament Detector 22 Extruder Motor

2. Equipment parameters

3. Package Content

1 Base Frame x 1 2 Gantry Frame x 1 3 Display x 1 4 Power Cord x 1 5 Rack x 1 6 Spool x 1

7 Filament x 1

8 Pull rods x 2

M5x10 Hexagon flat round 12 head screws x2
M5x10

13 M6 Screw bolt x2 M6

9 M5x45 Sems Screw ×4 M5x45

M5×12 Hexagon flat round head screw x2

M5x12

M5x20 Hexagon flat round head screws x2

M5x20

14 M6 Union bolts ×4 M6

15 M4T Nut ×2 M4T

Spade x 1 16

20 Diagonal Pliers x 1

Quick Release Claw x 2

17 Wrench x 1
21 Allen wrench x 1
Nozzles x 2 25

18 Socker Spanner x 1
22 Storage Card & x 1 Card Reader

Tips: the above accessories are for reference only, please refer to the physical accessories! 03

19 Nozzle Cleaner x 1
23 Quick Connect Buckles x 2

4. Install the Gantry Frame

1 Base Frame x 1 2

1 2 Gantry Frame x 1
9 M5x45 Sems Screw ×4 M5x45

Two Z-axis profiles, installed on the

inner step of the Y-axis bottom profile.

Twist the coupling to raise the X axis to the position as picture shown. X

5. Pull Rod Installation
Adjust the proper length of assembled pull rod and install in the position shown in the figure

M5×12 Hexagon flat round head screw x2

M5x12

M5x20 Hexagon flat round head screws x2

M5x20

6. Install the Rack

5 Rack x 1

6 Spool x 1

M5x10 Hexagon flat round head screws x2

M5x10

6 5

12 15
Y-axis bottom profile Y

15 M4T Nut ×2 M4T

The material rack can be installed in different positions on the front and back of the Z axis, and can be folded. Z

7. Install Limit switch for Z axis Z
Easier to replace the platform and adjust the belt
1.Rotate the glass pick-and-place handleplate for platform replacement. 1. 2.Then manually turn the knob to the appropriate tightness to avoid belt breakage. (as shown in figure A, three places) 2. A
07

A A

8. Cable Connection
Cable Connection
1 Connect the 15pin port to the nozzle adapter board as shown in the figure 15pin 2 Connect Z-axis motor cable Z 3 Connect the photoelectric switch wire 4 Connect the power cord
Caution
Do not connect or disconnect the cables when the machine is powered on.

4 Power Cord x 1
Z2

3 1

Z1
2

Cable buckle

4
4 08

9. Bed Leveling
1. Slelct"Level"to automatically level
2. After the leveling is completed,adjust the Z-axis compensation value according to the adhesion of the printing consumables and the glass Z

During the leveling process,please do not touch the Teflon tube and nozzle cable.
09

10. Preheating Method

Method 1

>> >>

Notes: The UI information is only for reference,the actual UI may be different. UI
10

10. Preheating Method
Method 2

Notes: The print preheating standard is adjusted at the factory, PLA preheating standard: nozzle temperature 200 °, hot bed temperature 60 °, ABS preheating standard: nozzle temperature 240 °, hot bed temperature 70 °.If you need to adjust it due to printing materials or other reasons, you can adjust the parameters on the interface home page control temperature PLA / ABS preheat setting. PLA200°60°ABS240°70° PLA/ABS
11

11. Load Filament
When you wait for the temperature to rise,hang the filament over the Filament Holder.

For loading filament smoothly,the end of the filament should be placed as shown above.

11. Load Filament
Whe the current temperature reaches the target temperature,the consumables pass the material breakage detection,and are inserted into the small hole of the extruder until the position of the nozzle,If the consumables flow out at the nozzle,it means that the consumables have been loaded. Method of adjusting the tightness of the extrusion spring:Arrow to right is tightening,arrow to left is lossen.(As shown in figure A) A
13

12. WiFi Printing WiFi

1.Download 1.

2.Register 2.

3.Log in 3.

4. Scan QR Code 4.

5.Add equipment 5.

6. Setting 6.

7.Connect WiFi 7.WIFI

8.Select print model 8.

