Star9 Max
QUICK GUIDE
For more information
- Consult the quick guide in the packing box.
- Open tablet service and enjoy the following services:
- Consult the manual
- Get help through various channels such as self-service, intelligent questioning and answering, manual service, and question feedback. In addition, you can search for stores, service networks, and service policies.
- Open setting>About tablet > Law information, consult law information.
Tablet appearance

Card insertion guidance
Tips:
- Pay attention to the direction of inserting the SIM & Micro SD card, as the picture guidance

- Please use the standard Micro-SIM card. Insertion of an unqualified card may damage the SIM card support.
Mobile network
- Start up the tablet through a long touch power button.
- Follow the screen tips and enter the Home Screen.
Settings>Network&Internet>Mobile network, open 4G data

Safety information
- Incompatible or unauthorized power supply, charger, and battery may cause fire, explosion, or other hazards.
- Only the accessories accepted by the manufacturers and matched with the type can be used. Only certain types of accessories may cause accidents and violate the warranty and related national regulations. Please contact with authorized service center for recognized accessories.
- Please do not use high volume for a long time to protect hearing.
- Please use the device at the temperature from -20°C-70°C. Too high or too low temperature may cause device failure.
- Do not expose the device or battery to high temperature place or heat-releasing equipment, such as sunshine, heater, microwave oven, water heater, etc. Battery overheating may cause explosion.
- When charging the device, power socket should be equipped at places near device accessory.
- Please disconnect the charger from the device, and unplug it when it is fully charged or uncharged.
- If the device is equipped with a non-removable internal battery, do not replace the battery in case of battery or device damage. The battery can only be replaced by authorized service centers.
- This device, battery, and other accessories should be disposed of in accordance with local regulations instead of treating them as domestic garbage. Improper battery treatment may cause a battery explosion.
Privacy protection
- Upgrading firmware and system with unauthorized third-party software may cause device failure or personal information leakage.
- Online upgrading and downloading of matched official software are recommended.
- Please back up your personal information before upgrading, as your personal information may be removed.
Safety standards
- Content of harmful substances in this homogeneous material is below the limit of the GB/T26572 standard.
- The harmful substance content of this homogeneous material at least exceeds the limit of the GB/T26572 standard. However, there is no better alternative at present. Thus, it meets the environmental protection requirements of EU RoHS.
- The number on this logo indicates that its normal EPUP is 20 years. Some accessories may also have the EPUP logo, and the number in the logo prevails. This product may not include all the accessories due to different types, and it should be subject to the actual configuration.
| Name and content of harmful substance | ||||||
| Spare part | harmful substance | |||||
| Pb | Hg | Cd | Cr(VI) | PBB | PBED | |
| Device | x | • | • | • | • | |
| Charger | x | • | • | • | • | • |
| Earphone | x | • | • | • | • | • |
| Battery | x | • | • | • | • | • |
| Cable | • | • | • | • | • | • |
GSM: 850/900/1800/1900MHz
WCDMA: B1/B2/B5/B8
LTE-FDD: B2/B3/B4/B7/B8/B12/B17/B28ab
FCC Caution:
Part 15.21
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Part 15.19
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Part 15.105
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Statement:
This radio is designed for and classified as “General population/uncontrolled Use”; the guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.
Body operation; this device was tested for typical body operations, keeping 0mm for body-worn. To maintain compliance with RF exposure requirements, use accessories that maintain a 0mm distance for body-worn.
Documents / Resources
![]() | Star9 Max Tablet |
References
- User Manualmanual.tools
