CP PLUS V32G Camera User Guide
Thank you for choosing CP PLUS ezykam. Get started using your new devices by downloading ezykams app, ‘one convenient app that manages everything straight from your smart phone. Easily connect to your home Wi-Fi and control multiple devices from the touch of your fingertips
What’s in the Box
ezykam
Screw
Bracket
Waterproof Cap
Power Adapter
Quick Operation Guide
Get Ready
- Knowyour Wi network and password.
- Make sure your mobile device is running 105° 9.0 or higher or Android™ 4.4 or higher. – Make sure you’re connecting to a 2.4GHz Wi-Fi network (It can’t connect to SGHz networks)
Download the ezykam+ app from App Store or Google Play.
Register an account on your ezykam+app.
- STEP 1: Select the country.
- Enter the email address.
- STEP 2: Enter the verification code and Create password
Plugin
How dol reset my camera?
- Use the reset pin to press the Reset Button for several seconds until hear the reset beep sound. Camera will be reboot.
- Optional Insert Micro SD card.
Add Camera
- Open ezykam+ app, cick “+*on the top right corner of the “HOME” page, then select Specific model to add”.
- Power on the camera. Kindly make sure internet is connected on camera,
- Align the QR code or barcode In the frame and scan It
Add Camera
- APP will scan the Device in network & after device will be searched it will Register on the cloud. After that device will added successfully.
Status light prompt of 4G camera tail line 4G mode:
Slow flashing:
The 4G module is abnormal or the SiM card is abnormal and flashes once every 2s.
Fast flashing:
No dialing number (no flow or bad signal), flashing once every 0.5
Always on:
The network is normal.
Onvif Support
-
- Camera can be added n any On vif Compliant devices using On vif protocol. Camera can be added with port-8888in any NVR/DVR
System Requirements
- Smartphone running i05* 9.0 or higher or Android™ 800r higher
- Existing Wi-Fi Network with internet connection
Technical Specifications
- Camera: up to 3P (2304×1296) at 15frames / sec. H.265 encoding – Audio: Internal Speaker and Microphone:
- Storage: supports up to 256 GB Micro SD card (not included)
- IEEE 802.11b/g/n, 24GHz (not compatible with 5GHz Wi-Fi networks)
Frequently Asked Questions 3CPPLUS
Can| share camera with family and friends?
Which SIM card is supported ?
‘The camera appears offline or unreachable?
Cannot connect to your SIM network?
How many cameras can | control?
Thank you for choosing CPPlus ezykam.
For further assistance, you can reach us via
ezycare@cpplusworld.com
** Please read the instruction carefully before using the product **
Documents / Resources
 | V32G Camera |
References
- User Manualmanual.tools
Wrongly camera is bounded to a coustomer. But the camera is returned. I am trying to to add on other account but the device is already bounded to other account. So what to do for unbind
How do I unbind a CP PLUS V32G camera from a previous account?
To unbind a CP PLUS V32G camera that is already linked to another account, you should follow these steps:
When contacting support, be prepared to provide the camera's serial number (S/N) or a photo of the QR code label on the device to prove you have physical possession of the unit.
Read the full Q&A page
i BOUGHT CP-V32G sim based camera for my civil work site the main problem is that i can hear audio from work site. When i tried to talk to those at site the volume is very very low and even the siren is of less volume which cant be heard atleast 3 mtrs away.
what is the problem with my camera , how to increase volume of my camera speaker so that if i talk from out side those at site must hear atleast for a distance of 20 feet
what is the problem with my camera , how to increase volume of my camera speaker so that if i talk from out side those at site must hear atleast for a distance of 20 feet
How can I increase the volume of the speaker on my CP-V32G camera for two-way talk and siren, so that people at the site can hear me from a distance of 20 feet?
The CP PLUS V32G camera features an "Internal Speaker and Microphone" for audio. While the manual confirms the presence of these components, it does not provide specific instructions or settings for adjusting the speaker volume directly on the camera or through the ezyKam+ app. The app description for ezyKam+ does mention "Two Way Talk" support, and an older version (2.0.2) had a fix for "Audio issue while two way talk," suggesting that audio functionality is managed through the app.
Given the lack of explicit volume controls in the provided documentation, it's possible that the speaker volume is fixed or automatically adjusted. If you are experiencing very low volume, it could indicate a hardware issue or a software setting that isn't immediately obvious. For further assistance and to troubleshoot this specific problem, it is recommended to contact CP PLUS support directly. You can reach them via email at ezycare@cpplusworld.com or support@cpplusworld.com, or by phone at +91 88009 52952.
Read the full Q&A page