121. WStiaFirtPPrinritnintginWg iFi
>>
>>
Notes: The UI information is only for reference,the actual UI may be different. 15

121. WStiaFirtPPrinritnintginWg iFi
>>
>>
UI 16

13. Start Printing

>> 3. Select languageNextSelect your machineNextFinish. >>

1. Double click to install the software. | 2Double click to open the software. |

4.Open Creality 3D slicer LoadRead file) Select file. Load

3.NextNextFinish,. 17

13. Start Printing

5.Generate G-codeand save the gcode file to storage card. G

6.Insert the storage card Click print control Select the file to be printed.

File names must be Latin letters or numbers, not Chinese characters or other special symbols

Notes: For details on the software instructions, please refer to the slicing software manual in the memory card!

Warning: Please don't insert or remove TF card or SD card during printing. TFSD

13. Start Printing

14. Circuit Wiring

Y axis motor Y

Z1 axis motor Z1

Z2 axis motor Z2

Cable Port1 1

Storage Card Slot

Cable Port2 2
Fuse

WIFI Port WIFI
Screen Interface

Power Input Hot Bed Power Output Bed Thermistor Normal Fan Shutdown Module Y Limit switch

Reserved Port

WIFI Reset WIFI

15. Trouble-shooting
21

15.
22

16. FDM 3D PRINTING FILAMENTS

FDM 3D PRINTING FILAMENTS

Upgraded environmentally friendly formula, matte effect, high toughness, and fine printing. The raw materials are imported from the United States, besides, there are rich colors for customers to choose.

Targeting at mid-end users, CR series is with transparent tray plus black-white color box design. lts slight tolerance in wire diameter contributes to stable printing quality. CR series meets your demands of daily design and prototype making.

HC series is cost-efficient. It's widely applicable to general FDM printer product designs on the market to meet your daily design and different prototyping needs.

3D PRINTER UV SENSITIVE RESIN

Ender series is widely applied to general FDM printer design, which meet customers' needs of daily design and different prototyping needs.

Standard Resin Low shrinkage, fast printing speed, amlost odorless, and it's equipped with rigidity and toughness, suitable for printing common product prototypes and display models, that's also highly compatible with LCD printers.
Low Odor Resin Low odor, high precision, detail textures are very expressive. Good fluidity, high printing success rate. Rich colors, to meet the customer's color needs, preferred for animation manual, craft furnishing industry, etc..
ABS Like Resin With high hardness, high toughness of physical properties and strong impact resistance, it can be directly drilled on the finished models, mainly used in industrial prototype and other fields.
Dental Cast Resin Low shrinkage, due to the low shrinkage characteristics, the size is more accurate. It's not easy to deform under pressure after molding. Used for making porcelain teeth.
Elastic Resin Elastic Resin features good elasticity after high-strength extruding or stretching, widely applied to damping and contacting surfaces, etc., preferred to be used by people full of originality and ideas in design.
23

Water Washable Resin The model can be washed with water directly, and it's safe, environmentally friendly, with high surface accuracy, short cleaning time and low material cost. Water Washable Resin is currently one of the favorite new materials for schools, educational institutions and printing enthusiasts.
Dental Mode Resin The surface hardness is extremely high, scratch-resistant, and has low shrinkage characteristics. It is mainly used in dental implant restoration and invisible braces printing in medical dentistry.
Toughness Resin Toughness Resin is a medium-hard, wear-resistant, and repeatedly stretchable material. It is used in parts which need to be repeatedly stretched in friction devices.
High Temperature Resin High Temperature Resin is mainly used in making high temperature rubber molds, which can withstand temperatures of about 200 without cracking and maintain good strength, stiffness and thermal stability.
Jewelry Cast Resin Widely applied to jewelry industry. Excellent combustion performance, low expansion coefficient, combustion without residue. Forming process is stable without deformation. The finished product has smooth surface and high precision.

17. UV sensitive resin parameter information

Related Parameters
Viscosity

Standard Resin
150-250MPa·s (NDJ-8S Rotational Viscometer (25))

ABS Like Resin Dental Cast Resin

200-350MPa·s (NDJ-8S Rotational Viscometer (25))

50-170MPa·s (NDJ-8S Rotational Viscometer (25))

Elastic Resin
300-1000MPa·s (NDJ-8S Rotational Viscometer (25))

Water Washable Resin
100-350MPa·s (NDJ-8S Rotational Viscometer (25))

Dental Mode Resin
150-300MPa·s (NDJ-8S Rotational Viscometer (25))

Toughness Resin

High Temperature Resin

Jewelry Cast Resin

150-300MPa·s (NDJ-8S Rotational Viscometer (25))

100-150MPa·s (NDJ-8S Rotational Viscometer (25))

Absorption Band 355nm-410nm 355nm-410nm 355nm-410nm

385nm-410nm 385nm-410nm 355nm-410nm 355nm-410nm 355nm-410nm 355nm-410nm

Liquid Density

1.05-1.25g/cm³

1.05-1.13g/cm³

1.05-1.25g/cm³

1.05-1.13g/cm³

(Density meter (25)) (Density meter (25)) (Density meter (25)) (Density meter (25)) (Density meter (25)) (Density meter (25)) (Density meter (25)) (Density meter (25)) (Density meter (25))

Flexural Modulus 1.882-2.385Mpa 1.192-2.525Mpa 1.192-2.525MPa 1.882-2.385Mpa 1.882-2.385Mpa 1.882-2.385Mpa 1.882-2.385Mpa 1.882-2.385Mpa 1.192-2.525Mpa

Bending Strength
Heat Distortion Temperature
Thermal Expansion Coefficient

59-70MPa 80 95*E-6

Volume Shrinkage 3.72-4.24%

68-80MPa 80 95*E-6
3.72-4.24%

49-58MPa 75 95*E-6
1.88-2.45%

40-70MPa 80 95*E-6
3.72-4.24%

59-70MPa 80 95*E-6
1.56-1.95%

40-70MPa 80 95*E-6
3.72-4.24%

59-70MPa 220 95*E-6
3.72-4.24%

49-58MPa 65 95*E-6
4.06-5.08%

Linear Shrinkage 1.05-1.35%

1.05-1.35%

0.8-1%

1.05-1.35%

0.85-1.05%

1.05-1.35%

Tensile Strength

36-52MPa

42-62MPa

42-62Mpa

30-52MPa

42-62MPa

30-52MPa

36-52MPa

42-62MPa

Tensile Modulus 1.779-2.385MPa

Elongation at Break

11%-20%

1.86-2.645MPa 11%-21%

1.86-2.645MPa 11%-20%

1.779-2.385MPa 1.779-2.385MPa 1.779-2.385MPa 1.779-2.385MPa 1.779-2.385MPa 1.86-2.645MPa

200%

120%

11%-20%

130%

11%-20%

Shore Hardness

84D

75-80D

80-88D

20-30D

80-85D

82D

65-75D

86D

65D

Glass Transition Temperature
Solid Density

100

1.05-1.25g/cm³ 1.05-1.13g/cm³ 1.05-1.13g/cm³

100

1.05-1.25g/cm³ 1.05-1.25g/cm³ 1.05-1.25g/cm³ 1.05-1.25g/cm³ 1.05-1.25g/cm³ 1.05-1.13g/cm³

Notched Impact Strength

44-49J/

60-80J/

44-49J/

41-48J/

41-49J/

41-48J/

44-49J/

2118. Filaments Parameter Information

Material

Print Temp ()

Bed Temp ()

HP-PLA

PLA Series

HP-PLAx3 CR-PLA

HC/EN-PLA

ABS

PETG

TPU

Silk

Nylon
Carbon (Ordinary type) PDS Advertising word
filament-PLA
Low temperature filament-PCL

190-220 190-220 190-220 190-220 220-260 230-250 210-240 190-220 230-260 190-220 190-220 60-100

50-60 50-60 50-60 50-60 90-110 60-100
50 50-60 80-90 50-60 50-60
-

Difficulty

Flexibility Shrinkage

Ductility

Applicable Models
Suitable for 99% FDM models
Suitable for 99% FDM models
Suitable for 99% FDM models
Suitable for 99% FDM models Hot bed is needed, and Creality printer enclosure
is recommended for DIY machine Hot bed is needed, and Creality printer enclosure
is recommended for DIY machine Direct extrusion models
Suitable for 99% FDM models Hot bed is needed, and Creality printer enclosure
is recommended for DIY machine Suitable for 99% FDM models
Creality K5K8T5
Low temperature 3D printing pen

Creality Web

Creality Cloud

Add:18F, JinXiuHongDu Building, Meilong Blvd, Longhua Dist., Shenzhen, China 518131 Official Website: www.creality.com
Tel: +86 775-8523 4565 E-mail: info@creality.com cs@creality.com

www.creality.com vip.creality.com

19. 3D

FDM

FDM ,

LCD

ABS

200

20.

150-250MPa·s (NDJ-8S
(25))
355nm-410nm

ABS
200-350MPa·s (NDJ-8S
(25))
355nm-410nm

50-170MPa·s (NDJ-8S
(25))
355nm-410nm

300-1000MPa·s (NDJ-8S
(25))
385nm-410nm

100-350MPa·s (NDJ-8S
(25))
385nm-410nm

150-300MPa·s (NDJ-8S
(25))
355nm-410nm

100-150MPa·s (NDJ-8S
(25))
355nm-410nm

1.05-1.25g/cm³ ((25))

1.05-1.13g/cm³ ((25))

1.05-1.25g/cm³ ((25))

1.05-1.13g/cm³ ((25))

1.882-2.385Mpa 1.192-2.525Mpa 1.192-2.525MPa 1.882-2.385Mpa 1.882-2.385Mpa 1.882-2.385Mpa 1.882-2.385Mpa 1.882-2.385Mpa 1.192-2.525Mpa

59-70MPa

68-80MPa

49-58MPa

40-70MPa

59-70MPa

40-70MPa

59-70MPa

49-58MPa

220

95*E-6

3.72-4.24%

1.88-2.45%

3.72-4.24%

1.56-1.95%

3.72-4.24%

4.06-5.08%

1.05-1.35%

0.8-1%

1.05-1.35%

0.85-1.05%

1.05-1.35%

36-52MPa

42-62MPa

42-62Mpa

30-52MPa

42-62MPa

30-52MPa

36-52MPa

42-62MPa

1.779-2.385MPa 1.86-2.645MPa 1.86-2.645MPa 1.779-2.385MPa 1.779-2.385MPa 1.779-2.385MPa 1.779-2.385MPa 1.779-2.385MPa 1.86-2.645MPa

11%-20%

11%-21%

11%-20%

200%

120%

11%-20%

130%

11%-20%

84D

75-80D

80-88D

20-30D

80-85D

82D

65-75D

86D

65D

100

1.05-1.25g/cm³ 1.05-1.13g/cm³ 1.05-1.13g/cm³ 1.05-1.25g/cm³ 1.05-1.25g/cm³ 1.05-1.25g/cm³ 1.05-1.25g/cm³ 1.05-1.25g/cm³ 1.05-1.13g/cm³

44-49J/

60-80J/

44-49J/

41-48J/

41-49J/

41-48J/

44-49J/

21.

()

HP-PLA

190-220

PLA

HP-PLAx3 CR-PLA

190-220 190-220

HC/EN-PLA ABS PETG TPU Silk Nylon Carbon () -PLA -PCL

190-220 220-260 230-250 210-240 190-220 230-260 190-220 190-220 60-100

() 50-60 50-60 50-60 50-60 90-110 60-100 50 50-60 80-90 50-60 50-60 -

: 18 www.cxsw3d.com 400 6133 882 0755-8523 4565

99%FDM 99%FDM 99%FDM 99%FDM DIYCreality DIYCreality
99%FDM DIYCreality 99%FDM Creality K5K8T5

www.creality.com vip.creality.com
28

22.After-Sales Service Card

Hotline:+86 755-85234565

SHENZHEN CREALITY 3D TECHNOLOGY CO., LTD.
Add:18F,JinXiuHongDu Building, Meilong Blvd., Longhua Dist.,
Shenzhen, China 518131 Official Website: www.creality.com Tel+86 755-8523 4565 E-mail: info@creality.com cs@creality.com

Scan To Learn More

18F www.cxsw3d.com 400 6133 882 0755-8523 4565

References

Adobe PDF library 15.00

3008010357-CR-10 Smart-说明书-中英文-转曲-材质：157g 铜版纸 双面彩印-尺寸：210×140mm-V1.0-20210329

Bedienungsanleitung 2544039 Creality CR-10 Smart 3D Drucker.

References

3008010357-CR-10 Smart-说明书-中英文-转曲-材质：157g 铜版纸双面彩印-尺寸：210×140mm-V1.0-20210329